CNC Programmer - 2082 & 2083
Thorlabs
Get more replies from employers
Send a job-specific resume in minutes.
Benefits offered by this job
Job summary
Thorlabs in Ely seeks a skilled CNC Programmer to support R&D and Manufacturing with programming and machining of precision components. You will work on 3-axis and 5-axis milling, with potential for turning and Wire EDM, and engage in continuous improvement across departments.
You’ll use Vericut for virtual validation and metrology tools to verify tolerances, while maintaining safety, quality and collaboration across teams. Onsite parking and benefits apply.
Qualifications
- Apprenticeship trained or similar experience considered
- Minimum 5 years’ experience in a Machine Shop environment
- Experience with 3-axis and 5-axis milling with minimising downtime (SMED, zero-point workholding)
- Experience with Sliding Head Lathes highly desirable
- Experience with Wire Erosion desirable but not essential
- Experience working with micron-level precision for setup and machining
- Understanding of engineering drawings and machining methods
- Experience with Fanuc / Haas control systems
- Use of metrology techniques and measuring parts against drawings
- Working knowledge of CAD/ CAM software (Solidworks, MasterCAM, Vericut)
- Microsoft Office application skills
Responsibilities
- To program, set-up and run 3-axis and 5-axis milling centres to produce precision components in a high mix, low volume environment
- Set-up and run turning and Wire EDM CNC machines with appropriate training
- Extensive use of Vericut simulation software to digitally prove-out components prior to first-off machining
- Collaborate with the R&D and Manufacturing departments to support all machining activities and improve manufacturability
- Ensure component quality meets drawing requirements using metrology tools to validate tolerances and finishes
- Program to maximise machine efficiency and uptime
- Ensure proper work holding and machining techniques when handing over to production
- Carry out preventative maintenance routines with machine operators
- Adhere to company safety and environmental requirements
- Participate in Continuous Improvement/Lean initiatives to improve efficiency, quality and output
- Maintain a culture of 5S within the Machine Shop
- Share knowledge and best practices with other departments
Skills
Education
Tools
Job description
We are looking for a CNC Programmer to support the R&D and Manufacturing departments with programming and machining of new components. Take an active role in process improvements and promote collaboration and knowledge sharing between departments and team members.
Monday to Friday 8am – 4:30 pm
Thorlabs is a global, industry leading optical technologies company. We are experts in the design and manufacture or a range of innovative photonics products. We use these products in manufacturing and research, from fibre optics to piezo motors. We are the gold standard with optics laboratories worldwide. There are now 22 facilities across the world in 9 countries. Here in Ely, we are responsible for the Motion Control and Optical Tables product line.
Ourpurpose-built facility isjust 12 miles from Cambridge, within the beautiful mediaeval city of Ely. There are train and bus links to Ely from Kings Cross and Liverpool Street London, and our site is within distance of Ely train station and Ely Bus station.
- To program, set-up and run 3-axis and 5-axis milling centres to produce precision components from a variety of materials in a high mix, low volume environment
- With appropriate training if required, set-up and run turning and Wire EDM CNC machines
- Extensive use of Vericut simulation software to digitally prove-out components prior to first-off machining (training will be provided if required)
- To collaborate closely with the R&D and Manufacturing departments to support all machining related activities, giving appropriate feedback to improve component manufacturability
- Ensure the quality of components produced meet the manufacturing drawing requirements by using appropriate metrology tools to validate tolerances and finishes
- Program to ensure machines are running to their maximum potential/efficiency
- To ensure appropriate work holding and machining techniques and procedures are followed when the component is handed over to production operators
- In collaboration with machine operators, carry out preventative maintenance routines
- Ensure that all machining activities are carried out in accordance with the company’s safe working and environmental requirements
- Participate in Continuous Improvement/Lean initiatives within the Machine Shop to improve efficiency, quality and volume of output
- Maintain a culture of 5S within the Machine Shop
- Collaborate with other departments and share knowledge and best practices amongst the team
- Apprenticeship trained or similar experience considered
- Minimum 5 years’ experience in a Machine Shop environment
- Experienced in 3-axis and 5-axis milling with consideration for minimising downtime (SMED methodologies utilising zero-point work holding)
- Experience with Sliding Head Lathes highly desirable
- Experience with Wire Erosion desirable but not essential
- Experience working with micron-level precision for setup and machining
- Experienced in understanding engineering drawings and implementing appropriate machining methods
- Experience with Fanuc / Haas control systems
- Use of metrology techniques and measuring parts against drawings
- A working knowledge of CAD/ CAM software (preferably Solidworks, MasterCAM and Vericut)
- Microsoft Office application skills
At Thorlabs there are lots of opportunities for inhouse customised training and development that accelerates your career progression. We have free onsite parking, free refreshments, as well as an entertainment area in our large canteen for your enjoyment.
Competitive Salary to attract the best, plus an excellent benefits package including pension, health care, 25 days holiday plus public holidays.
THOR-VC-2082 & 2083
We welcome applications from persons who are over 18 years old.
- Contributed Pension Scheme
- Group Life Cover
- Private Health Care
- Group Income Protection & more.
We are Disability Confident Committed
In line with the requirements of the Immigration, Asylum and Nationality Act 2006, all applicants must have a valid permission to enter or remain in the UK with no condition that prevents them from working in the UK. Documented evidence of such permission will be required from candidates as part of the recruitment process.
This is a legal requirement, further information is here School leaving age - GOV.UK (www.gov.uk)
'/%3e%3cpath%20d='M101.744%2012.4726L102.894%2016.1947L99.0021%2013.2201L101.744%2012.4726ZM105.3%208.40937H100.488L99.0026%203.59473L97.5116%208.41047L92.7%208.40385L96.5965%2011.3834L95.1055%2016.1942L99.0021%2013.2196L101.408%2011.3834L105.3%208.40992V8.40937Z'%20fill='white'/%3e%3cdefs%3e%3clinearGradient%20id='paint0_linear_5593_1381'%20x1='90'%20y1='9.44471'%20x2='99'%20y2='9.44471'%20gradientUnits='userSpaceOnUse'%3e%3cstop%20stop-color='%2300AD70'/%3e%3cstop%20offset='0.998594'%20stop-color='%2300B67A'/%3e%3cstop%20offset='1'%20stop-color='%23DCDCE6'/%3e%3c/linearGradient%3e%3c/defs%3e%3c/svg%3e){kind=small}
