Weld Robot Operator

High Bar Brands

Fresno (CA)

On-site

USD 25,000 - 44,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

High Bar Brands in Fresno is seeking a Weld Robot Operator to manage the end-to-end cycle of automated welding production and final component assembly. You will load raw fabrication parts into fixtures and run pre-programmed FANUC welding tasks.

This role requires careful quality checks, safe handling of hot assemblies, and performing manual spring attachments to complete the build. Expect 1st and 2nd shifts with basic maintenance of weld cells.

Qualifications

  • Experience working with automated machinery on manufacturing lines.
  • Prior experience with FANUC robotics interfaces and Teach Pendant handling preferred.
  • Strong manual dexterity and coordination to attach springs and hardware.
  • Ability to read blueprints, SOPs and BOM routing sheets.
  • Attention to detail in welds and material quality inspections.

Responsibilities

  • Load parts into welding fixtures with proper alignment.
  • Operate and troubleshoot FANUC weld cells.
  • Monitor welding paths, arc stability, and cycle flow.
  • Unload hot assemblies and verify joint integrity.
  • Attach springs and sub-assemblies after welding.
  • Perform visual quality audits for weld defects.
  • Maintain weld torch tips and fixtures to prevent slag buildup.

Skills

Manufacturing Experience
FANUC Robotics
Mechanical Aptitude
Attention to Detail
Blueprint Literacy

Tools

FANUC Robotics

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Weld Robot Operator

Overhead Full Time Operator Fresno, CA, US

2 days ago Requisition ID: 1188

Position Summary

The FANUC Weld Robot Technician & Assembly Operator is responsible for managing the complete end-to-end cycle of automated welding production and final component mechanical assembly. This vital manufacturing role involves precision loading of raw fabrication parts into customized engineering fixtures, executing pre-programmed welding tasks using FANUC robotic system controls, conducting quality inspections, and performing manual secondary assemblies by installing spring components to complete the final product sequence.

Key Responsibilities & Core Workflow Sequence
  • Fixture Setup & Parts Loading:Load raw parts accurately into designated welding fixtures, ensuring perfect physical alignment and engagement with manual or pneumatic clamping systems.
  • FANUC Robotics Operation:Operate, monitor, and basic-troubleshoot FANUC robotic weld cells utilizing the FANUC Teach Pendant interface to activate standard production programs.
  • Process Monitoring:Oversee the automated cycle to verify optimal welding paths, arc stability, and sequence consistency, quickly pausing operations if cycle faults or line bottlenecks occur.
  • Unloading & Post-Weld Handling:Carefully extract hot welded assemblies from fixtures using proper personal protective equipment (PPE) and verify joint integrity.
  • Spring Attachment & Final Assembly:Perform manual secondary operations immediately after welding by attaching specific spring components, mechanical tension clips, or sub-assemblies to complete the build specification.
  • Quality Assurance:Conduct frequent visual quality audits on finished products to identify weld defects such as burn-through, spatter, or structural voids prior to downstream hand-off.
  • Equipment Care:Keep FANUC weld torch tips, nozzles, and localized workspace fixtures clear of excessive slag and debris through routine preventative maintenance.
Qualifications & Technical Requirements
  • Manufacturing Experience:Demonstrated experience working alongside automated machinery, industrial assembly lines, or customized production fixtures.
  • Robotic Familiarity:Prior experience with FANUC robotics interfaces, Teach Pendant handling, or automated arc welding systems is highly preferred.
  • Mechanical Aptitude:Strong manual dexterity and coordination required to quickly attach physical springs and structural hardware components cleanly.
  • Attention to Detail:A sharp eye for physical layout variations, seam tracking deviations, and surface defects on raw and finished metals.
  • Blueprint Literacy:Capable of interpreting simple blueprints, standard operating procedures (SOPs), and bill-of-materials routing sheets.
Physical Demands & Environmental Working Conditions
  • Ability to stand, bend, lean, and move efficiently around automated cells for the duration of an 8 to 12-hour factory shift.
  • Capability to lift, push, pull, or carry raw inventory and heavy final assemblies weighing up to 50 lbs on a regular basis.
  • Comfortable working in a dynamic heavy manufacturing environment characterized by high-heat automated arcs, ambient dust, flashes, and industrial ambient noise levels.
Position Summary

The FANUC Weld Robot Technician & Assembly Operator is responsible for managing the complete end-to-end cycle of automated welding production and final component mechanical assembly. This vital manufacturing role involves precision loading of raw fabrication parts into customized engineering fixtures, executing pre-programmed welding tasks using FANUC robotic system controls, conducting quality inspections, and performing manual secondary assemblies by installing spring components to complete the final product sequence.

Key Responsibilities & Core Workflow Sequence
  • Fixture Setup & Parts Loading:Load raw parts accurately into designated welding fixtures, ensuring perfect physical alignment and engagement with manual or pneumatic clamping systems.
  • FANUC Robotics Operation:Operate, monitor, and basic-troubleshoot FANUC robotic weld cells utilizing the FANUC Teach Pendant interface to activate standard production programs.
  • Process Monitoring:Oversee the automated cycle to verify optimal welding paths, arc stability, and sequence consistency, quickly pausing operations if cycle faults or line bottlenecks occur.
  • Unloading & Post-Weld Handling:Carefully extract hot welded assemblies from fixtures using proper personal protective equipment (PPE) and verify joint integrity.
  • Spring Attachment & Final Assembly:Perform manual secondary operations immediately after welding by attaching specific spring components, mechanical tension clips, or sub-assemblies to complete the build specification.
  • Quality Assurance:Conduct frequent visual quality audits on finished products to identify weld defects such as burn-through, spatter, or structural voids prior to downstream hand-off.
  • Equipment Care:Keep FANUC weld torch tips, nozzles, and localized workspace fixtures clear of excessive slag and debris through routine preventative maintenance.
Qualifications & Technical Requirements
  • Manufacturing Experience:Demonstrated experience working alongside automated machinery, industrial assembly lines, or customized production fixtures.
  • Robotic Familiarity:Prior experience with FANUC robotics interfaces, Teach Pendant handling, or automated arc welding systems is highly preferred.
  • Mechanical Aptitude:Strong manual dexterity and coordination required to quickly attach physical springs and structural hardware components cleanly.
  • Attention to Detail:A sharp eye for physical layout variations, seam tracking deviations, and surface defects on raw and finished metals.
  • Blueprint Literacy:Capable of interpreting simple blueprints, standard operating procedures (SOPs), and bill-of-materials routing sheets.
Physical Demands & Environmental Working Conditions
  • Ability to stand, bend, lean, and move efficiently around automated cells for the duration of an 8 to 12-hour factory shift.
  • Capability to lift, push, pull, or carry raw inventory and heavy final assemblies weighing up to 50 lbs on a regular basis.
  • Comfortable working in a dynamic heavy manufacturing environment characterized by high-heat automated arcs, ambient dust, flashes, and industrial ambient noise levels.

1st Shift: 4:00am-12:30pm
2nd Shift: 12:00pm-8:30pm

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Weld Robot Operator
Weld Robot Operator

BettsHD • Fresno (CA)

On-site
USD 30,000 - 47,000
Robotic Welder 2nd Shift
Robotic Welder 2nd Shift

H O Bostrom • Waukesha (WI)

On-site
USD 30,000 - 41,000
OPERATOR - ROBOT WELD
OPERATOR - ROBOT WELD

Diamond C Trailers • Mount Pleasant (TX)

On-site
USD 25,000 - 39,000
Robotic Welder: Precision Fabrication Specialist
Robotic Welder: Precision Fabrication Specialist

Mobile Track Solutions, L.L.C. • Iowa

Hybrid
USD 25,000 - 39,000
Robotic Welder 2nd Shift
Robotic Welder 2nd Shift

H.O. Bostrom Company • Waukesha (WI)

On-site
USD 38,000 - 65,000
Robotic Welders - 2nd Shift
Robotic Welders - 2nd Shift

Metalcraft of Mayville, Inc. • Wisconsin

Hybrid
USD 30,000 - 41,000
Signing bonus $1000
Paid holidays, vacation & birthday
Air conditioned facility
+4
Robotic Welding Operator
Robotic Welding Operator

Steele Solutions Inc. • Waupaca (WI)

On-site
USD 42,000 - 66,000
Robotic Welder 2nd Shift
Robotic Welder 2nd Shift

H O Bostrom • Waukesha (WI)

On-site
USD 32,000 - 40,000
Robotic Weld Operator - 1st Shift
Robotic Weld Operator - 1st Shift

Modineer Company • Saint Joseph (MI)

On-site
USD 23,000 - 28,000
FANUC Weld Robot Operator & Assembly Technician
FANUC Weld Robot Operator & Assembly Technician

BettsHD • Fresno (CA)

On-site
USD 30,000 - 47,000