Pay rate: $21
Location: 12465 153rd Street, Edmonton, T5V 1E4
Shift: 7:00am – 3:30pm
What You'll Do
Reporting to the Production Manager, this position is responsible for operating, troubleshooting and preventive maintenance of the Manual Powder Coat system, the Spray-painting process and Material Handling during the loading and unloading of parts.
Essential Functions/Position Requirements
- Adhere to detailed specifications, work instructions, manufacturing information and written or verbal instructions from supervision.
- Run and operate Dynamic Machine Management software (DMM). Use DMM hold codes to report productions issue.
- Run and operate drawing search software (Enovia, Vault etc.) to view and print drawings for fabrication purposes.
- Ensure the chemical concentricity (mix) and pH levels are within recommended range. Perform titration test & trouble shoot chemical concentricity (mix) and pH level variations.
- Ensure the long-term integrity of the Powder Coating System by identifying & replacing wearable components as required. Ensure the cure oven temp vs. line speed provides the proper environment to reach the appropriate dwell times and cure times for the powder.
- Replace Wash System Chemical as required. Maintain the integrity of the pre-treat system and ensure the waste solution does not exceed environmental limitations.
- Maintain Powder in proper containers and storage requirements. Prepare requisition for buyer to procure required powder paint supply. Keep supervisor informed on powder paint and related supply inventory.
- Manually paint all standard, non-standard colors and touch ups to standard colors, mixing and preparing paint according to specifications.
- Prepare material for paint process, identifying appropriate tools and methods to ensure clean smooth surfaces.
- Inspect final product for cosmetics, coverage, cure, adhesion and thickness.
- Load and Unload products from the paint line rails.
- Perform tasks specific to the Wastewater Treatment including monitoring operation, system start-up/shutdown.
- Prioritize jobs per required date and/or based on supervision direction.
- Inform supervisor of potential production or material problems, including delay in shipment.
- Regularly maintain equipment as per Total Productive Maintenance (TPM) sheet including daily maintenance on guns and equipment. (Powder Booths/Pre-Wash/Waste Water Treatment/or General Systems)
- Support EPC Mesh goals by reducing waste, recycle, use material effectively etc. ISO 14001
- Perform other duties as assigned. Employee Relations
- Communicate with administrative, plant and supervisory staff as required.
- Perform overtime as necessary in accordance with both policy and legislative requirements.
- Comply with Eaton's Ethical and Harassment Policies.
- Provide and/or participate in training as required.
- Comply with company rules, regulations and policies as stated in the Employee Handbook.
- Act as team player and participate in department and/or plant committees.
- Occupational Health and Safety) Work in compliance with the Act and regulations [section 28
- Use or wear any equipment, protective devices or clothing required by the employer
- Report to the employer or supervisor any known missing or defective equipment or protective device that may be dangerous
- Report any known workplace hazard to the employer or supervisor
- Report any known contravention of the Act or regulations to the employer or supervisor
- Do not remove or make any ineffective protective device required by the employer or by regulations
- Do not use or operate any equipment or work in a way that may endanger any worker
- Do not engage in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct
- Racing powered hand trucks in a warehouse or seeing who can pick up the most boxes are examples of unsafe and unacceptable workplace conduct.
Operational Excellence
- Report any deficiencies in systems, facilities, machinery, equipment and/or tools immediately to your manager.
- Record and/or report product damage/nonconformities to your manager as required.
- Comply with EQS (Eaton Quality System) policies and procedures.
- Participate and contribute to continuous improvement (Eaton Lean System).
- Comply with ISO 9001 policies and procedures.
- Strive for EBE (Eaton Business Excellence).
- Support the strategic initiatives (strategic wheel/values/philosophies).
- Support the Power of One
Participate in Lean manufacturing at a departmental level through the use of lean tools and philosophies:
- 1. Identify improvements to department workstations and department layouts.
- 2. Identify cost improvements for the facility.
- 3. Identify continuous flow improvement opportunities.
- 5. Improve overall product efficiency and quality.
- 6. Maintain Lean awareness through visual and verbal communication
- 7. Coordinate with Lean Associates in a continuous effort to sustain Lean progress.
Job Requirements
Experience/Education
- Minimum of one-year experience in a manufacturing environment or six months' assembly experience required.
- High School Diploma required.
- Basic knowledge of mechanical, electrical, and safety procedures of a manufacturing facility.
- Ability to read and interpret drawings and schematics is an asset.
- Ability to perform standard work procedures and processes.
- Demonstrated experience of utilizing mechanical tools and measuring equipment required for assembly.
- Good problem solving, mathematical skills and troubleshooting ability.
Aleron companies (Acara Solutions, Aleron Shared Resources, Broadleaf Results, Lume Strategies, TalentRise, Viaduct) are an Equal Opportunity Employer. Race/Color/Gender/Religion/National Origin/Disability/Veteran.
Applicants for this position must be legally authorized to work in the United States. This position does not meet the employment requirements for individuals with F-1 OPT STEM work authorization status.