Welder- TX (2nd shift)

Mum Industries; Dallas (TX); On-site; USD 33,000 - 37,000; Full time

Benefits offered by this job

Medical coverage

Dental coverage

Vision coverage

Tuition reimbursement

401K with match

Job summary

MUM Industries seeks an experienced welder for its welding department in Dallas, TX. The role involves welding in flat, vertical, or overhead positions and requires safe work habits and familiarity with welding equipment. You will read drawings, inspect pieces, and select appropriate methods for various metals.

The position offers evening shifts, competitive hourly pay based on experience, and benefits. Join a team with a strong emphasis on quality and safety in a manufacturing setting.

Qualifications

• Possess a minimum of 2 years’ experience in welding in a manufacturing environment or equivalent training/education.
• Has 2 years or more experience with welding Aluminum Sheet Metal.
• Must have considerable knowledge of principles and practices of TIG Welding, effective oral, and written communication skills.

Responsibilities

• Weld components in flat, vertical, or overhead positions.
• Operate safety equipment and use safe work habits.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.

Skills

Welding experience

Aluminum welding

TIG welding

Tools

Calipers

Gages

Measuring tools

Job description

Job DetailsLevel: ExperiencedJob Location: Dallas, TX - Dallas, TX 75247Position Type: Full TimeEducation Level: NoneSalary Range: $24.00 - $27.00 HourlyTravel Percentage: NoneJob Category: ManufacturingBecome a success story in our Welding Department.

Hours: Monday thru Friday 2:30pm-11:00pm.

Pay: Based upon experience $24/hr-$27/hr

Position Summary:

• Weld components in flat, vertical, or overhead positions.
• Operate safety equipment and use safe work habits.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.

• Weld components in flat, vertical, or overhead positions.
• Operate safety equipment and use safe work habits.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.

• Weld components in flat, vertical, or overhead positions.
• Operate safety equipment and use safe work habits.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.

• Weld components in flat, vertical, or overhead positions.
• Operate safety equipment and use safe work habits.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Have thorough understanding of TIG Welding fundamentals and operation.
• Must have ability to produce quality welds on a variety of materials as needed.
• Set-up and maintain equipment, settings, gas, choosing proper rod etc.
• Read drawings and measure with gage’s, calipers etc. per instructions.
• Set-up and maintain production consistency, reviewing weld quality, proper fitting and weld techniques.
• Maintain organized, clean work area .
• Operate safety equipment and use safe work habits.
• Assist with other TIG Welders when needed.

Qualifications:

• Possess a minimum of 2 years’ experience in welding in a manufacturing environment or equivalent training/education.
• Has 2 years or more experience with welding Aluminum Sheet Metal.
• Must have considerable knowledge of principles and practices of TIG Welding, effective oral, and written communication skills.

About MUM Industries

We are always looking for driven, talented people to join our team.

Founded in 1996, MUM Industries, Inc. is the parent company to a diverse group of industrial product manufacturers: Integra Enclosures, EMF MFG, and StrongBox. With seven locations across the globe, MUM Industries provides the products and services how our customers need it, where they need it and when they need it.

We believe in empowering and nourishing our employees with the tools, skills, and knowledge needed to grow and succeed. We are committed to meeting and exceeding our customer’s expectations by providing world-class products and service through continuous improvement and innovation.

When you join MUM Industries, you join a family devoted to achieving the highest standards of success together. We support the development and empowerment of our employees through an environment fostering open communication, integrity, and respect. Our collaborative and rewarding atmosphere gives us the opportunity to work with and continuously learn from our intelligent, skilled colleagues.

The EMF Company has been manufacturing custom sheet metal enclosures for over 65 years. Through decades of experience, we have taken on every aspect of the manufacturing process and greatly expanded our products and capabilities to meet the needs of our customers.

MUM Industries offers great benefits listed below:

• Medical, Dental, Vision, and other voluntary coverages.
• 100% tuition reimbursement.
• 401K with company match no vesting schedule.