Welder

Commercial Steel Erection

Roanoke (VA)

On-site

USD 30,000 - 39,000

Full time

33 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

401k plan
Vacation/Paid time off
Medical, dental, vision benefits

Job summary

Commercial Steel Erection in Roanoke, VA is seeking a full-time Welder to join the Industrial Services team. You will weld metal parts to layout specifications, diagrams, or work orders on-site.

Safety and quality are paramount; you will follow OSHA, AISC and AWS standards, assist Foreman, inspect equipment, and prepare parts while maintaining bead size and proper fusion. Travel may be required; a welding certification and valid driver's license are required.

Qualifications

  • Minimum 2 years of welding experience on various metal parts.
  • Welding Certification required; valid driver's license.
  • Ability to travel and pass a pre-employment drug screen.
  • Knowledge of OSHA, AISC & AWS standards and safe work practices.

Responsibilities

  • Welds metal parts per layout, welding diagram, or work order.
  • Assist Foreman on site, identify hazards and maintain safety.
  • Prepare parts for welding, select electrode, flux, and equipment.
  • Maintain bead size, merge edges, and inspect weld quality.
  • Follow welding chart specifications and regulate gas/torch settings.

Skills

Welding Certification
Valid Drivers License

Job description

Welder (Full Time)
Location: Roanoke
Department: Industrial Services

Summary

Welds metal parts with welding equipment as specified by layout, welding diagram, or work order by performing the following duties.

Essential Duties and Responsibilities include the following

Other duties may be assigned.

1. Understands OSHA, AISC & AWS Standards relating to welding and that working safely is a job requirement.
  • Understands and complies with CSE, Inc. Safety Program, rules, regulations and updates; works within AISC Standard Practice codes relating to welding
  • *Becomes familiar with supervisory personnel, job activity to be performed, site hazard communication program, site safety rules and regulations, and site emergency action**
2. Follows directions and assumes responsibility of assisting Foreman on site by completing the following tasks:
  • Assists with inspecting and identifying hazards associated with all welding
  • Positions parts in jigs or fixtures on bench floor, or clamps parts together along with layout
  • Obtains specified electrode and inserts electrode into portable threads consumable electrode wire through portable welding
  • Selects torch, torch tip, filler rod and flux, according to welding chart specifications or type and thickness of
  • Connects cables from welding unit to obtain amperage, voltage, slope, and pulse; Connects regulator valves and hoses to oxygen and fuel gas cylinders, and welding
  • Strikes (forms) arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work
  • Turns regulator valves to activate flow of gases, lights torch and adjusts gas mixture and pressure to obtain desired
  • Manually guides electrode or gun along weld line, maintaining length of air and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten
  • Holds torch at proper angle and guides along weld joint, applying filler rod to molten area to form
  • Fits materials together prior to
  • Has thorough knowledge in fabrication including lay-out, cutting, grinding
  • Has the ability to weld FCAW, SMAW, and3. Assumes responsibility of inspecting equipment, structures and/ or material
  • Examines weld for bead size and other
  • Repairs broken or cracked metal objects, fills holes, and builds up metal
  • Prepares parts for welding by grooving or scarfing surfaces; Welds along vertical flat, horizontal or overhead weld
  • Scarfs or grooves weld prior to applying filler metal; Chips or grinds off excess weld, slag, or
  • Cleans or degreases weld joint or work piece; tacks assemblies*
Supervisory Responsibilities

This job has no supervisory responsibilities.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty safely and satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience

2+ years of experience.

Language Skills

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence.

Mathematical Skills

Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of weight measurement, volume, and distance.

Reasoning Ability

Ability to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Certificates, Licenses, Registrations

Welding Certification, Valid Drivers License

Other Qualifications

Must be able to travel.Must be able to pass a pre-employment drug screen.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds and occasionally lift and/or move more than 100 pounds.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to vibration. The noise level in the work environment is usually loud.

CSE offers competitive wages, vacation/personal time, medical, dental, vision, and other competitive benefits, including a 401k plan.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Fabricator - Welder
Fabricator - Welder

Commercial Steel Erection • Roanoke (VA)

On-site
USD 25,000 - 39,000
Welder
Welder

Sherman and Reilly Inc • Chattanooga (TN)

On-site
USD 25,000 - 39,000
Skilled Welder: Fabrication & Precision Welding
Skilled Welder: Fabrication & Precision Welding

Cwdusttech • Texas

On-site
USD 40,000 - 55,000
Welder (Beam) 1st Shift - $1000 Sign-on Bonus
Welder (Beam) 1st Shift - $1000 Sign-on Bonus

Engineering Services and Products Company • Dyersville (IA)

On-site
USD 42,000 - 64,000
Welder
Welder

Cwdusttech • Texas

On-site
USD 40,000 - 55,000
Welder/Fitter
Welder/Fitter

Hayes Manufacturing • Pineville (LA)

On-site
USD 42,000 - 64,000
Welder
Welder

Commercial Steel Erection • Chester (VA)

On-site
USD 42,000 - 65,000
Welder
Welder

ICS, Inc (Industrial Contract Services) • Grand Forks (ND)

On-site
USD 42,000 - 64,000
Welder
Welder

Venom Fabrication LLC • Lubbock (TX)

On-site
USD 24,796 - 38,572
Welder
Welder

Brown and Root Industrial Services • Baytown (TX)

On-site
USD 52,000 - 72,000
401K with company match
Medical insurance
Dental insurance
+7