Intermediate Mechanical Designer

Platinum Trailers

St. Marys

In loco

CAD 78.000 - 107.000

Tempo pieno

9 giorni fa

Una candidatura completa in un minuto

Curriculum e lettera di presentazione personalizzati, pronti da inviare.

Supera i filtri ATS

Vantaggi offerti da questo lavoro

Extended health care coverage
Bi-weekly direct deposit

Descrizione del lavoro

All-Equip is seeking an experienced Intermediate Mechanical Designer to move from concept to production, closely collaborating with production and a team of engineers to create durable, practical trailer solutions. You will influence product direction, engineering standards, and team growth while validating designs on the shop floor.

Responsibilities include end-to-end design of chassis and suspension, creating high-quality CAD models in Onshape, and mentoring junior engineers in a hands-on

Competenze

  • 3+ years of mechanical design experience in trailer manufacturing or related industries.
  • Strong hands-on experience with structural design, weldments, and sheet metal fabrication.
  • Proficiency in Onshape or comparable parametric CAD software.
  • Strong knowledge of GD&T and engineering drawing standards.
  • Experience mentoring engineers and leading teams.

Mansioni

  • Design and develop grain, specialty, and custom trailer systems from initial concept through production release.
  • Own the end-to-end design of chassis, suspension systems, structural assemblies, and related components.
  • Build and maintain high-quality 3D CAD models and manufacturing drawings in Onshape.
  • Translate customer requirements, field feedback, and manufacturing needs into practical, buildable designs.
  • Apply transportation, safety, structural, and load standards while understanding the intent behind engineering requirements.
  • Collaborate directly with production teams to improve manufacturability, reduce complexity, and optimize product performance.
  • Provide technical guidance and mentorship to developing engineers, helping build capability and consistency across the engineering team.
  • Participate in design reviews, prototyping activities, validation testing, and continuous product improvement initiatives.
  • Identify opportunities to improve existing products, engineering standards, and design processes.
  • Spend time on the shop floor validating designs, supporting production, and resolving manufacturing challenges.
  • Support root-cause analysis and corrective actions related to design and maintain engineering documentation, revision control, and product data management standards.
  • Collaborate across departments to ensure engineering decisions align with business, manufacturing, and customer requirements.

Conoscenze

Structural design
Weldments
Sheet metal fabrication
Onshape
GD&T
Engineering drawings
Leadership
Shop floor time

Formazione

Post-secondary education in Mechanical Engineering

Strumenti

Onshape

Descrizione del lavoro

2302 Rd 125, St. Marys, ON N4X 1C9, Canada

The Opportunity

We're looking for an experienced mechanical designer who wants to do more than create drawings. You'll be responsible for developing products that are manufactured and used in the real world, working directly with production, and a team of engineers to turn ideas into durable, practical solutions. At All-Equip, the people designing our products are closely connected to the manufacturing process, giving you the opportunity to continuously refine and improve your work based on direct feedback from the shop floor and the field. You'll have a meaningful voice in product direction, engineering standards, and how our engineering team continues to grow.

Work Arrangement
  • Full-Time, fully on-site at, Monday to Friday, 7AM-4PM.
Compensation

This is a salaried position paying $55,000–$75,000/year depending on experience, plus a comprehensive benefits package including Extended Health Care. We believe in paying fairly for genuine expertise, practical knowledge, and the ability to deliver results.

About Us

All-Equip is a family-owned manufacturer. sector, we’ll find a way to build it. Founded in 2011, we’ve grown into a recognized leader in both trailer manufacturing and heavy equipment repair and service, and it’s that repair experience that gives us a real edge. We’ve seen what fails in the field, and what holds up under pressure. That knowledge is baked into everything we do.

Learn more about what we do: allequiprepair.ca and platinumtrailersmfg.com

The Role

As our Intermediate Mechanical Designer, you'll work closely with production, leadership, and a team of developing engineers, helping transform experience from the field into products that continually improve on what already exists. This role extends beyond creating models and drawings, you'll be expected to validate your work in production, participate in problem-solving on the shop floor, mentor engineers, and contribute meaningfully to the future direction of our products and engineering team.

Key Responsibilities
  • Design and develop grain, specialty, and custom trailer systems from initial concept through production release.
  • Own the end-to-end design of chassis, suspension systems, structural assemblies, and related components.
  • Build and maintain high-quality 3D CAD models and manufacturing drawings in Onshape, establishing best practices for design documentation.
  • Translate customer requirements, field feedback, and manufacturing needs into practical, buildable designs.
  • Apply transportation, safety, structural, and load standards while understanding the intent behind engineering requirements.
  • Collaborate directly with production teams to improve manufacturability, reduce complexity, and optimize product performance.
  • Provide technical guidance and mentorship to developing engineers, helping build capability and consistency across the engineering team.
  • Participate in design reviews, prototyping activities, validation testing, and continuous product improvement initiatives.
  • Identify opportunities to improve existing products, engineering standards, and design processes.
  • Spend time on the shop floor validating designs, supporting production, and resolving manufacturing challenges.
  • Support root-cause analysis and corrective actions related to design and Maintain engineering documentation, revision control, and product data management standards.
  • Collaborate across departments to ensure engineering decisions align with business, manufacturing, and customer requirements.
What We Offer
  • Full-time salaried position with stable, long-term career opportunities.
  • Extended health care coverage.
  • Bi-weekly direct deposit.
Qualifications & Experience
  • 3+ years of mechanical design experience in trailer manufacturing, heavy transportation, agricultural equipment, or similar industries.
  • Strong hands-on experience with structural design, weldments, and sheet metal fabrication.
  • Proficiency in Onshape or comparable parametric CAD software.
  • Experience building and maintaining organized CAD models, assemblies, and drawing libraries.
  • Deep understanding of manufacturing processes including welding, machining, cutting, forming, and fabrication.
  • Strong knowledge of GD&T and engineering drawing standards.
  • Practical understanding of assembly methods, fit-up requirements, and real-world manufacturing constraints.
  • Ability to structure CAD models and drawings that accurately reflect how products are manufactured and assembled.
  • Familiarity with materials selection, durability considerations, load calculations, and structural design principles for heavy-duty applications.
  • Strong attention to detail and problem-solving skills, with the ability to identify issues before they reach production.
  • Experience balancing multiple projects, priorities, and deadlines independently.
  • Strong communication and leadership skills, with the ability to support and develop junior engineers.
  • Comfortable working in a hands-on manufacturing environment and spending time on the shop floor.
Education & Certifications
  • Post-secondary education in Mechanical Engineering, Mechanical Engineering Technology, or a related field.

All Equip is a diverse and equal-opportunity employer.

Ottieni la revisione del curriculum gratis e riservata.

o trascina qui il file.

Similar jobs

Offerte di lavoro simili che vale la pena confrontare

Mechanical Design Engineer
Mechanical Design Engineer

Express Employment Professionals - Cambridge • Cambridge

In loco
CAD 65.000 - 90.000
Mechanical Designer
Mechanical Designer

Tri-Mach Group Inc. • Elmira

In loco
CAD 48.000 - 59.000
Mechanical Designer
Mechanical Designer

itec group Inc. • Milton

In loco
CAD 70.000 - 90.000
Mechanical Engineer
Mechanical Engineer

Goldbeck Recruiting • Winnipeg

In loco
CAD 70.000 - 100.000
Health Benefits
Health spending account
Paid Vacation
+2
Senior Mechanical Design Engineer / Technologist
Senior Mechanical Design Engineer / Technologist

JBS Equipment • Mission

In loco
CAD 85.000 - 125.000
Health benefits
Dental coverage
RRSP matching
+1
Mechanical Designer
Mechanical Designer

Ellos HR Solutions • Kitchener, Cambridge, Southwestern Ontario

In loco
CAD 70.000 - 95.000
Health insurance
Dental insurance
RRSP matching
+3
Labourer
Labourer

All Equip Repair • Perth South

In loco
CAD 28.000 - 36.000
Extended Health Care
Dental benefits
RRSP contributions
+2
Mechanical Designer
Mechanical Designer

C.G. Consulting Group • Grimsby

In loco
CAD 70.000 - 85.000
Company paid benefits
RRSP match
Vacation allowance
+1
Mechanical Designer
Mechanical Designer

Tri-Mach Group (TMG) • Elmira

In loco
CAD 48.000 - 59.000
Welding Shop Supervisor
Welding Shop Supervisor

All Equip Repair • Perth South

In loco
CAD 44.000 - 55.000
Comprehensive Health Benefits
RRSP matching plan
Bi-weekly direct deposit
+2