Construction Manager – High-Rise & Towers (Civil)

ATGC Transport and General Contracting L.L.C; Abu Dhabi; Vor Ort; AED 469.000 - 692.000; Vollzeit

Zusammenfassung

ATGC Transport and General Contracting L.L.C is seeking a Construction Manager to lead on-site superstructure works in Abu Dhabi. You will oversee core and shell construction from ground-floor handover to top floors, coordinating self-climbing formwork, PT slabs, crane logistics, and rigorous safety standards.

The role demands 15–20+ years in UAE, including 10–12+ years as CM with a main contractor on high-rise frames.

Qualifikationen

• Bachelor’s Degree in Civil Engineering from a recognized university.
• 15 to 20+ years of civil engineering and site construction experience in UAE.
• 10 to 12+ years as a Construction Manager with a Main Contractor on high-rise frames (G+30 to G+60+).
• Deep knowledge of self-climbing formwork, post-tensioned concrete, and tower crane logistics.
• Proficiency with AutoCAD, Primavera P6, MS Project, Aconex/Procore.

Aufgaben

• Lead and execute core & shell superstructure from ground floor to top floors.
• Direct hydraulic self-climbing core wall systems and PT slab systems on-site.
• Manage formwork schedules, rebar assembly, and PT tendon stressing to optimize cycle times.
• Oversee vertical site logistics: climbing cranes, hoists, platforms, safety screens.
• Coordinate civil openings, blockouts, and embeds prior to pours.
• Ensure lift shaft compliance and elevator handover readiness.
• Maintain QA/QC and close NCRs with supervision consultant.

Kenntnisse

High-rise construction management

Structural coordination

Safety management

Quality assurance

Site logistics planning

Ausbildung

Bachelor’s Degree in Civil Engineering

Tools

AutoCAD

Primavera P6

MS Project

Aconex

Procore

Jobbeschreibung

The Construction Manager is directly responsible for leading and executing all superstructure civil and structural works on-site—starting from the ground floor slab/substructure handover through to self-climbing core walls, post-tensioned slabs, vertical concrete pumping, structural topping out, external masonry, and civil builder's works.

Key Responsibilities

1. Core & Shell Superstructure Execution

• Take over site custody at ground slab level to commence superstructure vertical framing.
• Direct hydraulic self-climbing / jump-form core wall systems, slip-forms, post-tensioned (PT) slab systems, heavy rebar placement, and high-strength concrete casting.
• Drive floor-to-floor structural cycle times (targeting optimized 4-6 day cycles) by coordinating formwork stripping schedules, rebar coupler assembly, and PT tendon stressing.
• Manage high-rise concrete pumping logistics: high-pressure stationary pumps, static slicklines, self-climbing concrete placing booms, mix design compliance, and pour rate management.

2. Vertical Site Logistics & Equipment Operations

• Manage vertical site logistics: climbing tower crane operations, high-speed passenger/material hoists, cantilevered loading platforms, and perimeter climbing safety screen systems.
• Plan and control material staging yards, rebar fabrication yards, formwork maintenance, and vertical steel/concrete lifting sequences.
• Coordinate vertical distribution of structural concrete, reinforcement steel, formwork tables, and masonry materials across active floors.

3. Architectural Civil & Builder's Works

• Oversee structural release dates to facilitate early facade bracket anchor embeds and masonry blockwork.
• Manage internal civil/builder's works: high-rise blockwork, internal brickwork, concrete housekeeping pads/bases, floor screeding, and wet area waterproofing.
• Coordinate civil openings, blockout sleeves, wall chasers, and cast-in embeds (BWIC) prior to concrete pours.
• Ensure lift shaft civil compliance (vertical plumbness, divider beams, pit waterproofing, and hoistway tolerances) prior to elevator handovers.

4. Technical Coordination, Quality & HSE

• Enforce strict adherence to approved Civil/Structural Method Statements, Inspection & Test Plans (ITPs), and structural specifications.
• Manage structural QA/QC processes, ensuring prompt clearance of Work Inspection Requests (WIRs) and resolution of Non-Conformance Reports (NCRs) with the Supervision Consultant.
• Review structural working drawings and Bar Bending Schedules (BBS) to resolve rebar congestion, cold joint locations, and constructability issues before casting.
• Champion high-rise site civil safety: edge protection, drop prevention platforms, heavy lifting protocols, and tower crane operations safety.

Key Performance Indicators (KPIs)

• Structural Floor Cycle: Maintaining the target floor-to-floor cycle speed (e.g., 4-6 days per floor).
• Structural Quality: Zero major structural non-conformances (NCRs) and first-time pass rates on structural WIRs.
• Concrete & Rebar Yield: Minimizing rebar scrap percentage and concrete wastage against BOQ allowances.
• Safety Record: Zero lost-time injuries (LTI) on structural, heavy lifting, and formwork operations.

Required Qualifications & Experience

• Education: Bachelor’s Degree in Civil Engineering from a recognized university.
• Total Experience: 15 to 20+ years of civil engineering and construction site experience in UAE.
• Minimum 10 to 12+ years specifically as a Construction Manager with a Main Contractor executing high-rise superstructure frames (G+30 to G+60+ storeys).
• Technical Mastery: Deep technical command of self-climbing jump-form systems, post-tensioned concrete, high-pressure vertical concrete pumping, climbing tower crane logistics, and high-rise civil builder's works.
• Software & Tools: AutoCAD, Primavera P6 (working knowledge for look-ahead schedules), MS Project, and Document Management platforms (e.g., Aconex, Procore).