Senior ASME Pressure Vessel Fitter

Alps Welding Ltd.

Toronto

On-site

CAD 110,000 - 150,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Alps Welding Ltd. in Toronto is seeking a Senior ASME Pressure Vessel Fitter to layout, fit, and assemble pressure vessels, heat exchangers, and related fabrications in accordance with ASME Section VIII, Div. 1 and approved drawings.

Strong leadership and high-precision layout skills are required for this role. The successful candidate will independently interpret complex drawings, verify tolerances, and mentor junior fitters while maintaining safety, quality, and productivity standards in a

Qualifications

  • 7+ years of fitting experience in an ASME Section VIII pressure-vessel fabrication environment.
  • Advanced blueprint reading skills with complex fabrication drawings, weld maps, and BOMs.

Responsibilities

  • Independently perform complete layout, fitting, and assembly of ASME pressure vessels and related components.
  • Interpret fabrication drawings, weld maps, BOMs, and fabrication packages with minimal supervision.
  • Plan and sequence fitting operations to optimize efficiency and minimize distortion.

Skills

Blueprint interpretation
Leadership
Problem-solving
Precision layout
Independent work
Attention to detail

Tools

Cutting torches
Plasma equipment
Precision measuring instruments
Overhead cranes

Job description

The Senior ASME Pressure Vessel Fitter is responsible for the layout, fitting, and assembly of pressure vessels, heat exchangers, pipe spools, and custom welded fabrications in accordance with ASME Section VIII, Div. 1, approved fabrication drawings, and customer specifications.

This role requires advanced technical fitting skills, strong blueprint interpretation, precision layout, problem-solving abilities, and the ability to independently complete complex vessel assemblies. The successful candidate will demonstrate a high level of workmanship, attention to detail, and leadership while maintaining safety, quality, and productivity standards.

Key Responsibilities:

  • Independently perform complete layout, fitting, and assembly of ASME pressure vessels, tanks, nozzles, supports, internals, and custom fabricated components.
  • Interpret complex fabrication drawings, bills of materials (BOMs), weld maps, and fabrication packages with minimal supervision.
  • Perform advanced layout of shells, heads, saddles, stiffeners, reinforcing pads, and internal structures.
  • Accurately establish vessel centerlines, reference points, elevations, and nozzle orientations.
  • Fit nozzles, flanges, couplings, and connections, ensuring correct location, projection, orientation, and alignment.
  • Prepare, square, align, and assemble components while maintaining specified dimensional tolerances.
  • Perform shell-to-shell, shell-to-head, and other complex fit-ups, ensuring proper joint preparation and alignment.
  • Plan and sequence fitting operations to improve efficiency, maintain accessibility, and minimize distortion and rework.
  • Ensure proper root gaps, bevel angles, lands, and joint configurations in accordance with drawings and applicable Welding Procedure Specifications (WPS).
  • Perform tack welding where authorized and appropriately qualified, in accordance with applicable procedures and requirements.

Tools & Equipment:

  • Operate cutting torches, plasma equipment, grinders, drills, and other fabrication tools.
  • Accurately use precision measuring equipment, including levels, squares, calipers, micrometers, measuring tapes, and pi tapes.
  • Set up and utilize jacks, clamps, strongbacks, fixtures, and alignment tools for complex assemblies.
  • Safely operate overhead cranes, hoists, and rigging equipment in accordance with training and company procedures.
  • Select appropriate tools and fitting methods to maintain quality and improve productivity.
  • Identify and report equipment or tooling issues that may affect safety, quality, or production.

Workmanship & Quality:

  • Maintain high standards of dimensional accuracy, fit-up quality, and overall workmanship.
  • Verify squareness, alignment, nozzle orientation, weld preparation, and dimensional tolerances throughout fabrication.
  • Ensure assemblies meet approved drawings, customer specifications, and applicable ASME fabrication requirements.
  • Understand and follow inspection requirements, including QC hold points and required fit-up inspections.
  • Identify drawing discrepancies, material issues, and fabrication concerns before proceeding with work.
  • Work with Quality Control and Engineering to resolve nonconformances and technical issues.
  • Minimize rework, fitting errors, and material waste through accurate planning and execution.
  • Maintain proper material identification and traceability throughout fabrication.
  • Maintain high standards of housekeeping, 5S, and workstation organization.
  • Work closely with welders, supervisors, engineering, and QC to ensure fabrication requirements are met.
  • Mentor junior fitters and apprentices in layout techniques, fitting practices, and quality standards.
  • Provide guidance and technical support on complex fitting and assembly challenges.
  • Identify opportunities to improve fabrication methods, assembly sequences, and overall shop efficiency.
  • Communicate drawing discrepancies, material shortages, and production concerns promptly.
  • Support continuous improvement initiatives focused on quality, productivity, Lean manufacturing, and 5S.
  • Demonstrate leadership through workmanship, reliability, accountability, and a commitment to quality.
  • Support production schedules while maintaining safety and workmanship standards.

Required Experience & Qualifications:

  • 7+ years of fitting experience in an ASME Section VIII pressure-vessel fabrication environment.
  • Proven ability to independently lay out, fit, and assemble complete pressure vessels and complex fabricated assemblies.
  • Advanced blueprint reading skills, including the ability to interpret detailed fabrication drawings, weld symbols, elevations, and dimensional tolerances.
  • Strong experience with vessel layout, nozzle positioning, shell and head alignment, and complex fit-up procedures.
  • Demonstrated ability to maintain accurate dimensions and produce fit-ups that meet welding and inspection requirements.
  • Solid knowledge of: ASME Section VIII, Div. 1 fabrication requirements; Welding Procedure Specifications (WPS) and weld joint preparation requirements; Pressure vessel construction methods and assembly techniques; Dimensional tolerances, alignment, and distortion control; ASME B31.1/B31.3 piping requirements (an asset)
  • Experience working with carbon steel and stainless steel; experience with exotic alloys is an asset.
  • Strong proficiency with precision measuring instruments and layout equipment.
  • Experience with overhead cranes, rigging, and handling large fabricated assemblies.
  • Ability to troubleshoot complex fitting challenges and work independently with minimal supervision.
  • Previous experience mentoring or leading junior fitters is an asset.

Physical Requirements:

  • Able to lift up to 50 lbs as required.
  • Able to stand for extended periods and work in various positions, including bending, kneeling, and crouching.
  • Comfortable working on large industrial fabrications and in restricted-access areas while following applicable safety procedures.
  • Comfortable working with heavy industrial equipment in a welding and fabrication environment.
  • Able to safely wear and use required personal protective equipment.
  • Advanced fitting and precision layout skills
  • High-level blueprint and weld-symbol literacy
  • Strong dimensional accuracy and attention to detail
  • Ability to independently complete complex vessel assemblies
  • Strong troubleshooting and problem-solving abilities
  • Leadership and mentoring abilities
  • Good communication and teamwork skills
  • Strong organization and time management
  • Ability to prioritize and meet deadlines
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Metal Fabricator
Metal Fabricator

CESSCO Fabrication and Engineering Ltd. • Edmonton

On-site
CAD 63,000 - 68,000
Extended health
Dental
Vision
+2
B Pressure Welder
B Pressure Welder

Startec Compression & Process and Startec Service • Calgary

On-site
CAD 65,000 - 90,000
Competitive wages
Training
Dynamic work environment
B-Pressure Vessel Welder (Night Shift)
B-Pressure Vessel Welder (Night Shift)

Startec • Calgary

On-site
CAD 90,000 - 130,000
Vessel Fitter
Vessel Fitter

Startec Compression & Process and Startec Service • Calgary

On-site
CAD 70,000 - 90,000
Fabricator
Fabricator

Power Recruitment • Toronto

On-site
CAD 50,000 - 70,000
B Pressure Welder
B Pressure Welder

Startec • Calgary

On-site
CAD 80,000 - 105,000
Competitive wages
Training opportunities
Dynamic work environment
Precision FCAW Welder - Pressure Vessels
Precision FCAW Welder - Pressure Vessels

Armstrong Fluid Technology • Toronto

On-site
CAD 55,000 - 75,000
Class B Pressure Welder/Fitter — Growth & Competitive Pay
Class B Pressure Welder/Fitter — Growth & Competitive Pay

AdvanTec Industrial • Calgary

On-site
CAD 61,000 - 69,000
Medical/Dental/Vision
RRSP Matching
Life Insurance
+2
Welder/Fitter
Welder/Fitter

DF Barnes • Dartmouth

On-site
CAD 55,000 - 75,000
Pipefitter
Pipefitter

Academy Group • Town of Onoway

On-site
CAD 70,000 - 85,000