Welder 3 - PD Shop

Crenlo Engineered Cabs

Watertown (SD)

Vor Ort

USD 30.000 - 47.000

Vollzeit

vor 48 Stunden
Sei unter den ersten Bewerbenden

Erhalte eine Antwort von diesem Arbeitgeber

Dein Lebenslauf und dein Anschreiben, genau auf das zugeschnitten, was gesucht wird.

Schaffe es an den ATS-Filtern vorbei

Zusammenfassung

Crenlo Engineered Cabs in Watertown, SD (also supporting Greeneville, TN and Rochester, MN) seeks a Welder 3 in the Manual Weld department to weld protective structures and complex components. You will read blueprints, perform full-penetration welds across thicknesses and joints, and assist in training weld classifications.

Candidate must have 3–5 years welding experience, a high school diploma or GED, and 6GR certification; safety and quality are top priorities.

Qualifikationen

  • Reads blueprints, work orders, weld symbols and uses required tools.
  • Maintains safety practices and quality standards.
  • Performs welds on various thicknesses and joint types.

Aufgaben

  • Produces a product to customer quality standards safely and efficiently.
  • Lays out, positions, clamps, and tack-welds parts for welding.
  • Sets up equipment per blueprints and tolerances.
  • Performs welds per blueprints and quality guidelines.
  • Mentors new welders and supports training.

Kenntnisse

Blueprint reading
Safety practices
Quality awareness
Mathematics
Manual welding

Ausbildung

High school diploma or GED
6GR certification
Crenlo weld training program

Jobbeschreibung

Job Title: Welder 3

Location(s): Greeneville, TN -- Watertown, SD -- Rochester, MN

Department: Manual Weld

Job Code: Hourly

Reports to: Weld Supervisor

Job Code: Hourly

FLSA Status: Non-Exempt

Direct reports: No

Summary

Plans, positions, and welds fabricated and cast components on roll over/fall over protective structures, and specialized weldments. Performs work primarily on ROPS/FOPS structure welds completing all required welds, including sheet metal welds. Utilizes full-penetration, high critical joint welds without a backing material. Welds on all thickness, all joint types, and all positions. Assist in training requirements for all weld classifications and completion of required reports.

Key Responsibilities
  • Produces a product to customer quality standards in a safe and efficient manner.
  • Lays out, positions, bolts, clamp, and tack-weld parts to secure into position within fixture for welding.
  • Sets up and makes adjustments to equipment and parts per blueprints.
  • Performs welding responsibilities on product outlined in Blueprints; OPI's, Quality Manual, or any additional performance guidelines.
  • Grinds excess weld, sharp corners, or sharp protrusions using a portable pneumatic grinder.
  • Makes periodic quality checks as required and inspects finished product for completeness.
  • Aide in completion of 6GR testing for Weld 3 classification of new candidates
  • Utilized as weld training contact for weld lines and provides mentoring to new welders
  • Participates in Hi-Deposition Improvement Planning -- modification of weld procedures to increase safety, efficiency, and quality
  • Assist in tracking recertification of welders on a monthly basis with follow-up to weld trainer
  • Other duties as assigned
Key Skills And Competencies
  • Required to obtain weld certification to AWS/ANSI standards.
  • Basic knowledge of welding procedures,
  • Capability to read and interpret blueprints, work order instructions; weld symbols, and operate required tools involved in position.
  • Good problem-solving skills, safety practices and attention to quality.
  • Ability to convert standard units of measure to metric and metric to standard in addition to basic math skills.
  • Able to consistently maintain production averages at or above the expected standards.
Education And Experience Requirements
  • Minimum of a high school diploma or GED
  • Successful completion of Crenlo Engineered Cabs weld training program requirements, including 6GR certification
  • Crenlo basic safety training
  • 3 to 5 years weld experience
  • Maintains up-to-date knowledge of federal and state employment law, compliance, trends, new technologies and best practices in areas of responsibilities.
Note:

If a Weld 2 classified welder has not completed Weld 2 job duties within 6 months, welder must complete Weld 2 re-certification prior to performing Weld 2 job responsibilities.

Working Conditions/Other
  • Work Hours/Status: Varies depending on Shift- Regular Full-Time shifts range from 8-12 hours.
  • Travel Requirements: None
  • Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee frequently works near moving mechanical parts. The employee is regularly exposed to ultraviolet light radiation, heat radiation, and vibration. The noise level in the work environment is usually loud. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements.

  • Physical Requirements statement(s): The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus.

This position description is not intended to be an exhaustive list of all duties, responsibilities and competencies required of this position. Employees are held accountable for all aspects for the job, which are subject to change at any time. An individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

Welder 3 - PD Shop
Welder 3 - PD Shop

Engineered Cabs • Watertown (SD)

Hybrid
USD 30.000 - 41.000
401K retirement plan with company-ming
Tuition reimbursement
Health and dental insurance
Welder - 3rd Shift
Welder - 3rd Shift

Engineered Cabs • Greeneville (TN)

Vor Ort
USD 40.000 - 60.000
401K with company matching
Tuition reimbursement
Health, dental and vision insurance
+2
Welder - 1st Shift
Welder - 1st Shift

Crenlo • Greeneville (TN)

Vor Ort
USD 25.000 - 39.000
Welder - 1st Shift
Welder - 1st Shift

Engineered Cabs • Greeneville (TN)

Vor Ort
USD 25.000 - 36.000
401K retirement savings with company-m
Tuition reimbursement
Health, dental and vision coverage
Production Welder
Production Welder

New Leader Manufacturing • Cedar Rapids (IA)

Vor Ort
USD 25.000 - 39.000
WELDER 1st Shift Madison
WELDER 1st Shift Madison

EK • Madison (WI)

Vor Ort
USD 42.000 - 64.000
3rd Shift - Welder
3rd Shift - Welder

Ideal Electric Company • Mansfield (OH)

Vor Ort
USD 25.000 - 39.000
Welder Lead - Weekend Shift (Temp to Hire)
Welder Lead - Weekend Shift (Temp to Hire)

Dalsin Industries • BLOOMINGTON (MN)

Vor Ort
USD 30.000 - 47.000
Welder/Fitter
Welder/Fitter

Hayes Manufacturing • Pineville (LA)

Vor Ort
USD 42.000 - 64.000
2nd Shift Weld
2nd Shift Weld

Mobile Track Solutions, L.L.C. • Iowa

Hybrid
USD 25.000 - 39.000