Control System Engineer – Site Services

كونسيست; Kuwait City; On-site; KWD 15,000 - 21,000; Full time

Job summary

Consyst is seeking a Control System Engineer to join its Site Services team for projects across Kuwait, Oman, and the GCC. The role covers on-site commissioning, maintenance, and troubleshooting of PLC, SCADA, and HMI-based control systems across Rockwell, Siemens, and Schneider Electric platforms, along with networking and virtualization.

You will work directly at customer sites, supporting FAT/SAT activities, AMC engagements, and preparing the site documentation that keeps projects and service

Qualifications

• Hands-on experience with on-site commissioning and maintenance of automation/control systems.
• Ability to work across Rockwell, Siemens, and Schneider Electric platforms.
• Proficiency in configuring PLC/SCADA/HMI and associated networking.
• Experience with virtualization, NAS storage, and remote desktop environments.
• Knowledge of industrial communication protocols (Modbus, Profibus/Profinet, MQTT).
• Ability to read electrical diagrams and loop drawings; strong field instrumentation exposure.
• Compliance with safety standards (PTW, safe work practices).
• Team coordination and customer-facing communication skills.

Responsibilities

• Commission on-site automation systems (PLC/SCADA/HMI) per project specs.
• Oversee on-site activities: panel installation, cable laying, terminations, equipment setup.
• Perform I/O wiring verification and loop checks between PLCs and devices.
• Configure and validate PLC/HMI/SCADA programs per project specs.
• Execute interlock testing and logic validation per FDS.
• Configure and test communication protocols (Modbus, Profibus/Profinet, MQTT).
• Configure/maintain virtualization environments and network infrastructure for control systems.
• Prepare site documentation: pre-commissioning checklists and commissioning plans.

Skills

On-site commissioning

Maintenance

Troubleshooting

PLC programming

SCADA engineering

Networking

VM virtualization

Safety compliance

Technical coordination

Education

Electrical & Electronics

Electronics & Instrumentation

Electronics & Communication

Tools

Aveva InTouch

Aveva Edge

System Platform

ArchestrA

WinCC

FactoryTalk SCADA

Rockwell ControlLogix

Siemens S7-1200/1500

Schneider Electric M580/M340

Job description

Control System Engineer – Site ServicesLocation: KuwaitOpenings: 1

Position Overview:

Consyst is looking for a Control System Engineer to join its Site Services team for projects across Kuwait, Oman and other GCC countries. The role covers on-site commissioning, maintenance, and troubleshooting of PLC, SCADA, and HMI-based control systems across Rockwell, Siemens, and Schneider Electric platforms, along with associated networking, virtualization, and field instrumentation. The engineer will work directly at customer sites, supporting FAT/SAT activities, AMC engagements, and preparing the site documentation that keeps projects and service contracts running smoothly.

Responsibilities:

• Commission industrial automation systems on-site, including PLCs, SCADA, HMIs, and field instruments.
• Supervise on-site activities: panel installation, cable laying, terminations, and equipment setup.
• Perform I/O wiring verification and loop checks between PLCs and field devices.
• Download, configure, and validate PLC and HMI/SCADA programs as per project specifications.
• Execute interlock testing and logic validation as per functional design.
• Configure and test communication protocols such as Modbus RTU, Modbus TCP, Profibus, Profinet, DNP3, IEC 61850, IEC 104, and MQTT.
• Configure and maintain virtualization environments (virtual machines), NAS storage, remote desktop access, and thin/thick client setups for control system infrastructure.
• Configure and troubleshoot network switches, including VLAN setup, port management, and network topologies such as DLR and PRP.
• Interpret electrical wiring diagrams, P&IDs, and loop drawings during commissioning and troubleshooting.
• Work with field instrumentation such as PT, TT, DPT, control valves, SOVs, and MOVs, and verify their integration with the control system.
• Coordinate with the Engineering team for resolution of site-raised Technical Queries (TQs).
• Front-end with customers on-site for technical discussions, progress updates, and issue resolution.
• Assist in Factory Acceptance Tests (FAT) and lead Site Acceptance Tests (SAT) at site.
• Handle Control System AMC tasks and PM activities: system inspections, preventive maintenance, and repairs.
• Prepare and maintain site documentation including pre-commissioning checklists, site survey reports, PM reports, commissioning plans and reports, SAT reports, and as-built markups.
• Follow permit-to-work (PTW) procedures and ensure compliance with safety regulations and quality standards during all commissioning and maintenance activities.

Must Have Requirements:

• Degree in Electrical & Electronics, Electronics & Instrumentation, Electronics & Communication, or related field.
• Minimum 4+ years of experience in commissioning and maintenance of industrial automation/control systems in process intensive industries (Oil and Gas experience preferred).
• Hands‑on experience with Rockwell ControlLogix PLC systems, Siemens S7-1200/S7-1500, and/or Schneider Electric M580/M340 platforms.
• Proficiency with Aveva InTouch, Aveva Edge, System Platform, ArchestrA, WinCC, and FactoryTalk SCADA.
• Ability to write and understand PLC logic in Ladder Logic (LD), Structured Text (ST), Function Block Diagram (FBD), and similar languages.
• Understanding of software coding/scripting used in SCADA and PLC systems.
• Working knowledge of virtualization (VMs), NAS, remote desktop, and thin/thick client environments.
• Experience with network switch configuration (VLAN, port management) and understanding of network topologies such as DLR and PRP.
• Knowledge of industrial communication protocols: Modbus RTU, Modbus TCP, Profibus, Profinet, IEC 61850, IEC 104, and MQTT.
• Understanding of Serial (RS232/RS485), Ethernet, and Fiber Optic (FO) networks.
• Ability to read and interpret electrical wiring diagrams, P&IDs, loop drawings, and relevant control system documents.
• Understanding of field instrumentation: PT, TT, DPT, control valves, SOVs, and MOVs.
• Working knowledge in condition monitoring systems, like CBM and VMS.
• Working knowledge of hazardous area classification (ATEX/IECEx) and safety practices on O&G sites.
• Ability to work independently and collaboratively in cross-functional teams.