Electronics Hardware Design Engineer

BARCO; Dadri; Vor Ort; INR 900.000 - 1.500.000; Vollzeit

Zusammenfassung

Barco is seeking an Electronics Hardware Designer to join its R&D team in Noida to advance LED display technology. You will configure LED driver ICs, optimize PWM and grayscale control, and collaborate with FPGA, firmware, and manufacturing teams to deliver robust display solutions.

The role requires a strong foundation in electronics engineering, experience with LED drivers and display calibration, and hands-on lab work with oscilloscopes and power supplies.

Qualifikationen

• Bachelor's degree in Electronics Engineering or equivalent by experience.
• Strong foundation in electrical engineering fundamentals.
• Experience with LED driver ICs and LED displays.
• Knowledge of PWM, multiplexing, grayscale control, and constant-current drivers.
• Familiarity with display calibration concepts including gamma, color temperature, and luminance.
• Experience with laboratory instruments such as oscilloscopes and power supplies.
• Desirable scripting knowledge (Python, C/C++, MATLAB).
• Experience with fine-pitch LED displays and image quality calibration techniques.
• Experience working with LED driver vendors and display manufacturers.
• Ability to analyze electrical waveforms and troubleshoot hardware issues.
• Strong analytical and problem-solving skills, plus good communication and teamwork.

Aufgaben

• Configure LED driver ICs to achieve target display performance (brightness, grayscale, color accuracy).
• Optimize driver parameters: current settings, PWM timing, scan configuration, gamma, grayscale.
• Evaluate image quality metrics: mura, flicker, cross-talk, low grayscale, refresh rate.
• Support LED panel calibration, white balance, gamma correction, color uniformity.
• Perform laboratory measurements with oscilloscopes, multimeters, colorimeters, spectrometers, imaging systems.
• Analyze electrical characteristics: power consumption, signal integrity, voltage, current, thermal behavior.
• Collaborate with hardware, FPGA, firmware, and manufacturing teams to debug display issues.
• Validate new LED driver ICs and recommend configurations for different LED technologies.
• Prepare technical documentation, configuration guidelines, and validation reports.
• Support supplier interactions and troubleshooting during development and manufacturing.

Kenntnisse

Electrical fundamentals

LED display architecture

LED driver ICs

PWM & grayscale control

Display calibration concepts

Laboratory instruments

Scripting knowledge

Fine-pitch LED displays

Image quality optimization

Vendor collaboration

Waveform analysis

Analytical skills

Communication & teamwork

Ausbildung

Bachelor's degree in Electronics Engineering

Jobbeschreibung

Select how often (in days) to receive an alert:

Electronics Hardware Design Engineer

Location

Noida, UP, IN

About Barco

As an international company with European roots (HQ in Kortrijk, Belgium), Barco has a culture of collaboration across borders and nationalities. Because we believe diversity leads to more great ideas and drives innovation. Thanks to our over 3,000 visioneers, we develop unique visualization & collaboration technology that helps professionals accelerate innovation in the healthcare, enterprise and entertainment markets.

About the CR Division

CR Division is regarded the leading expert in control room solutions for broadcasting, telecommunications, public utilities, process control, traffic control, surveillance and command & control applications.

Barco’s expertise in projection technology, its leadership in the field of Electronics Design, Mechanical design, wall management software, display wall control systems and extensive project, system and user experience, allows Barco Control Rooms to act as one single partner for each control room project.

Barco CR Division has technological ownership of design, its solutions are optimized for 24/7 mission critical applications and feature guaranteed servicing and availability of components and support over product lifetime. Its continuous high-quality R&D effort and proven flexibility towards customers’ needs offers the best guarantee for future-proof control room investments.

About the R&D Team

Our R&D team is a multidisciplinary engineering group comprising Electronics, Mechanical, and Optics engineers focused on the development of advanced LED Tile Display solutions.

The team is responsible for the complete product development lifecycle, including:

• Electronics Design: Power architecture, LED driving circuits, signal processing, control systems, FPGA/embedded solutions, EMC/ESD compliance, and reliability engineering.
• Mechanical Design: Tile structure development, thermal management, manufacturability, installation mechanisms, environmental protection, and durability optimization.
• Optical Engineering: Brightness and uniformity optimization, viewing angle performance, color calibration, contrast enhancement, light extraction efficiency, and visual quality assessment.
• System Integration: Seamless integration of electronic, mechanical, and optical subsystems to deliver high-performance LED display products.
• Innovation & Validation: Researching new technologies, prototyping, testing, regulatory compliance, and continuous improvement of product performance, reliability, and cost.

The team collaborates closely to transform innovative concepts into robust, scalable, and high-quality LED display solutions for commercial, industrial, and specialized display applications.

About the Role

We are seeking a skilled Electronics Hardware Designer to join our R&D Team

Key Responsibilities

• Configure LED driver ICs to achieve target display performance, including brightness, grayscale, color accuracy, and uniformity.
• Optimize driver parameters such as current settings, PWM timing, scan configuration, gamma, and grayscale performance.
• Evaluate image quality metrics including mura, flicker, ghosting, cross-talk, low grayscale performance, and refresh rate.
• Support LED panel calibration, white balance, gamma correction, and color uniformity optimization.
• Perform laboratory measurements using oscilloscopes, multimeters, colorimeters, spectrometers, and imaging systems.
• Analyze electrical characteristics including power consumption, signal integrity, voltage, current, and thermal behavior.
• Work closely with hardware, FPGA, firmware, and manufacturing teams to debug display issues.
• Validate new LED driver ICs and recommend optimal configurations for different LED technologies (SMD, COB, Flip-chip, etc.).
• Prepare technical documentation, configuration guidelines, and validation reports.
• Support supplier interactions and troubleshooting during product development and manufacturing.

Preferred Skills and Experience

• Master or Bachelor degree in Electronics Engineering or equal by experience
• Strong understanding of electrical engineering fundamentals.
• Good knowledge of LED display architecture and LED driver ICs.
• Understanding of PWM, multiplexing, grayscale control, and constant-current drivers.
• Knowledge of display calibration concepts including gamma, color temperature, white point, and luminance.
• Experience with laboratory instruments such as oscilloscopes and power supplies.
• Basic scripting or programming knowledge (Python, C/C++, or MATLAB) is desirable.
• Experience with fine-pitch LED displays. li>Knowledge of image quality optimization and calibration techniques.
• Experience working with LED driver vendors and display manufacturers.
• Ability to analyze electrical waveforms and troubleshoot hardware issues.
• Strong analytical and problem-solving skills.
• Good communication and teamwork abilities.

Barco is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances.

We are committed to conducting our business activities with the highest standards of integrity, responsibility and compliance across all aspects of our operations. This includes adherence to applicable laws, regulations and internal policies related to ethical conduct, quality standards, cyber security, sustainability, data protection & confidentiality and safety.

D&I Statement

At Barco, innovation drives everything we do. We believe that diversity fuels creativity, bringing us closer to our colleagues and customers. Inclusion and equity aren't just values—they're core capabilities that propel us toward our shared goals and mission.

Think of images, and you think of Barco. We’re a global tech company creating AV solutions that help professionals succeed when it matters most. Our mission? To visualize and connect the world – from better patient outcomes in healthcare to smarter decision-making and collaboration in enterprise and unforgettable experiences in entertainment.

At Barco, your ideas matter. You’ll learn, grow, and make an impact in a workplace that values your perspective and supports a healthy work-life balance.

And the best part? You’ll team up with 3,500+ visioneers who thrive on curiosity, fuel creativity, and push boundaries together.

Innovation starts with you! Ready to make it happen?