DMT Member Mech utility 3 Professional

Aditya Birla Insulators

Vadodara

On-site

INR 600,000 - 900,000

Full time

4 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Aditya Birla Insulators is seeking a capable maintenance/ops professional to drive area-wide improvement initiatives and ensure statutory and HSE norms are met. The role emphasizes Kaizen, 5S, and continuous improvement across DMTs and asset care.

You will coordinate daily work management, plan maintenance in SAP, analyze root causes, and push for equipment reliability and zero production losses, while aligning with area targets and safety standards.

Responsibilities

  • Drive strategic / area wise improvement initiatives under the guidance of AET/PBU Head and ensure all statutory requirements in the Area are met with focus on air and water pollution control, for hazardous wastes and effluents.
  • Follow procedures plans, for compliance with statutory, regulatory environmental norms and HIL standards for Occupational Health, safety environment.
  • Eradicate the health hazards that arise out of occupational, design human risk factors and implement programs to comply with statutory requirements hazard mitigation.
  • Align with Kaizen and other improvement initiatives for greater sustainability of operations.
  • Maintain workplace in order with respect to all Sub-areas (Level of 5-S).
  • Follow safety standards procedures (work permit system, storage and handling of hazardous material, etc. ) for accident prevention in the Area.
  • Follow LOTOTO (Look-Out, Tag-Out Try-Out) guidelines for personnel safety.
  • Comply with flawless daily work by undertaking following:
  • Execution of DMTs excellence standards across the Area
  • Achievement of monthly, quarterly and annual PB targets of the assigned Area in terms of quantity quality
  • Abide Daily Performance Indicators (DPIs) within the team.
  • Follow and adhere to the clearly defined KPIV KPOV (Key Performance Input / Output Variables) to DMTs with all the related production.
  • Undertake Abnormality Correction in DMTs through Root Cause Analysis and address unfavorable deviations through countermeasures (Kaizen, SPL, Visual Controls, Mistake proofing, Change in SWI, etc. )
  • Align work priorities, execute plans on day-to-day basis pertaining to SQCDPM, and review Root Cause Analysis of any unfavorable deviations in last 24 hours.
  • Undertake daily periodic Job Planning through ERP system (SAP) for efficient daily workflow.
  • Align with Model areas / machines devoid of unwanted items and make abnormality Identification (8 types) redressal as a continuous process in all DMTs (5S Kaizen).
  • Execution of daily Operations, Production Maintece and take related decisions within the allocated budget.
  • Ensure continuous improvements using problem solving tools (RCA, OPL, Kaizen etc. )
  • Drive FI, PI, Just Do It, Value Creation, and other improvement initiatives to improve productivity cost efficiency of the Area.
  • Create value through waste elimination, optimum resource utilization, productivity enhancement, etc.
  • Eliminate inefficiencies and NVAs in the system for streamlining.
  • Undertake and eliminate the Root Cause of breakdowns, to minimize process disturbance and production delays.
  • Ensure equipment availability health in the area by following measures: plan implement preventive maintece, execute reliability testing predictive maintece, execution of shutdown overhaul, and ensure timely breakdown maintece with functional support from CoE Asset Care, if required.
  • Achieve zero production loss due to equipment related breakdowns by following measures:
  • Ensure availability of critical spares
  • Use ERP System (SAP) and ensure complete adherence with maintece schedule.
  • Conduct Equipment Criticality Analysis to identify gaps anticipate issues proactively and recommend solutions.
  • Execute the implementation of best maintece practices across the PBU and monitor its effectiveness in coordination with AET and CoE-Asset care, to attain higher uptime of Plant and equipment.
  • Control overall cost of maintece by following measures: track spare consumption by conducting regular reviews, control spare inventory at optimum levels, explore possibility of using import substitutes and undertake innovative cost optimization projects.
  • Ensure effective utilization control of manpower, overtime, and store expenses through recycling spares and waste reduction.
  • Use ERP to maintain monitor following and assist daily asset care:
  • Calibration / overhauling breakdown / corrective maintece, data related to Critical Process Instruments
  • Execution of Work Order Cycle to different agencies / departments by daily logbook keeping, recording maintece record, etc.
  • Structured data / check sheet for equipment details, job plan, safety plan, etc.
  • Data related to maintece history, jobs undertaken, and details of spares consumables utilized.
  • Observe and execute in the area of opportunity and conceptualize execute projects for OEE improvement, technology upgradation, low-cost automation, maintece cost optimization, digitalization (FI / PI / JDI), etc. to create maximum value for the PBU.
  • Monitor the progress on condition appraisal for all equipment, sub equipment and assemblies and ensure that condition appraisal refurbishing of equipment is happening as per the plan.
  • Undertake continuous recording of special events, trip analysis, failure analysis, efficiency improvement, benchmarking, efficiency evaluation, etc. for scope of improvement.
  • 100 % availability of all AET-2 equipment (pumps, compressors, lines, blowers, RO, STP, WTP, ETP)
  • Drive the culture of structured problem solving by ensuring implementation of FI, Just Do It, and any other project which is derived from chronic issues.
  • Meet and exceed internal external customer expectations, adhere with service level agreements (SLAs), and implement action plans based on ICSI, customer feedback surveys.

Job description

Job Purpose
Key Result Areas
  • Drive strategic / area wise improvement initiatives under the guidance of AET/PBU Head and ensure all statutory requirements in the Area are met with focus on air and water pollution control, for hazardous wastes and effluents.
  • Follow procedures plans, for compliance with statutory, regulatory environmental norms and HIL standards for Occupational Health, safety environment.
  • Eradicate the health hazards that arise out of occupational, design human risk factors and implement programs to comply with statutory requirements hazard mitigation.
  • Align with Kaizen and other improvement initiatives for greater sustainability of operations.
  • Maintain workplace in order with respect to all Sub-areas (Level of 5-S).
  • Follow safety standards procedures (work permit system, storage and handling of hazardous material, etc. ) for accident prevention in the Area.
  • Follow LOTOTO (Look-Out, Tag-Out Try-Out) guidelines for personnel safety.
Safety Workplace Management
  • Comply with flawless daily work by undertaking following:
Daily Work Management
  • Execution of DMTs excellence standards across the Area
  • Achievement of monthly, quarterly and annual PB targets of the assigned Area in terms of quantity quality
  • Abide Daily Performance Indicators (DPIs) within the team.
  • Follow and adhere to the clearly defined KPIV KPOV (Key Performance Input / Output Variables) to DMTs with all the related production.
  • Undertake Abnormality Correction in DMTs through Root Cause Analysis and address unfavorable deviations through countermeasures (Kaizen, SPL, Visual Controls, Mistake proofing, Change in SWI, etc. )
  • Align work priorities, execute plans on day-to-day basis pertaining to SQCDPM, and review Root Cause Analysis of any unfavorable deviations in last 24 hours.
  • Undertake daily periodic Job Planning through ERP system (SAP) for efficient daily workflow.
  • Align with Model areas / machines devoid of unwanted items and make abnormality Identification (8 types) redressal as a continuous process in all DMTs (5S Kaizen).
  • Execution of daily Operations, Production Maintece and take related decisions within the allocated budget.
Continuous Improvement
  • Ensure continuous improvements using problem solving tools (RCA, OPL, Kaizen etc. )
  • Drive FI, PI, Just Do It, Value Creation, and other improvement initiatives to improve productivity cost efficiency of the Area.
  • Create value through waste elimination, optimum resource utilization, productivity enhancement, etc.
  • Eliminate inefficiencies and NVAs in the system for streamlining.
Asset Care Equipment Reliability
  • Undertake and eliminate the Root Cause of breakdowns, to minimize process disturbance and production delays.
  • Ensure equipment availability health in the area by following measures: plan implement preventive maintece, execute reliability testing predictive maintece, execution of shutdown overhaul, and ensure timely breakdown maintece with functional support from CoE Asset Care, if required.
  • Achieve zero production loss due to equipment related breakdowns by following measures:
  • Ensure availability of critical spares
  • Use ERP System (SAP) and ensure complete adherence with maintece schedule.
  • Conduct Equipment Criticality Analysis to identify gaps anticipate issues proactively and recommend solutions.
  • Execute the implementation of best maintece practices across the PBU and monitor its effectiveness in coordination with AET and CoE-Asset care, to attain higher uptime of Plant and equipment.
  • Control overall cost of maintece by following measures: track spare consumption by conducting regular reviews, control spare inventory at optimum levels, explore possibility of using import substitutes and undertake innovative cost optimization projects.
  • Ensure effective utilization control of manpower, overtime, and store expenses through recycling spares and waste reduction.
  • Use ERP to maintain monitor following and assist daily asset care:
  • Calibration / overhauling breakdown / corrective maintece, data related to Critical Process Instruments
  • Execution of Work Order Cycle to different agencies / departments by daily logbook keeping, recording maintece record, etc.
  • Structured data / check sheet for equipment details, job plan, safety plan, etc.
  • Data related to maintece history, jobs undertaken, and details of spares consumables utilized.
  • Observe and execute in the area of opportunity and conceptualize execute projects for OEE improvement, technology upgradation, low-cost automation, maintece cost optimization, digitalization (FI / PI / JDI), etc. to create maximum value for the PBU.
  • Monitor the progress on condition appraisal for all equipment, sub equipment and assemblies and ensure that condition appraisal refurbishing of equipment is happening as per the plan.
  • Undertake continuous recording of special events, trip analysis, failure analysis, efficiency improvement, benchmarking, efficiency evaluation, etc. for scope of improvement.
Process Care Quality
  • 100 % availability of all AET-2 equipment (pumps, compressors, lines, blowers, RO, STP, WTP, ETP)
  • Drive the culture of structured problem solving by ensuring implementation of FI, Just Do It, and any other project which is derived from chronic issues.
Customer Centricity

Meet and exceed internal external customer expectations, adhere with service level agreements (SLAs), and implement action plans based on ICSI, customer feedback surveys.

Disclaimer: This job posting has been aggregated from external source. Role details, content, and availability are subject to change. Applicants are advised to confirm the latest information directly on the company website before applying.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

DMT Member E&I Utility
DMT Member E&I Utility

Aditya Birla Group • Vadodara

On-site
INR 500,000 - 750,000
DMT Member Mech utility 3
DMT Member Mech utility 3

Aditya Birla Group • Vadodara

On-site
INR 600,000 - 900,000
TSO Mech (LSC & RMH)
TSO Mech (LSC & RMH)

UltraTech Cement Ltd. • Rajasthan

On-site
INR 600,000 - 900,000
Maintenance Engineer
Maintenance Engineer

Tata Advanced Systems Limited • Nagpur District

On-site
INR 600,000 - 900,000
Maintenance Engineer
Maintenance Engineer

Tata Advanced Systems Limited • Nagpur City

On-site
INR 800,000 - 1,200,000
TSO Mech (LSC & RMH)
TSO Mech (LSC & RMH)

Aditya Birla • Rajasthan

On-site
INR 500,000 - 750,000
Engineer Maintenance Mechanical - DTA PP , JMD. ( 83088243 )
Engineer Maintenance Mechanical - DTA PP , JMD. ( 83088243 )

Reliance Industries Ltd • Jamnagar

On-site
INR 550,000 - 850,000
Manager - Engineering Maintenance, Dahanu, ACG Capsules
Manager - Engineering Maintenance, Dahanu, ACG Capsules

ACG • Mumbai

On-site
INR 900,000 - 1,200,000
EXECUTIVE N - EHS - Vizag
EXECUTIVE N - EHS - Vizag

Asian Paints Limited • Visakhapatnam

On-site
INR 420,000 - 620,000
Senior Manager Asset Care
Senior Manager Asset Care

United Breweries Ltd. • Hyderabad

On-site
INR 900,000 - 1,500,000