Software Engineer – Motor Control & Embedded Systems

Raptee.HV; Chennai District; On-site; INR 1,500,000 - 2,600,000; Full time

Job summary

Raptee.HV, a Chennai-based full-stack electric motorcycle startup, is seeking a Software Engineer in Motor Control. You will work at the intersection of control theory, embedded software, and system architecture to design control logic, shape the MCU platform, and ensure PMSM controllers balance performance, efficiency, and drivability.

You will simulate motor control against vehicle-level goals, tune strategies for regen, energy efficiency, and ride quality, and collaborate with hardware and

Qualifications

• BE/BTech or ME/MTech in Electrical, Electronics, Control Systems, or Computer Engineering.
• Strong MATLAB/Simulink expertise for motor control design and deployment.
• Solid PMSM motor theory (FOC, torque/regen control, sensorless methods).
• Hands-on embedded software design: task scheduling, cooperative schedulers, interrupt handling.
• Familiarity with RTOS concepts and migration strategies.
• Deep understanding of CAN communication (arbitration, diagnostics).
• Experience collaborating on microcontroller selection and pin mapping with hardware engineers.
• Proven ability to tune and validate controllers in lab/dyno environments.

Responsibilities

• Develop motor control algorithms (FOC, torque/regen strategies) and implement in MATLAB/Simulink.
• Design and manage multi-rate cooperative schedulers for control tasks.
• Collaborate on MCU selection and pin mapping; define clock speed, memory, peripherals.
• Implement robust CAN communication and diagnostics.
• Tune controllers for regen profiles, drive cycles, efficiency maps, and thermal constraints.
• Tune and validate controllers on dyno benches and in-vehicle trials.
• Document control models, scheduling diagrams, and software architecture.

Skills

Motor control theory

CAN communication

RTOS concepts

Embedded software design

Sensorless/sensored methods

Education

B.E./B.Tech or M.E./M.Tech in Electrical, Electronics, Control Systems, or Computer Engineering

Tools

MATLAB/Simulink

C/C++

CAN

SPI

I2C

UART

Job description

Who Are We

Raptee.HV is a full- stack electric motorcycle startup with a very strong technical moat, founded in 2019 by four engineers from Chennai (Ex Tesla, Wipro), working on bringing a no-compromise upgrade motorcycle to an otherwise scooter- only EV market. Raptee.HV is incubated at CIIC & ARAI.

Who Are We

Raptee.HV is a full- stack electric motorcycle startup with a very strong technical moat, founded in 2019 by four engineers from Chennai (Ex Tesla, Wipro), working on bringing a no-compromise upgrade motorcycle to an otherwise scooter- only EV market. Raptee.HV is incubated at CIIC & ARAI.

Role Overview

As a Software Engineer in Motor Control, you will work at the intersection of control theory, embedded software, and system architecture. You’ll design the control logic, help shape the MCU platform, and ensure that our PMSM controllers balance performance, efficiency, and drivability. Your work will directly influence regen feel, energy efficiency, and ride quality, while also shaping the embedded software foundation of our next-generation controllers.

Key Responsibilities

• Motor Control Algorithm Development
• Design and implement PMSM motor control algorithms (FOC, torque/regen strategies) in MATLAB/Simulink.
• Optimize models for real-time execution on embedded targets.
• Integrate algorithms with vehicle-level requirements such as regen profiles, drive cycles, and efficiency maps.
• Embedded Software Architecture
• Design and manage multi-rate cooperative schedulers for control tasks.
• Contribute to the migration toward RTOS-based architectures for scalability and robustness.
• Ensure deterministic timing and synchronization across control, comms, and diagnostic tasks.
• Microcontroller Selection & System Integration
• Collaborate with the hardware team to select appropriate microcontrollers.
• Define software requirements for clock speed, memory, peripherals, ADC resolution, PWM frequency, and comms interfaces (CAN, SPI, I2C, UART).
• Participate in pin mapping decisions to balance hardware constraints with software scheduling needs.
• Ensure MCU selection aligns with control-loop timing and future scalability.
• Communication & Integration
• Implement robust CAN communication, including message prioritization, diagnostics, and fault handling.
• Collaborate with hardware engineers on control signal mapping and sensor interfacing.
• Work with firmware engineers to integrate algorithms into embedded platforms.
• Vehicle-Level Perspective
• Conduct simulations that link motor control to vehicle performance (regen recovery, loss analysis, range impact).
• Tune strategies to balance drivability, efficiency, and thermal constraints.
• Contribute to higher-level functions such as traction control or torque-limiting logic.
• Testing & Validation
• Tune and validate controllers on dyno test benches and in-vehicle trials.
• Debug system-level issues that span across hardware, firmware, and software.
• Documentation
• Maintain control models, scheduling diagrams, and software architecture documentation.

Who Can Apply?

• B.E./B.Tech or M.E./M.Tech in Electrical, Electronics, Control Systems, or Computer Engineering.
• Strong expertise in MATLAB/Simulink for motor control algorithm design and deployment.
• Solid understanding of PMSM motor theory (FOC, torque/regen control, sensorless/sensored methods).
• Hands-on experience with embedded software design: task scheduling, cooperative schedulers, interrupt handling.
• Familiarity with RTOS concepts and migration strategies.
• Deep understanding of CAN communication (message arbitration, diagnostics, protocol layering).
• Experience collaborating on microcontroller selection and pin mapping with hardware engineers.
• Proven ability to tune and validate controllers in lab/dyno environments.

Nice-to-Have

• Proficiency in C/C++ for embedded targets.
• Familiarity with HIL testing or rapid prototyping.
• Exposure to AUTOSAR or advanced automotive comms stacks.
• Knowledge of functional safety (ISO 26262).

What’s In It For You

• Opportunity to work in a fast-paced and dynamic environment.
• Opportunities for professional advancement as the company undergoes expansion.
• A culture that fosters collaboration and creativity within the team.
• Collaborate closely with seasoned experts in the field.