CNC Programmer - 2082 & 2083

Vytran LLC; Ely; On-site; GBP 40,000 - 60,000; Full time

Benefits offered by this job

Free onsite parking

Free refreshments

Entertainment area in canteen

Pension and health care

Job summary

Thorlabs in Ely is recruiting a CNC Programmer to support R&D and Manufacturing with programming and machining of new components. You will program, set up and run 3-axis and 5-axis milling centres, while collaborating with R&D to improve component manufacturability and efficiency.

The role requires precision in a high-mix, low-volume environment and experience with Fanuc/Haas controls. Training in Vericut is provided and knowledge of CAD/CAM tools (SolidWorks, Mastercam) is preferred.

Qualifications

• Apprenticeship trained or similar experience considered.
• Minimum 5 years’ experience in a Machine Shop environment.
• Experienced in 3-axis and 5-axis milling with minimised downtime (SMED, zero-point work holding).
• Experience with Sliding Head Lathes desirable.
• Experience with Wire Erosion desirable but not essential.
• Experience with micron-level precision for setup and machining.
• Understanding engineering drawings and implementing machining methods.

Responsibilities

• Program, set-up and run 3-axis and 5-axis milling centres to produce precision components from various materials.
• Set-up and run turning and Wire EDM CNC machines with appropriate training if required.
• Use Vericut to digitally prove-out components prior to first-off machining.
• Collaborate with R&D and Manufacturing to improve manufacturability and efficiency.
• Ensure parts meet drawing tolerances using metrology tools.
• Maintain machine performance and optimize tooling and work-holding processes.
• Follow safe working and environmental requirements and participate in Lean initiatives.

Skills

3-axis milling

5-axis milling

CNC programming

Reading drawings

Fanuc / Haas control

Vericut

Tools

SolidWorks

Mastercam

Vericut

Job description

What is the job?

We are looking for a CNC Programmer to support the R&D and Manufacturing departments with programming and machining of new components. Take an active role in process improvements and promote collaboration and knowledge sharing between departments and team members.

Working Hours:

Monday to Friday 8am – 4:30 pm

Who we are?

Thorlabs is a global, industry leading optical technologies company. We are experts in the design and manufacture or a range of innovative photonics products. We use these products in manufacturing and research, from fibre optics to piezo motors. We are the gold standard with optics laboratories worldwide. There are now 22 facilities across the world in 9 countries. Here in Ely, we are responsible for the Motion Control and Optical Tables product line.

Where you will be working?

Ourpurpose-built facility isjust 12 miles from Cambridge, within the beautiful mediaeval city of Ely. There are train and bus links to Ely from Kings Cross and Liverpool Street London, and our site is within distance of Ely train station and Ely Bus station.

What we would like you to do/to see…

• To program, set-up and run 3-axis and 5-axis milling centres to produce precision components from a variety of materials in a high mix, low volume environment
• With appropriate training if required, set-up and run turning and Wire EDM CNC machines
• Extensive use of Vericut simulation software to digitally prove-out components prior to first-off machining (training will be provided if required)
• To collaborate closely with the R&D and Manufacturing departments to support all machining related activities, giving appropriate feedback to improve component manufacturability
• Ensure the quality of components produced meet the manufacturing drawing requirements by using appropriate metrology tools to validate tolerances and finishes
• Program to ensure machines are running to their maximum potential/efficiency
• To ensure appropriate work holding and machining techniques and procedures are followed when the component is handed over to production operators
• In collaboration with machine operators, carry out preventative maintenance routines
• Ensure that all machining activities are carried out in accordance with the company’s safe working and environmental requirements
• Participate in Continuous Improvement/Lean initiatives within the Machine Shop to improve efficiency, quality and volume of output
• Maintain a culture of 5S within the Machine Shop
• Collaborate with other departments and share knowledge and best practices amongst the team

What is essential to us…

• Apprenticeship trained or similar experience considered
• Minimum 5 years’ experience in a Machine Shop environment
• Experienced in 3-axis and 5-axis milling with consideration for minimising downtime (SMED methodologies utilising zero-point work holding)
• Experience with Sliding Head Lathes highly desirable
• Experience with Wire Erosion desirable but not essential
• Experience working with micron-level precision for setup and machining
• Experienced in understanding engineering drawings and implementing appropriate machining methods
• Experience with Fanuc / Haas control systems
• Use of metrology techniques and measuring parts against drawings
• A working knowledge of CAD/ CAM software (preferably Solidworks, MasterCAM and Vericut)
• Microsoft Office application skills

What will you get?

At Thorlabs there are lots of opportunities for inhouse customised training and development that accelerates your career progression. We have free onsite parking, free refreshments, as well as an entertainment area in our large canteen for your enjoyment.

And the benefits are?

Competitive Salary to attract the best, plus an excellent benefits package including pension, health care, 25 days holiday plus public holidays.

Job Reference: THOR-VC-2082 & 2083

This is a rolling campaign, so we will actively interview applicants. We reserve the right to close this vacancy early if we receive sufficient applications for the role.

We welcome applications from persons who are over 18 years old.

*This is a legal requirement, further information is here School leaving age - GOV.UK (www.gov.uk)

We would encourage all internal applicants to inform their line managers of their interest in this position.

• Contributed Pension Scheme
• Group Life Cover
• Private Health Care
• Group Income Protection & more

We are Disability Confident Committed

In line with the requirements of the Immigration, Asylum and Nationality Act 2006, all applicants must have a valid permission to enter or remain in the UK with no condition that prevents them from working in the UK. Documented evidence of such permission will be required from candidates as part of the recruitment process.