J_1280 - Power Electronics Hardware Design Engineer

Speed Global; Pune District; On-site; INR 900,000 - 1,300,000; Full time

Job summary

Speed Global in Pune, Maharashtra, is seeking a Power Electronics Hardware Design Engineer with 3–4 years of experience for a full-time role. The job involves designing multi-layer PCBs for power electronics, BOM generation, and optimising layouts for high-power applications including motor drives and BMS.

The candidate should be proficient in KiCad or other tools and have hands-on experience with SPICE simulations, EMI/EMC/UL guidelines, and hardware prototyping support.

Qualifications

• Experience in schematic and PCB layout generation.
• Experience with EMI/EMC/UL guidelines is a plus.
• Hands-on with power electronics hardware design.

Responsibilities

• Good understanding of power electronics & electrical fundamentals.
• Design multi-layer PCBs for power electronics applications including AC-DC/DC-DC converters, inverters, motor drives, and BMS.
• Shall be able to make the electronics hardware BOM as per the requirement of the mechatronic system.
• Shall know the alternate ways of doing things, to reduce hardware costs, reduce hardware size, etc.
• Good knowledge of power semiconductor devices (MOSFETs, IGBTs), gate drivers, magnetics, and their suitability for specific power electronics applications.
• Good knowledge about microcontrollers, motor/actuator drivers and peripheral circuitry, and their suitability with the application.
• Candidate shall be able to work on microcontroller and peripheral circuitry like SPI, UART, I2C, ADC, reset, hardware watchdogs, external memory interfaces like RAM, ROM.
• Candidate shall be able to understand microcontroller datasheets and figure out various PAD and resistor settings for GPIO, ADC, DAC, TIMER, communication signals, PLL to help the software development team.
• Design of PCBs as per the requirements, including schematic capture, layout, stack-up, and component selection (MOSFETs, IGBTs, gate drivers, magnetics, capacitors).
• Perform current-carrying capacity, trace width, and copper thickness calculations for high-power layouts.
• Design and optimize PCB stack-ups for high-voltage isolation, creepage, and clearance requirements per IPC and safety standards.
• Ensure designs comply with IPC-2221, IPC-6012, UL, and relevant safety/EMI standards (CE, FCC, etc.).
• Generate and review Gerber files, BOMs, fabrication drawings, and assembly documentation.
• Support prototypes bring-up, debugging, and design validation testing (power, thermal, EMI).

Skills

Power electronics

PCB design

Schematic capture

KiCad

Altium Designer

Cadence Allegro

OrCAD

Mentor Graphics PADS/Xpedition

SPICE simulation

EMI/EMC/UL guidelines

SMD soldering

Oscilloscopes

Tools

KiCad

Altium Designer

Cadence Allegro

OrCAD

Mentor Graphics PADS/Xpedition

Job description

J_1280 - Power Electronics Hardware Design Engineer

3 to 4 Years

Pune, Maharashtra

Full-Time

Key Responsibilities:

• Good understanding of power electronics & electrical fundamentals.
• Design multi-layer PCBs for power electronics applications including AC-DC/DC-DC converters, inverters, motor drives, and battery management systems (BMS).
• Shall be able to make the electronics hardware BOM as per the requirement of the mechatronic system.
• Shall know the alternate ways of doing things, to reduce hardware costs, reduce hardware size, etc.
• Good knowledge of power semiconductor devices (MOSFETs, IGBTs), gate drivers, magnetics, and their suitability for specific power electronics applications.
• Good knowledge about microcontrollers, motor/actuator drivers and peripheral circuitry, and their suitability with the application.
• Candidate shall be able to work on microcontroller and peripheral circuitry like SPI, UART, I2C, ADC, reset, hardware watchdogs, external memory interfaces like RAM, ROM.
• Candidate shall be able to understand microcontroller datasheets and figure out various PAD and resistor settings for GPIO, ADC, DAC, TIMER, communication signals, PLL to help the software development team.
• Design of PCBs as per the requirements, including schematic capture, layout, stack-up, and component selection (MOSFETs, IGBTs, gate drivers, magnetics, capacitors).
• Perform current-carrying capacity, trace width, and copper thickness calculations for high-power layouts.
• Design and optimize PCB stack-ups for high-voltage isolation, creepage, and clearance requirements per IPC and safety standards.
• Ensure designs comply with IPC-2221, IPC-6012, UL, and relevant safety/EMI standards (CE, FCC, etc.).
• Generate and review Gerber files, BOMs, fabrication drawings, and assembly documentation.
• Support prototypes bring-up, debugging, and design validation testing (power, thermal, EMI).

Skills and Experience Required:

• Candidate shall have hands-on experience in schematic and PCB layout generation in KiCad and/or other PCB design tools (Altium Designer, Cadence Allegro, OrCAD, Mentor Graphics PADS/Xpedition) Added advantage if candidate has experience designing PCB layouts per EMI/EMC/UL guidelines.
• Candidate shall have experience in circuit simulation (SPICE or equivalent) for power electronics circuits in any tool.
• Added advantage with PCB design experience for automotive or other complex mechatronic power electronics systems.
• Candidate shall have experience around electronic product manufacturing like SMD, THT component soldering, HAT, in circuit tester etc.
• Candidate shall have hands on experience in operating instruments like Automated DC/AC Power supply, Oscilloscopes, DMM, Frequency generators, Arbitrary waveform generators added advantage if worked on Data Acquisition systems.

Required Skills

PCB Design Tools electronichardware design within an R&D / NPD setup PCB Design