Embedded & Firmware Engineer (human)

NEURA Robotics

Riederich

On-site

EUR 70,000 - 95,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

NEURA Robotics is seeking an embedded firmware engineer to design and implement software running on ARM Cortex-M/A cores for safety-critical real-time workloads across distributed MCUs and SoCs. You will work across the embedded stack from bare-metal drivers to RTOS applications, and contribute to OTA, boot sequences, and testing within a collaborative HW/SW environment.

You will implement BSPs and drivers, integrate sensors and actuators, and help ensure deterministic, low-latency performance

Qualifications

  • Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Embedded Systems, or related field.
  • 3+ years embedded firmware development in real-time, resource-constrained environments.

Responsibilities

  • BSP & driver development: develop/port/maintain board support packages and low-level peripheral drivers for ARM Cortex-M/A targets.
  • RTOS application layer: design and implement FreeRTOS tasks, IPC, and timing for safety-critical apps.
  • Sensor & actuator integration: integrate IMUs, encoders, ToF, torque sensors, and motor controllers.
  • Communication middleware: CAN-FD, micro-ROS/DDS-XRCE, EtherCAT slave stacks for low-latency exchange.
  • Safety & monitoring: hardware/software safety, watchdogs, safe-state handling, and FMEA contributions.
  • OTA & configuration management: firmware updates, boot sequence, non-volatile storage, PLM alignment.
  • Testing and CI: unit/integration tests, HIL setups, CI/CD integration, code reviews, and documentation.

Skills

C/C++
Embedded firmware
RTOS
ThreadX
CAN-FD
EtherCAT
SPI
I2C
UART
ROS 2
Unit testing
Git

Education

Bachelor's or Master's in Electrical/Embedded Systems

Tools

Unity
Ceedling
GoogleTest
Git
Oscilloscopes
Logic analyzers

Job description

Your mission & challenges

You write the firmware that makes cognitive robots tick — at 1 kHz and beyond.

NEURA's robots run dense, safety-relevant, real-time workloads across a distributed network of microcontrollers and SoCs. Your firmware keeps the system deterministic, observable, and ready for the AI stack above it. You'll work across the embedded stack — from bare-metal drivers and BSP (Board support package) bring-up to RTOS application layers, communication middleware, and OTA infrastructure — collaborating closely with electronics, systems, and AI/software engineers.

  • BSP & driver development: Develop, port, and maintain board support packages and low-level peripheral drivers (GPIO, SPI, I²C, UART, CAN-FD, EtherCAT, USB) for ARM Cortex-M and Cortex-A targets; support hardware bring-up from first power-on.
  • RTOS application layer: Architect and implement FreeRTOS (or equivalent) task structures, inter-task communication, priority management, and resource allocation for safety-critical real-time applications.
  • Sensor & actuator integration: Integrate IMUs, encoders, tactile sensors, ToF sensors, force/torque sensors, and BLDC motor controllers into the firmware stack; implement filtering, calibration routines, and data timestamping.
  • Communication middleware: Implement and maintain embedded communication stacks — CAN-FD network management, micro-ROS / DDS-XRCE bridge, EtherCAT slave stack — ensuring reliable, low-latency data exchange with the main robot controller.
  • Safety & monitoring: Implement hardware watchdogs, software safety monitors, safe-state machines, and power-loss handling; contribute to functional safety analysis (FMEA, safety requirements allocation).
  • OTA & configuration management: Design and maintain firmware update mechanisms (OTA, JTAG/SWD flashing), boot sequence management, non-volatile configuration storage, and firmware versioning aligned with the PLM system.
  • Testing and CI: Write unit and integration tests for firmware modules; support HIL (hardware-in-the-loop) test setups; integrate automated firmware testing into CI/CD pipelines.
  • Documentation and code quality: Maintain clear, peer-reviewed code with proper documentation; participate in firmware architecture reviews and contribute to shared coding standards across the embedded team.

What we can look forward to

Deep embedded expertise with a system-level mindset.

You are an embedded engineer who thinks in terms of determinism, latency, and resource constraints — and who is equally comfortable writing a CAN driver as reviewing a schematic with the hardware team. You understand that firmware quality is invisible when it's good and catastrophic when it's not.

  • Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Embedded Systems, or a related field.
  • 3+ years of professional embedded firmware development experience in a real-time, resource-constrained environment (robotics, industrial automation, medtech, automotive, or similar).
  • Expert-level C/C++ for microcontrollers; strong understanding of memory models, volatile/atomic operations, stack management, and linker scripts.
  • Solid hands-on experience with ThreadX or a comparable RTOS — task creation, synchronization primitives, interrupt handling, and timing analysis.
  • Experience with ARM Cortex-M series (M0/M3/M4/M7/M33) and ideally also Cortex-A targets running embedded Linux or Zephyr.
  • Practical experience with key peripheral interfaces: EtherCAT, SPI, I²C, UART, USB CDC/HID, CAN-FD, or similar; ability to debug protocol issues with logic analyzers and oscilloscopes.
  • Familiarity with micro-ROS or ROS 2 integration (fastDDS) is a significant advantage.
  • Experience with firmware CI/CD, unit testing frameworks (Unity, Ceedling, GoogleTest for embedded), and version control (Git).
  • Ability to read hardware schematics and collaborate effectively with electronics and mechanical engineers at the HW/SW boundary.
  • Good English; German is a practical advantage for day-to-day collaboration.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Real-Time Embedded Firmware Engineer for Robotics
Real-Time Embedded Firmware Engineer for Robotics

NEURA Robotics • Germany

Remote
USD 90,000 - 150,000
Embedded & Firmware Engineer (human)
Embedded & Firmware Engineer (human)

NEURA Robotics • Germany

On-site
USD 90,000 - 150,000
Embedded & Firmware Engineer (human)
Embedded & Firmware Engineer (human)

Neura Robotics • Gemeindeverwaltungsverband Metzingen

On-site
EUR 60,000 - 80,000
Dynamic work culture
30 vacation days
Competitive salary package
Software Support L2 Engineer - Robotic Hands (human)
Software Support L2 Engineer - Robotic Hands (human)

NEURA Robotics • Riederich

On-site
EUR 60,000 - 90,000
Software Support L2 Engineer – Robotic Hands (human)
Software Support L2 Engineer – Robotic Hands (human)

Neura Robotics • München

On-site
EUR 65,000 - 90,000
Robotics Hardware Architect — AI Cortex Platform Lead
Robotics Hardware Architect — AI Cortex Platform Lead

NEURA Robotics • Germany

Remote
USD 140,000 - 180,000
Software Support L2 Engineer – Robotic Hands (human)
Software Support L2 Engineer – Robotic Hands (human)

NEURA Robotics • München

On-site
EUR 70,000 - 95,000
Software Support L2 Engineer – Robotic Hands (human)
Software Support L2 Engineer – Robotic Hands (human)

NEURA Robotics • Freising

On-site
EUR 60,000 - 90,000
Senior Embedded Engineer
Senior Embedded Engineer

InLoop Robotics • München

On-site
EUR 70,000 - 110,000
RT & Kernel Engineer (human)
RT & Kernel Engineer (human)

Neura Robotics • Gemeindeverwaltungsverband Metzingen

On-site
EUR 60,000 - 80,000
30 days of vacation
Flexible working hours
Corporate benefits program