WEDM Machinist 2

Kamatics Corporation

Tempe (AZ)

Presencial

USD 55.000 - 75.000

Jornada completa

14 días+

Consigue una respuesta de este empleador

Tu currículum y tu carta de presentación, adaptados exactamente a lo que buscan contratar.

Supera los filtros ATS

Descripción de la vacante

Micro-Tronics, Inc. in Tempe, AZ, seeks an experienced WEDM Machinist II to set up and operate EDM equipment and to produce high-precision aerospace components. The role focuses on quality, safety, and continuous improvement within a 2nd shift (2:30 PM–1:00 AM, Mon–Thu).

Qualified candidates will have 4+ years in machining with EDM experience, blueprints/GD&T proficiency, and CAD/CAM exposure. This full-time, non-exempt position emphasizes teamwork with Quality, Engineering, and Production.

Formación

  • Minimum 4 years’ work experience, trade school, vocational education or apprenticeship required.
  • Minimum 2 years’ experience in EDM machining.
  • Practical experience with conventional machining, desirable.
  • Ability to use manual inspection tools required.
  • Practical application of machine shop mathematics.
  • Exposure to basic CAD/CAM, desirable.
  • Experience in WEDM and Small Hole, desirable.

Responsabilidades

  • Set up and operate EDM equipment (including Wire EDM and/or Small Hole, if applicable)
  • Manufacture electrodes and fixtures to support machining processes
  • Interpret blueprints and GD&T to ensure accurate part production
  • Perform in‑process inspections using precision measuring tools
  • Troubleshoot non‑conformances and adjust tooling or machine controls as needed
  • Apply knowledge of machine capabilities to optimize processes
  • Record production data including setup/run times and part quantities
  • Complete preventive maintenance tasks and maintain equipment performance
  • Recommend tooling and fixture improvements
  • Deburr, clean, and package finished parts
  • Maintain a safe, clean, and organized work environment (5S standards)
  • Collaborate with Quality, Engineering, and Production teams to resolve issues.

Conocimientos

EDM machining
Blueprints & GD&T
Manual inspection tools
Machine shop mathematics
Troubleshooting

Educación

High School diploma or GED
Trade school / apprenticeship
College coursework (desirable)

Herramientas

Wire EDM
Small Hole EDM
CAD/CAM (basic)

Descripción del empleo

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

WEDM Machinist 2

Full Time Micro-Tronics INC, Tempe, AZ, US

4 days ago Requisition ID: 2064

WEDM Machinist II
Micro-Tronics, Inc. | Tempe, AZ

Full-Time | Non-Exempt
2 nd Shift: 2:30 PM to 1:00 AM, Monday through Thursday

About Micro-Tronics

Micro-Tronics, Inc. is a precision aerospace manufacturing company committed to operational excellence, quality, and continuous improvement. We are seeking an experienced and motivated EDM Machinist II to join our manufacturing team. This position plays a key role in producing complex, high-precision aerospace components while supporting safety, quality, and operational excellence throughout the manufacturing process.

Position Summary

The WEDM Machinist II is responsible for setting up and operating Electrical Discharge Machines (EDM) to support secondary operations and manufacture complex precision components. This position requires hands‑on experience with EDM machining, a solid understanding of blueprints and GD&T, and the ability to troubleshoot and maintain quality in a production environment. The WEDM Machinist II will play a key role in supporting operational excellence through quality, efficiency, and continuous improvement.

Key Responsibilities
  • Set up and operate EDM equipment (including Wire EDM and/or Small Hole, if applicable)
  • Manufacture electrodes and fixtures to support machining processes
  • Interpret blueprints and GD&T to ensure accurate part production
  • Perform in‑process inspections using precision measuring tools
  • Troubleshoot non‑conformances and adjust tooling or machine controls as needed
  • Apply knowledge of machine capabilities to optimize processes
  • Record production data including setup/run times and part quantities
  • Complete preventive maintenance tasks and maintain equipment performanceRecommend tooling and fixture improvements
  • Deburr, clean, and package finished parts
  • Maintain a safe, clean, and organized work environment (5S standards)
  • Collaborate with Quality, Engineering, and Production teams to resolve issues.
Qualifications

Experience and Training Requirements:

  • Minimum 4 years’ work experience, trade school, vocational education or apprenticeship required.
  • Minimum 2 years’ experience in EDM machining.
  • Practical experience with conventional machining, desirable.
  • Ability to use manual inspection tools required.
  • Practical application of machine shop mathematics.
  • Exposure to basic CAD/CAM, desirable.
  • Experience in WEDM and Small Hole, desirable.

Education, Licenses and Certifications:

  • High School diploma, or GED required.
  • Trade school, vocational education, or 4-year apprenticeship with 3 years of work experience acceptable, in lieu of a high school diploma or GED.
  • College coursework, desirable.
Physical Requirements
  • Ability to stand and/or walk for extended periods
  • Perform repetitive hand and wrist motions
  • Ability to lift up to 25 pounds
  • Safely use hand tools
Our Values
  • Being Accountable– Taking ownership of responsibilities, following through on commitments, acting with integrity, and producing quality results.
  • Being Collaborative– Working respectfully and effectively with others, sharing knowledge, communicating openly, and contributing to team success.
  • Being Empowered– Demonstrating initiative, solving problems proactively, embracing continuous improvement, and making informed decisions within the scope of the position.

At Micro-Tronics Inc., we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short- and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work.

Micro-Tronics is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources.

This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a “U.S. person” as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

WEDM Machinist 2
WEDM Machinist 2

Kaman Corporation • Tempe (AZ)

Híbrido
USD 55.000 - 75.000
EDM Machinist 2
EDM Machinist 2

Micro--tronic • Tempe (AZ)

Presencial
USD 52.000 - 66.000
Medical insurance
Dental insurance
Vision insurance
+6
EDM Machinist 2
EDM Machinist 2

Kamatics Corporation • Tempe (AZ)

Presencial
USD 55.000 - 75.000
Medical insurance
Dental insurance
Vision insurance
EDM Machinist 2
EDM Machinist 2

Kaman Corporation • Tempe (AZ)

Híbrido
USD 60.000 - 80.000
Medical, dental, vision benefits
Retirement savings and matching
Disability and life insurance
EDM Machinist II
EDM Machinist II

Micro-Tronics, Inc. • Tempe (AZ)

Presencial
USD 55.000 - 75.000
EDM Machinist I
EDM Machinist I

Micro-Tronics, Inc. • Tempe (AZ)

Presencial
USD 30.000 - 39.000
EDM Machinist I
EDM Machinist I

Kamatics Corporation • Tempe (AZ)

Presencial
USD 42.000 - 54.000
EDM Machinist I
EDM Machinist I

RUBBERCRAFT CORP OF CALIFORNIA LTD • Tempe (AZ)

Presencial
USD 42.000 - 66.000
Medical insurance
Dental insurance
Vision insurance
+4
EDM Machinist I
EDM Machinist I

Kaman Corporation • Tempe (AZ)

Híbrido
USD 42.000 - 62.000
Medical Insurance
Dental Insurance
Vision Insurance
+3
Machinist 2 (CNC)
Machinist 2 (CNC)

Kamatics Corporation • Tempe (AZ)

Presencial
USD 60.000 - 86.000
Medical coverage
Dental coverage
Vision coverage
+1