Fitter & Turner (R15K-R32K Negotiable)

PPC Recruitment

Johannesburg

On-site

ZAR 300,000 - 420,000

Full time

14 days+

Get a reply from this recruiter

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

PPC Recruitment has a role for a Fitter & Turner to maintain, repair and optimise roofing machinery and plant equipment in a leading steel supply company. The job requires strong fitting, turning and machining skills and the ability to work on mechanical and electrical equipment, interpret technical drawings and operate workshop machinery.

You will contribute to improving equipment reliability, production efficiency, quality and cost-effectiveness.

Qualifications

  • Minimum NQF Level 4 - 5 Grade 12+ / Higher certificate.
  • Artisan Qualification as Red Seal Fitter and Turner Essential.
  • Must be able to use engineering measuring instruments.
  • Minimum 5 years’ experience in machinery and equipment.
  • Excellent communication skills, fluent in English.
  • Strong analytical and problem-solving skills.
  • Excellent organizational and time management skills.
  • Knowledge of the Roofing products, machinery and equipment will be an advantage.
  • Ability to read technical drawings, assembly diagrams, and installation manuals.
  • Must be prepared to work overtime. Knowledge of SHEQ.
  • Assembly and maintenance of, steel, Roofing Machines and Equipment.

Responsibilities

  • Repair and maintenance of various other machines in the plant, press machines, guillotines, seaming machines all equipment will have mechanical and electrical work required.
  • Load/unload parts from machine.
  • Works from detailed drawings.
  • Lays out reference lines and points as a guide in machining operations when necessary.
  • Sets up milling machines by positioning and locating work piece and clock workpiece with clocking gauges.
  • Set up Lathe Machines – Clamping, clocking, and measuring out work pieces.
  • Control and adjust machine settings – Speeds and feeds.
  • Operation of assigned machines including milling, lathe, horizontal and vertical saws, grinders, and drill presses.
  • Performs routine preventative maintenance and cleaning on assigned machines.
  • Use of hand tools and measuring equipment needed to perform the job.
  • Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments.
  • Following operational plans to ensure defined project deadlines are met.
  • Comply with work rules, standards, and methods.
  • Comply with Safe work methods implemented in the workshop.
  • Prioritize production outputs and delivery times based on agreed timelines.
  • Conduct safety assessments within the workshop and comply with methods of operation.
  • Conduct thorough testing and troubleshooting and verifying proper operation of machine prior to use.
  • Identify and troubleshoot any issues or malfunctions, taking appropriate corrective measures.
  • Recommend viable solutions to reduce production costs as well as improve production processes and product quality.
  • Perform routine inspections on hand tools and consumables at your workstation.
  • Identify opportunities for process improvement and contribute to enhancing production procedures and service quality.
  • Ensure housekeeping and SHEQ requirements.
  • Ability to work with micrometers and other measuring equipment.

Skills

Fitting
Turning
Machining
Drawings reading
Measuring instruments
Communication

Education

NQF Level 4-5 / Grade 12+
Artisan Qualification Red Seal Fitter & Turner

Tools

Milling machines
Lathe machines
Drill presses
Guillotines
Calipers/micrometers

Job description

The successful Fitter & Turner will be responsible for maintaining, repairing and optimising roofing machinery and plant equipment within a leading steel supply company. The role requires strong fitting, turning and machining skills, with the ability to work on mechanical and electrical equipment, interpret technical drawings and operate workshop machinery. The position will also contribute to improving equipment reliability, production efficiency, quality and cost-effectiveness.

Qualification and Experience
  • Minimum NQF Level 4 - 5 Grade 12+ / Higher certificate
  • Artisan Qualification as Red Seal Fitter and Turner Essential
  • Must be able to use engineering measuring instruments.
  • Minimum 5 years’ experience in machinery and equipment.
  • Excellent communication skills, fluent in English.
  • Strong analytical and problem-solving skills.
  • Excellent organizational and time management skills.
  • Knowledge of the Roofing products, machinery and equipment will be an advantage.
  • Ability to read technical drawings, assembly diagrams, and installation manuals.
  • Must be prepared to work overtime. Knowledge of SHEQ.
  • Assembly and maintenance of, steel, Roofing Machines and Equipment.
Responsibilities
  • Repair and maintenance of various other machines in the plant, press machines, guillotines, seaming machines all equipment will have mechanical and electrical work required.
  • Load/unload parts from machine.
  • Works from detailed drawings.
  • Lays out reference lines and points as a guide in machining operations when necessary.
  • Sets up milling machines by positioning and locating work piece and clock workpiece with clocking gauges.
  • Set up Lathe Machines – Clamping, clocking, and measuring out work pieces.
  • Control and adjust machine settings – Speeds and feeds.
  • Operation of assigned machines including milling, lathe, horizontal and vertical saws, grinders, and drill presses.
  • Performs routine preventative maintenance and cleaning on assigned machines.
  • Use of hand tools and measuring equipment needed to perform the job.
  • Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments.
  • Following operational plans to ensure defined project deadlines are met.
  • Comply with work rules, standards, and methods.
  • Comply with Safe work methods implemented in the workshop.
  • Prioritize production outputs and delivery times based on agreed timelines.
  • Conduct safety assessments within the workshop and comply with methods of operation.
  • Conduct thorough testing and troubleshooting and verifying proper operation of machine prior to use.
  • Identify and troubleshoot any issues or malfunctions, taking appropriate corrective measures.
  • Recommend viable solutions to reduce production costs as well as improve production processes and product quality.
  • Perform routine inspections on hand tools and consumables at your workstation.
  • Identify opportunities for process improvement and contribute to enhancing production procedures and service quality.
  • Ensure housekeeping and SHEQ requirements.
  • Ability to work with micrometers and other measuring equipment.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Qualified Fitter And Turner
Qualified Fitter And Turner

Advius (Pty) Ltd • South Africa

On-site
ZAR 300,000 - 460,000
Fitter & Turner
Fitter & Turner

Staff Unlimited Recruitment • Cape Town

On-site
ZAR 180,000 - 250,000
Mechanical Fitter / Fitter & Turner (New Plant}
Mechanical Fitter / Fitter & Turner (New Plant}

Morton Moore Pty Ltd • South Africa

On-site
ZAR 240,000 - 360,000
Medical aid
Provident fund
Overtime allowances
+3
Fitter And Turner (Manufacturing)
Fitter And Turner (Manufacturing)

Durpro Workforce Solutions • Durban

On-site
ZAR 279,000 - 390,600
Senior Mechanical Fitter & Turner
Senior Mechanical Fitter & Turner

Placements24 • Soweto

On-site
ZAR 420,000 - 540,000
Competitive salary
Overtime opportunities
Tools provided
+4
Mechanical Fitter & Turner
Mechanical Fitter & Turner

Placements24 • Klerksdorp

On-site
ZAR 600,000 - 800,000
Bonuses
Medical aid
Retirement fund
+2
(Fitter & Turner) Production & Electrical Maintenance Supervisor
(Fitter & Turner) Production & Electrical Maintenance Supervisor

Hire Resolve • KwaZulu-Natal

On-site
ZAR 450,000 - 750,000
Salary negotiable
Mechanical Fitter
Mechanical Fitter

SA Metal Group (Pty) Ltd • Cape Town

On-site
ZAR 240,000 - 360,000
Provident fund
Life cover 4x salary
Funeral cover
+2
Fitter & Turner: Machinery & Plant Optimisation Lead
Fitter & Turner: Machinery & Plant Optimisation Lead

PPC Recruitment • Johannesburg

On-site
ZAR 300,000 - 420,000
Qualified Mechanical Fitter
Qualified Mechanical Fitter

SA Metal Group (Pty) Ltd • Carletonville

On-site
ZAR 290,000 - 424,000