Automotive High-Speed Hardware Design Engineer

Bosch Global Software Technologies; Bengaluru; On-site; INR 2,500,000 - 4,500,000; Full time

Job summary

Bosch Global Software Technologies seeks an experienced hardware design engineer for ADAS, Cockpit, and connectivity ECUs. You will drive concept-to-production hardware, select components, and ensure robust performance in automotive environments.

You will design high-speed PCBs with DDR4/5, PCIe, Ethernet, USB, MIPI, and SerDes, while performing SI/PI analysis and BOM optimization. Collaboration with cross-functional teams and safety reviews are required.

Qualifications

• Bachelor’s or Master’s in Electronics, Electrical, or related field.
• 5–9 years of hands-on automotive hardware design experience.
• Experience with SoC-based board design and automotive interfaces.

Responsibilities

• Lead hardware design for ADAS, Cockpit, and connectivity ECUs from concept to production.
• Design high-speed boards with DDR4/DDR5, PCIe, Ethernet, USB, MIPI, and SerDes.
• Perform schematic design, BOM optimization, and validation testing.
• Conduct SI/PI analysis and ensure automotive-grade reliability.
• Support thermal design, DFMEA/DFx, and safety reviews per ISO 26262.
• Collaborate with system, software, and manufacturing teams through PPAP.
• Create technical design reviews and customer discussions.

Skills

ADAS knowledge

High-speed design

Signal integrity

Documentation

Education

Bachelor’s or Master’s in Electronics/Electrical Engineering

Tools

Zuken

Altium Designer

Cadence Allegro

Mentor DxDesigner

Zuken CR8000

Job description

Lead hardware design and development for ADAS, Cockpit, and Connectivity ECUs, from concept to production

Design high-speed digital boards with advanced SoCs, DDR4/DDR5, LPDDR interfaces, PCIe, Ethernet (RGMII/SGMII/RMII/10G), USB, MIPI CSI/DSI, and SerDes.

Perform schematic design, component selection, and BOM optimization ensuring automotive-grade reliability and cost efficiency.

Conduct Signal Integrity (SI) and Power Integrity (PI) analysis for critical high-speed signals and power rails.

Support thermal design and validation, collaborating with mechanical and thermal engineers to ensure performance under harsh automotive conditions.

Ensure ASIL-D compliance (ISO 26262) for safety-critical designs; participate in FMEA, FMEDA, and safety architecture reviews.

Interface with camera, radar, LiDAR, and sensor fusion modules, ensuring signal quality, timing, and synchronization.

Collaborate with PCB layout engineers for constraint-driven designs (impedance, stackup, crosstalk, EMI/EMC).

Drive hardware validation and bring-up, including board-level testing, debugging, and root-cause analysis.

Work with cross-functional teams (System, Software, Validation, Manufacturing, EMC) through design verification and PPAP stages.

Support DFMEA, DFx (DFM, DFT, DFA) activities to ensure manufacturability and reliability.

Create design documentation, validation reports, and participate in technical reviews and customer discussions.

Required Skills and Experience:

Bachelor’s or Master’s Degree in Electronics, Electrical, or related engineering field.

5–9 years of hands-on experience in automotive hardware design.

Proven experience with SoC-based board design (e.g., NVIDIA, Qualcomm, Renesas, TI, NXP, Infineon AURIX).

Strong understanding of ADAS, Cockpit, and IVI architecture including sensor and compute domains.

Expertise in high-speed design (DDR4/5, PCIe, MIPI, Ethernet, USB 3.x, LVDS, SerDes).

Experience with SI/PI analysis tools (e.g., HyperLynx, Sigrity, Ansys, Cadence).

Knowledge of Automotive Safety (ISO 26262 – ASIL B to D compliance).

Familiarity with EMI/EMC standards (CISPR 25, ISO 11452) and compliance testing.

Understanding of thermal design, power sequencing, and power distribution.

Experience in camera/radar interface and sensor fusion hardware design.

Proficiency in schematic tools (Altium, Cadence Allegro, Mentor DxDesigner, Zuken CR8000).

Hands-on experience with hardware bring-up, debugging, and lab instruments (oscilloscope, logic analyzer, power analyzer, etc.).

Excellent analytical, communication, and documentation skills.

Preferred Qualifications:

Experience with ASIL-D compliant ECU development.

Exposure to Ethernet TSN, CAN-FD, LIN, FlexRay and in-vehicle communication networks.

Knowledge of thermal simulation and mechanical integration.

Familiarity with AI/ML accelerator SoCs used in perception and fusion ECUs.

Experience working with global OEMs and Tier-1s on production projects.

Key Tools & Technologies:

Schematic/PCB: Zuken , Altium Designer, Cadence Allegro, Mentor Graphics