Welder 1st

Enprotech, LLC

Cleveland (OH)

On-site

USD 30,000 - 47,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Health coverage for you and yourfamily
401(k) plan with company match
Disability, life, and AD&D insurance

Job summary

Industrious Group in Cleveland, OH, is seeking an experienced welder to join our manufacturing team. You will read and interpret blueprints, set up welding operations, and perform MIG/TIG/Stick welding with strict quality standards.

You’ll operate overhead cranes, use precision measuring tools, and ensure parts are pre-heated and stress-relieved as required. A strong safety mindset and the ability to work independently within a team are essential.

Qualifications

  • Ability to read, interpret, and follow basic blueprints, engineering drawings, bill of materials, and other written instructions or procedures.
  • Ability to use industry standards for proper equipment set-up and efficient use.
  • Familiar with welding gases and appropriate uses to determine type of welding to be used, such as metallic arc, inert gas, electrode, and oven treatment, applying knowledge of metals to be joined, contours and angles to be formed, and specified stress tolerances.
  • Ability to work with typical shop equipment and power tools and operate overhead cranes and fork trucks with proficiency.
  • Ability to inspect welded joints, grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments.
  • Ability to check over engineering drawings and specifications to plan welding operations.
  • Must be proficient in using and adjusting MIG welders to the proper amperage and voltage for welding with various sizes of flux core wire.
  • Must be able to handle tasks involving moderate physical exertion and must be able to stoop, bend, twist, and climb while working in confined areas at times.
  • Must be able to wear a positive-pressure welding hood if or when required.
  • Must be able to proficiently achieve time and quality standards without compromising welding safety standards.
  • Must be capable of operating overhead cranes to position or move work pieces.
  • Must be able to demonstrate basic welding skills during initial test which requires vertical and horizontal multiple-pass fillet welding on a small scale with 1/16 inch and 3/32 inch flux core and solid welding wire.
  • Must be able to interpret welding prints to determine what type of weld the prints require and where the weld is to be placed.
  • Must know what type of weld wire is used on different metals and what type of gas is used with the various welding wires.
  • Must be able to read a tape measure and read blueprints.
  • Must be able to use air, power, and hand tools, especially a torch and grinder.
  • Be mechanically inclined and able to gather and analyze relevant information, and coordinate work with other team members.
  • Be able to function independently within the context of the team’s day-to-day activities.
  • Able to properly pre-heat parts for effective welding and stress relieve finished components.
  • Work in a safe manner at all times, following established policies and procedures.
  • Must provide own welder’s tools and equipment of the trade to perform duties.

Responsibilities

  • Welds metal parts together using gas welding or brazing and arc welding processes.
  • Perform related tasks such as thermal cutting and grinding.
  • Repairs broken or cracked parts, fills holes, and welds overlay metal parts.
  • May locate cracks using die penetrant NDT methods and repair cracks in large fabrications.
  • Positions and sets up components in preparation for weld repairs and/or fabrication.
  • Lays out parts and assemblies according to specifications. Creates templates and other work aids to hold and align parts.
  • Welds components in flat, vertical, or overhead positions and adjusts amperage, voltage, and speed during joining to assure required weld deposit.
  • Inspects grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments.
  • Pre-heat parts for effective welding.
  • Perform quality work checks to ensure the product meets quality standards, using a variety of inspection tools and devices.

Skills

Blueprint reading
MIG welding
TIG welding
Stick welding
Overhead crane
Micrometers
Calipers
Quality inspection
Shop safety
Pre-heat welding

Education

High school diploma or equivalent

Tools

MIG welder
Flux core wire

Job description

Job Description

  • Welds metal parts together using both gas welding or brazing and any combination of arc welding processes.
  • Perform related tasks such as thermal cutting and grinding.
  • Repairs broken or cracked parts, fills holes, and welds overlay metal parts.
  • May locate cracks using die penetrant NDT methods and repair cracks in large fabrications.
  • Positions and sets up components in preparation for weld repairs and/or fabrication.
  • Lays out parts and assemblies according to specifications. Creates templates and other work aids to hold and align parts. Able to rig (cranes) and fixture parts to be welded.
  • Welds components in flat, vertical, or overhead positions and adjusts amperage, voltage, and speed during joining to assure required weld deposit.
  • Inspects grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments.
  • Pre-heat parts for effective welding.
  • Perform quality work checks to ensure the product meets quality standards, using a variety of inspection tools and devices.
Qualifications

Qualifications

Knowledge, Skills, and Abilities
  • Ability to read, interpret, and follow basic blueprints, engineering drawings, bill of materials, and other written instructions or procedures.
  • Ability to use industry standards for proper equipment set-up and efficient use.
  • Familiar with welding gases and appropriate uses to determine type of welding to be used, such as metallic arc, inert gas, electrode, and oven treatment, applying knowledge of metals to be joined, contours and angles to be formed, and specified stress tolerances.
  • Ability to work with typical shop equipment and power tools and operate overhead cranes and fork trucks with proficiency.
  • Ability to inspect welded joints, grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments.
  • Ability to check over engineering drawings and specifications to plan welding operations.
  • Must be proficient in using and adjusting MIG welders to the proper amperage and voltage for welding with various sizes of flux core wire.
  • Must be able to handle tasks involving moderate physical exertion and must be able to stoop, bend, twist, and climb while working in confined areas at times.
  • Must be able to wear a positive-pressure welding hood if or when required.
  • Must be able to proficiently achieve time and quality standards without compromising welding safety standards.
  • Must be capable of operating overhead cranes to position or move work pieces.
  • Must be able to demonstrate basic welding skills during initial test which requires vertical and horizontal multiple-pass fillet welding on a small scale with 1/16 inch and 3/32 inch flux core and solid welding wire.
  • Must be able to interpret welding prints to determine what type of weld the prints require and where the weld is to be placed.
  • Must know what type of weld wire is used on different metals and what type of gas is used with the various welding wires.
  • Must be able to read a tape measure and read blueprints.
  • Must be able to use air, power, and hand tools, especially a torch and grinder.
  • Be mechanically including and able to gather an analyze relevant information, and coordinate work with other team members.
  • Be able to function independently within the context of the team’s day-to-day activities.
  • Able to properly pre-heat parts for effective welding and stress relieve finished components.
  • Work in a safe manner at all times, following established policies and procedures.
  • Must provide own welder’s tools and equipment of the trade to perform duties.
Required Education and Experience
  • High school diploma or equivalent.
  • 2-5 years’ experience with stick, TIG, and MIG welding in a manufacturing environment.
  • Heavy cross-section welding experience a plus.
Additional Information
The benefits of joining our team

Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features:

  • Health coverage for you and your family through medical, dental and vision plans
  • 401(k) plan in with a generous company match
  • Financial protection through disability, life, and accidental death & dismemberment insurance plans
  • Tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars
  • Generous paid time off program in which the benefits increase along with your tenure with the company

When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success.

#INDPREM

Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Welder 2nd
Welder 2nd

Enprotech, LLC • Cleveland (OH)

On-site
USD 24,796 - 38,572
Health coverage
401(k) plan
Disability & life insurance
+2
Welder - 2nd Shift
Welder - 2nd Shift

Enprotech Corp • Lansing (MI)

On-site
USD 45,000 - 70,000
Health coverage
401(k) plan with company match
Disability & life insurance
+2
Welder - 1st Shift
Welder - 1st Shift

Kloeckner Metals Corporation • York

On-site
USD 25,000 - 36,000
401(k) with Company Match
Health insurance - Medical/Prescript/…
Dental
+14
Welder - 1st & 2nd shift
Welder - 1st & 2nd shift

Weldall Manufacturing, Inc. • Waukesha (WI)

On-site
USD 25,000 - 44,000
Direct Primary Care
Dental & Vision coverage
Short-Term Disability
+3
Welder
Welder

EMCOR Group • Winston-Salem (NC)

On-site
USD 42,000 - 64,000
Health Insurance
401(k) Retirement Plan
Tuition Reimbursement
+1
1st Shift Fabricator/Welder
1st Shift Fabricator/Welder

Jensen Metal Products Inc. • Racine (WI)

On-site
USD 42,000 - 64,000
Medical, dental, vision insurance
Wellness rewards program
Paid vacation and holidays
+3
Welder Fabricator
Welder Fabricator

Swanton Welding • Ohio

On-site
USD 28,000 - 34,000
Certified Welder II - MIG/TIG, Lead & Mentor
Certified Welder II - MIG/TIG, Lead & Mentor

Progressive Recovery, Inc. • Illinois

Hybrid
USD 34,000 - 43,000
Welder
Welder

Avero • Mishawaka (IN)

On-site
USD 55,000 - 75,000
Annual bonus
401(k) with company matching
Medical, dental, and vision insurance
+4
Welder
Welder

P & W QUALITY MACHINE, INC • Cedar Hill (TX)

On-site
USD 42,000 - 66,000