Electronic Assembler - 4x10s Schedule

B.E. Meyers & Co., Inc.

Redmond

On-site

AUD 60,000 - 91,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Comprehensive medical coverage
Vision coverage
Dental coverage
401(k) retirement plan
Disability insurance
Life insurance
Paid parental leave
Vacations and holidays

Job summary

B.E. Meyers & Co., Inc. is seeking an Electronic Assembler at multiple levels to join the Production team.

Under moderate supervision, you will perform mechanical, optical and electrical assembly and test operations that meet company standards. Responsibilities include basic testing and inspection, collaborating with the team to meet assembly requirements, and following ESD practices to ensure product quality and safety.

Qualifications

  • Experience in an assembly environment.
  • Able to read and interpret assembly drawings.
  • Familiar with IPC J-STD-001 is a plus.
  • Must follow ESD protocols during handling.

Responsibilities

  • Perform basic testing and inspection to ensure parts and assemblies meet standards.
  • Collaborate with team to meet all assembly requirements.

Skills

Reading drawings
Soldering
ESD protocols
Microscope handling
Use basic hand tools

Education

High School Diploma or GED

Tools

Heat gun
Screwdriver
Syringe
Q-tips
Epoxy
Microscope

Job description

Job Title

Electronic Assembler – Multiple Levels

Department

Production

Reports To

Production Manager

SUMMARY

While working under moderate supervision the Electronic Assembler is responsible for performing mechanical, optical and electrical assembly and test operations that meet or exceed established company standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
  • Perform basic testing and inspection to ensure parts and assemblies meet
  • Work with team to meet all assembly requirements.
Supervisory Responsibilities

None

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Electronic Assembler I

Experienced working in an assembly environment. Able to read and interpret assembly drawings. Use basic tools to assembly, apply epoxy, and clean units. (Heat gun, screwdriver, syringe, q-tips, epoxy) May be asked to complete limited soldering. May complete tests that require hand eye coordination or the ability to sense a difference in tightness of knobs or screws. Must be familiar with and practice proper electrostatic discharge (ESD) protocols.

Electronic Assembler II

Able to complete all tasks that are assigned to Electronic Assembler I. Additionally, with oversight, able to solder through-hole components, lugs, and connectors. Must have and be able to maintain IPC J-STD-001 certification.

AND/OR – Electronic Assembler II variant

Able to complete all tasks that are assigned to Electronic Assembler I. Additionally, with oversight, able to demonstrate understanding of handling, proper cleaning and installation of optics.

Electronic Assembler III

Able to complete all tasks that are assigned to Electronic Assembler II. Additionally, able to read and interpret all drawings and documentation. Works independently completing through-hole soldering, surface-mount soldering, and will complete approved rework. Has the ability to solder laser diodes and other sensitive components. Able to solder while using a microscope. Must have and be able to maintain IPC-J-STD-001certification.

AND/OR – Electronic Assembler III variant

Able to complete all tasks that are assigned to Electronic Assembler II. Additionally, able to read and interpret all drawings and documentation. Ability to work with optics under a microscope. Demonstrated ability with fine details – diode prep, diode module assembly, lens assemblies and preps.

EDUCATION And/or EXPERIENCE

High School Diploma or general education degree (GED); and six + months related experience and/or training; or equivalent combination of education and experience.

  • Experience with soldering (IPC J-STD-001Certified preferred).
  • Experience with ESD
  • Experience with ISO 9001:2000
Language Skills

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, assembly drawings and procedure manuals. Employee must be able to read, write and communicate in the English language.

Export Control Requirements

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R.

  • 120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
EXPORT CONTROL DETAILS

US based job, US Person required

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

The employee must be able to lift 25 pounds on an occasional basis and must be able to perform various assembly operations requiring manual dexterity and repetitive motions. The employee will be required to stand, climb or balance, stoop, kneel, crouch, and regularly requires walking, sitting, talking, and using hands to finger, handle or feel. Specific vision abilities required by this job are close, distance, color and peripheral vision, depth perception and the ability to adjust focus is required to produce and inspect product or components for quality and cleanliness.

Compensation And Benefits
  • comprehensive medical coverage
  • vision coverage
  • dental coverage
  • 401(k)-retirement plan
  • short & long-term disability insurance
  • life insurance
  • paid parental leave
  • various other discounts and perks
  • 10 days paid vacation & paid holidays
  • 1 Floater per year
  • 1 hour of paid sick time for every 40 hours worked
WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Employee may be exposed to environments that require specific temperature limitations and may be exposed to chemicals, fumes, cleaners and solvents. Employee may be required to wear protective clothing and/or other apparatus for handling materials or work within ESD and Laser controlled areas including, gloves, cots, hair covers, ESD lab coats, safety glasses/goggles and face masks.

While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts and risk of electrical shock. The noise level in the work environment is usually moderate.

Employment with B.E. Meyers & Co. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, Veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Engineer
Manufacturing Engineer

B.E. Meyers & Co., Inc. • Redmond

On-site
AUD 128,000 - 185,000
Assembly Technician - Electronics Manufacturing
Assembly Technician - Electronics Manufacturing

Advanced Navigation • Sydney

On-site
AUD 65,000 - 90,000
Quality Inspector - 2nd Shift
Quality Inspector - 2nd Shift

Mack Technologies • Melbourne

On-site
AUD 65,000 - 90,000
Test and Evaluation Lab Technicians (Experienced)
Test and Evaluation Lab Technicians (Experienced)

Boeing Co. • Berkeley

On-site
AUD 94,000 - 127,000
Manufacturing Specialist (Optical Production) - Both Shifts
Manufacturing Specialist (Optical Production) - Both Shifts

SpaceX • Redmond

On-site
AUD 68,000 - 102,000
Stock options
Long-term incentives
Bonuses
+6
Assembly Mechanic - Quality Inspector
Assembly Mechanic - Quality Inspector

Boeing Co. • Berkeley

On-site
AUD 49,000 - 104,000
Assembly Mechanic - Quality Inspector
Assembly Mechanic - Quality Inspector

Boeing Co. • Churchill

On-site
AUD 49,000 - 62,000
Surface Mount Operator / Electronics Assembler
Surface Mount Operator / Electronics Assembler

The Elexon Group of Companies • Brisbane

On-site
AUD 55,000 - 75,000
9 Day Fortnight
Career development
Employee Assistance Program
Assembly Technician - Fiber Optical assembly
Assembly Technician - Fiber Optical assembly

Advanced Navigation • Sydney

On-site
AUD 65,000 - 90,000
High-impact work
Modern facilities
Career growth
+1
Electronic Assembler
Electronic Assembler

Fuse Recruitment • Brisbane

On-site
AUD 45,000 - 51,000
Top locations