USA - Electrical Supervisor

Epsilon-Industries-; Alabama; On-site; USD 85,000 - 115,000; Full time

Job summary

Epsilon-Industries- seeks an Electrical Supervisor to lead electrical assembly, wiring, testing, and commissioning of modular systems and control panels at our Tuscaloosa, Alabama site. You will supervise technicians, coordinate labor, materials, safety, and production to meet schedules and budgets, while ensuring compliance with engineering drawings and customer specifications.

You will mentor and develop staff, enforce safety, and collaborate with Engineering, Quality, Project Management, and

Qualifications

• High School Diploma or equivalent required.
• Electrical apprenticeship, technical training, associate degree, or equivalent experience preferred.
• Minimum of 5+ years of industrial, manufacturing, controls, or modular-construction electrical experience required.
• Journeyman Electrician license or equivalent preferred where applicable.
• Strong knowledge of NEC and NFPA requirements.
• Ability to interpret electrical drawings and schematics.
• Experience with testing equipment and commissioning procedures.

Responsibilities

• Direct daily work of Electrical Technicians, Panel Builders, PLC and Instrumentation Technicians.
• Allocate labor and establish priorities based on schedules and material availability.
• Monitor fabrication, wiring, testing, inspection, and commissioning activities.
• Track labor hours and project progress against budgets.
• Coordinate with Engineering, Production, Quality, PM, Safety, and Supply Chain.
• Lead safety meetings and employee training; ensure safe work practices.

Skills

Electrical Production Leadership

Employee Supervision

Electrical Safety

Quality and Code Compliance

Production Planning

Testing and Commissioning

Technical Troubleshooting

Labor and Schedule Management

Communication

Problem-Solving

Teamwork

Accountability

Continuous Improvement

Education

High School Diploma or equivalent

Electrical apprenticeship/technical training/associate degree or equivalent experience

5+ years of industrial electrical experience

Journeyman Electrician license preferred where applicable

Tools

Microsoft Outlook

Microsoft Word

Microsoft Excel

Genius ERP

Job description

Job: Electrical Supervisor

Reports to: Electrical Engineering and Operations Manager

Job Summary:

The Electrical Supervisor leads the electrical assembly, wiring, testing, and commissioning of modular systems, prefabricated equipment, control panels, switchgear, electrical skids, process systems, and other off-site constructed products.

This position supervises electrical personnel and coordinates labor, materials, safety, quality, and production activities to ensure projects are completed on schedule, within budget, and in accordance with engineering drawings, customer specifications, company standards, and applicable electrical codes.

This is a fully on-site position located in Tuscaloosa, Alabama.

Job Duties & Responsibilities:

• Production & Project Execution
• Direct the daily work of Electrical Technicians, Panel Builders, PLC and Instrumentation Technicians, Electrical Apprentices, and contract electrical labor.
• Assign labor and establish priorities based on production schedules, project milestones, employee qualifications, and material availability.
• Monitor electrical fabrication, assembly, wiring, testing, inspection, commissioning, and final completion.
• Track labor hours, productivity, project progress, and schedule performance against established budgets.
• Identify and resolve production bottlenecks, technical concerns, material shortages, and scheduling issues.
• Coordinate electrical activities with Engineering, Production, Quality, Project Management, Safety, and Supply Chain.
• Provide labor forecasts, completion estimates, project updates, and risk information to management.
• Ensure electrical systems are complete, properly documented, and ready for inspection, testing, or shipment.
• Personnel Leadership
• Supervise, train, coach, and develop assigned electrical employees.
• Establish expectations for safety, quality, productivity, attendance, workmanship, and conduct.
• Monitor employee performance and provide timely instruction and feedback.
• Conduct safety meetings, toolbox talks, and employee training.
• Assist with hiring, onboarding, performance evaluations, workforce planning, and corrective action as assigned.
• Review employee time, labor coding, overtime, attendance, and time-off requests within assigned authority.
• Identify employee training needs and support cross-training and skills development.
• Promote teamwork, accountability, continuous improvement, and operational excellence.
• Electrical Quality & Compliance
• Ensure electrical work complies with:
• National Electrical Code (“NEC”)
• Applicable National Fire Protection Association (“NFPA”) requirements
• ETL requirements
• Approved engineering drawings
• Company standards
• Customer specifications
• Review electrical drawings, schematics, one-line diagrams, wiring diagrams, and panel layouts.
• Verify proper installation, labeling, termination, grounding, bonding, torqueing, and workmanship.
• Conduct or coordinate in-process and final electrical inspections.
• Manage electrical punch lists, nonconformances, rework, and corrective actions.
• Collaborate with Quality Assurance regarding inspections, deficiencies, and customer requirements.
• Ensure only current and approved drawings are used for production.
• Engineering Coordination
• Serve as a liaison between Electrical Manufacturing and Engineering.
• Review drawings and identify constructability, material, installation, safety, or testing concerns.
• Coordinate the implementation of approved engineering changes.
• Support troubleshooting of design, controls, wiring, and installation problems.
• Provide manufacturing feedback to improve future designs and installation efficiency.
• Participate in project kickoff meetings, design reviews, and lessons-learned meetings.
• Support the preparation of redline drawings and as-built information.
• Safety Management
• Enforce company safety policies, procedures, and personal protective equipment requirements.
• Ensure compliance with lockout/tagout and hazardous-energy-control procedures.
• Verify employees use properly rated and inspected tools and testing equipment.
• Coordinate authorized power-up, energized testing, troubleshooting, and commissioning activities safely.
• Identify and correct unsafe conditions or work practices.
• Stop work when an unsafe condition or activity is identified.
• Report and participate in investigations of incidents, injuries, property damage, and near misses.
• Maintain safe, clean, and organized electrical work areas.
• Testing & Commissioning
• Oversee electrical testing and commissioning activities, including:
• Point-to-point verification
• Continuity testing
• Insulation-resistance testing
• Grounding and bonding verification
• Power-up procedures
• Control-system validation
• Functional testing
• Alarm and interlock verificationEnsure testing is performed by qualified personnel using approved procedures and properly rated equipment.
• Coordinate testing with Engineering, Quality, Project Management, customers, and inspectors.
• Ensure testing deficiencies are documented, corrected, and retested.
• Verify test results and commissioning documents are complete and accurate.
• Participate in factory acceptance tests (“FATs”) and customer inspections.
• Approve or recommend completed systems for final inspection and shipment within assigned authority.
• Materials, Tools & Equipment
• Coordinate electrical material requirements with Purchasing and Supply Chain.
• Monitor material availability and communicate shortages, damage, or delivery risks.
• Ensure electrical materials are properly identified, stored, protected, and used.
• Manage electrical tools, testing equipment, and related production resources.
• Ensure tools and test instruments are properly inspected, maintained, and calibrated when required.
• Promote efficient material usage and minimize shortages, excess inventory, damage, and waste.
• Management of Direct Reports
• The Electrical Supervisor may supervise:
• Industrial Electrical Technicians
• Panel Builders
• PLC and Instrumentation Technicians
• Electrical Apprentices
• Contract Electrical Labor
• Other assigned electrical‑production personnel
• Key Performance Indicators:
• Performance may be measured using:
• Safety performance
• On-time project delivery
• Schedule adherence
• Labor productivity
• Budget compliance
• Quality defects and rework
• Customer acceptance rates
• Testing and punch-list completion
• Employee attendance and retention
• Training completion

Job Qualifications:

Education & Experience

• High School Diploma or equivalent required.
• Electrical apprenticeship, technical training, associate degree, or equivalent relevant experience preferred.
• Minimum of 5+ years of industrial, manufacturing, commercial, controls, or modular-construction electrical experience required.
• Previous lead, foreperson, supervisory, or work-coordination experience preferred.
• Experience with electrical assembly, panel building, wiring, testing, troubleshooting, and commissioning required.
• Journeyman Electrician license or equivalent electrical qualification preferred where applicable.

Technical Qualifications

• Strong knowledge of industrial electrical installation, wiring, testing, and troubleshooting.
• Working knowledge of the NEC and applicable NFPA requirements.
• Ability to interpret electrical drawings, schematics, one-line diagrams, wiring diagrams, panel layouts, and technical specifications.
• Knowledge of control panels, switchgear, motor controls, transformers, variable-frequency drives, instrumentation, and PLC systems.
• Experience with electrical testing equipment and commissioning procedures.
• Knowledge of electrical safety, lockout/tagout, and hazardous-energy-control requirements.
• Ability to estimate labor needs and monitor productivity, budgets, and schedules.
• Basic proficiency in Microsoft Outlook, Word, Excel, and Teams.
• Ability to learn and use Genius ERP and other company systems.

Professional Skills

• Strong leadership, employee-development, and work-coordination abilities.
• Strong commitment to safety, quality, productivity, and customer satisfaction.
• Effective technical troubleshooting and problem-solving skills.
• Ability to manage multiple projects, deadlines, and changing priorities.
• Effective verbal and written communication skills.
• Ability to work collaboratively across departments.
• Strong planning, organization, documentation, and follow-through skills.
• Ability to exercise sound judgment and maintain confidentiality.
• Ability to attend work regularly and dependably.

Preferred Qualifications

• Seven or more years of relevant electrical experience.
• Three or more years of supervisory or foreperson experience.
• Experience with modular systems, control panels, switchgear, electrical skids, or process systems.
• Experience with PLCs, instrumentation, industrial controls, FATs, and commissioning.
• Familiarity with ETL or comparable certification requirements.
• Journeyman or Master Electrician license.
• OSHA 30-Hour certification.
• NFPA 70E training.
• First Aid and CPR certification.

Core Competencies:

• Electrical Production Leadership
• Employee Supervision
• Electrical Safety
• Quality and Code Compliance
• Production Planning
• Testing and Commissioning
• Technical Troubleshooting
• Labor and Schedule Management
• Communication
• Problem-Solving
• Teamwork
• Accountability
• Continuous Improvement

Contacts:

• Internal Electrical Engineering and Operations Manager, Engineering, Production, Project Management, Quality, Safety, Supply Chain, Purchasing, Warehouse, Human Resources, and other company personnel.
• External customers, inspectors, certification representatives, contractors, suppliers, and commissioning personnel.

Effort (Physical & Sensory):

• Regular standing, walking, bending, reaching, climbing, and use of fine motor skills.
• Ability to work from ladders, platforms, and lifts when trained and authorized.
• Ability to lift and carry tools, equipment, or materials weighing up to 50 pounds.
• Ability to distinguish colors used for electrical wiring and component identification.
• Ability to read electrical drawings, labels, test instruments, and computer displays.
• Ability to wear required personal protective equipment.
• Ability to work safely around active production and electrical-testing activities.

Working Conditions:

• Work is performed primarily in manufacturing, assembly, testing, warehouse, yard, and construction environments.
• Fully on-site position in Tuscaloosa, Alabama.
• Regular exposure to noise, dust, machinery, moving equipment, electrical equipment, and varying temperatures.
• Required use of personal protective equipment in designated areas.
• Occasional travel may be required.
• Overtime, alternate shifts, or weekend work may be required based on production and project needs.