Safety Supervisor

Swid Process Technologies Pvt. Ltd.

Pune

On-site

INR 450,000 - 750,000

Full time

47 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Swid Process Technologies Pvt. Ltd. in Pune seeks a Safety Officer to supervise frontline safety and verify controls before work. You will intervene in unsafe acts, maintain permits and DWR records, and ensure compliance with site safety plans.

Reporting to the Safety Manager, you will guide the Safety Supervisor, run toolbox talks, perform site inspections and ensure PPE, permits and JSA understanding before work starts. A strong zero-incident mindset is essential.

Qualifications

  • Safety diploma/certificate with construction/EPC exposure.
  • 2+ years in site safety; rooftop work-at-height experience preferred.
  • Practical knowledge of PPE, PTW, lifelines, ladders/scaffolds, electrical and lifting controls.
  • Physically fit for site rounds and trained in emergency/rescue response.
  • Clear communication, firmness, accurate reporting and independence.

Responsibilities

  • Verify attendance fitness, PPE, permits, JSA understanding and toolbox talk before work starts.
  • Inspect lifelines, anchors, ladders, scaffolds, access, barricading, lifting tools, electrical isolation and housekeeping.
  • Continuously patrol active work fronts and correct unsafe behavior immediately.
  • Stop work where critical controls are absent and inform the Safety Manager and execution lead.
  • Record observations with evidence and verify closure before restart.
  • Maintain daily permits, inspections, training, equipment and incident/near-miss records.
  • Supervise assigned direct reports, allocate work, review records and verify closure against applicable targets.
  • Maintain and update the Daily Work Report (DWR) every working day with tasks, progress, results, pending actions, blockers and supporting evidence.

Skills

Site safety experience
Work-at-height awareness
Emergency/rescue training

Education

Safety diploma/certificate with construction/EPC exposure

Tools

PPE & PTW knowledge
Lifelines and fall protection
Ladders and scaffolds
Electrical isolation controls

Job description

Source: SWID Interactive Master Role Bank, IV4; revised 15 October 2026. Source workbook supplied on 12 November 2026.

Designation

Safety Officer

Department

Operations

Reports To

Safety Manager

Direct Reports

Safety Supervisor

Backup Coverage

Another qualified Safety Officer or Safety Manager

Role Purpose

Provide continuous frontline safety supervision, verify controls before work and intervene immediately in unsafe acts or conditions.

Job Description and Responsibilities
  • Verify attendance fitness, PPE, permits, JSA understanding and toolbox talk before work starts.
  • Inspect lifelines, anchors, ladders, scaffolds, access, barricading, lifting tools, electrical isolation and housekeeping.
  • Continuously patrol active work fronts and correct unsafe behavior immediately.
  • Stop work where critical controls are absent and inform the Safety Manager and execution lead.
  • Record observations with evidence and verify closure before restart.
  • Maintain daily permits, inspections, training, equipment and incident/near-miss records.
  • Supervise assigned direct reports, allocate work, review records and verify closure against applicable targets.
  • Maintain and update the Daily Work Report (DWR) every working day with tasks, progress, results, pending actions, blockers and supporting evidence.
Daily Modus Operandi
  • Review work plan and prepare activity-specific permits/checklists.
  • Inspect PPE, access and critical equipment before entry/start.
  • Conduct or verify toolbox talk and worker understanding.
  • Patrol all active work fronts and record observations.
  • Stop unsafe work, secure the area and obtain correction.
  • Verify closure and authorization before restart.
  • Submit daily safety records, evidence and DWR.
  • Update DWR daily in the company-provided software and share with the reporting manager.
Role Boundary

This role remains accountable for the outputs listed above even when work is delegated. During absence or vacancy, the named backup may perform essential transactions within documented authority. Technical approvals, commercial commitments, safety waivers and quality acceptance may be exercised only by a competent and authorized person. Handover must include current trackers, pending actions, access credentials under approved custody, documents and due dates.

Key Result Areas
  • Daily work-front control
  • PPE and work-at-height compliance
  • Permit and JSA implementation
  • Unsafe-act intervention
  • Inspection records and closure
  • Emergency readiness
  • Daily Work Report completeness and accuracy
Key Performance Indicators
  • 1. Safety readiness before work starts | Target: 100% before work starts | Review: Daily
  • 2. Daily inspections and toolbox talks | Target: 100% active site-workday coverage | Review: Daily
  • 3. PPE and high-risk work compliance | Target: 100% applicable PPE/permit compliance | Review: Daily
  • 4. Immediate stop-work and verified critical-hazard correction | Target: Immediate stop-work; verify correction before restart | Review: Per hazard
  • 5. Other safety issues closed within 48 hours | Target: Within 48 elapsed hours | Review: Per finding
  • 6. Inspection and corrective-action records | Target: 100% complete findings and corrective-action evidence | Review: Daily
  • 7. DWR updation and accuracy | Target: 100% of working days with a complete, accurate DWR | Review: Daily
KPI Measurement Method
  • 1. Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
  • 2. Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
  • 3. Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
  • 4. Critical hazards stopped and corrected before restart / critical hazards identified x 100.
  • 5. Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
  • 6. Correct records or items / records or items checked x 100; retain the review evidence.
  • 7. Working days with a complete and accurate DWR / working days due x 100; verify work evidence, progress, blockers and manager review.
KPI Weights
  • 1. Safety readiness before work starts: 20%
  • 2. Daily inspections and toolbox talks: 25%
  • 3. PPE and high-risk work compliance: 20%
  • 4. Immediate stop-work and verified critical-hazard correction: 20%
  • 5. Other safety issues closed within 48 hours: 10%
  • 6. Inspection and corrective-action records: 5%
  • 7. DWR updation and accuracy: 0%
Performance Framework

Review performance monthly using the specified KPI periods and evidence. Weights total 100% and express relative importance. Assess each KPI against its stated target and approved weight. Non-Sales roles have no exceeds-expectations band. Mandatory requirements remain applicable regardless of weight. Where no activity is due, record not applicable with the reason; do not record zero or invent achievement.

Target Rules

Start = later of customer project approval or receipt of at least 10% of signed order value. Let B = ceiling(project kWp / (150 x approved assigned teams)); teams must be at least one. Generation-initiation duration D = min(60, 15 x B) calendar days. Punch points raised by Quality or customer: close by start + D + 15 days. DISCOM/CEIG approvals: obtain by start + D + 30 days. Handover occurs on approval receipt with all punch points closed. Customer-payment delays extend dates only for documented days blocking planned work; count overlapping blocked days once. All project days include weekends and holidays. Example: 900 kWp with three teams gives 30/45/60 days. Staff the approved plan to meet the 60-day cap. Blockers close within 48 elapsed hours. Required Quality stages: before project start; after safety arrangements; after structure mounting; after AC completion; after DC completion before commissioning; after commissioning; and after punch-point/snags closure. Complete and evidence all seven stages. Critical safety hazards require immediate stop-work and verified correction before resumption; other safety issues close within 48 elapsed hours.
DWR is mandatory for every role: update every working day. It is monitored as a separate compliance requirement with no additional weight; existing KPI weights remain unchanged.

Total KPI Weight

100%

Approval Status

Approved targets retained; hierarchy revised

KPI Register — Detailed Records

Safety readiness before work starts
Department: Operations
Target: 100% before work starts
Review: Daily
Measurement method: Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
Weight: 20%
Status: Approved targets retained; hierarchy revised

Daily inspections and toolbox talks
Department: Operations
Target: 100% active site-workday coverage
Review: Daily
Measurement method: Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
Weight: 25%
Status: Approved targets retained; hierarchy revised

PPE and high-risk work compliance
Department: Operations
Target: 100% applicable PPE/permit compliance
Review: Daily
Measurement method: Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
Weight: 20%
Status: Approved targets retained; hierarchy revised

Immediate stop-work and verified critical-hazard correction
Department: Operations
Target: Immediate stop-work; verify correction before restart
Review: Per hazard
Measurement method: Critical hazards stopped and corrected before restart / critical hazards identified x 100.
Weight: 20%
Status: Approved targets retained; hierarchy revised

Other safety issues closed within 48 hours
Department: Operations
Target: Within 48 elapsed hours
Review: Per finding
Measurement method: Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
Weight: 10%
Status: Approved targets retained; hierarchy revised

Inspection and corrective-action records
Department: Operations
Target: 100% complete findings and corrective-action evidence
Review: Daily
Measurement method: Correct records or items / records or items checked x 100; retain the review evidence.
Weight: 5%
Status: Approved targets retained; hierarchy revised

DWR updation and accuracy
Department: Operations
Target: 100% of working days with a complete, accurate DWR
Review: Daily
Measurement method: Working days with a complete and accurate DWR / working days due x 100; verify work evidence, progress, blockers and manager review.
Weight: 0%
Status: Mandatory requirement; no separate weight

  • 1. Safety diploma/certificate with construction/EPC exposure.
  • 2. 2+ years in site safety; rooftop work-at-height experience preferred.
  • 3. Practical knowledge of PPE, PTW, lifelines, ladders/scaffolds, electrical and lifting controls.
  • 4. Physically fit for site rounds and trained in emergency/rescue response.
  • 5. Clear communication, firmness, accurate reporting and independence.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Project Engineer
Project Engineer

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 600,000 - 900,000
Safety Manager
Safety Manager

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 1,200,000 - 2,400,000
Project Manager
Project Manager

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 1,200,000 - 2,400,000
Site Engineer DC
Site Engineer DC

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 350,000 - 650,000
Regulatory and Liaison Officer
Regulatory and Liaison Officer

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 600,000 - 900,000
Service Engineer
Service Engineer

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 550,000 - 900,000
Regulator and Liaison Manager
Regulator and Liaison Manager

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 900,000 - 1,300,000
Service Technician
Service Technician

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 167,000 - 312,000
Project Coordinator
Project Coordinator

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 400,000 - 700,000
Solar Care Supervisor
Solar Care Supervisor

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 300,000 - 500,000