U103 NDT Inspector A

0090 CORP-Corporate Office

United States

On-site

USD 65,000 - 90,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Northrop Grumman is seeking a Level II NDT Inspector to perform non-destructive testing and inspections on a broad range of parts, assemblies, and materials. You will monitor processes, ensure conformance to customer and Northrop Grumman specifications, and support multiple NDT methods in a manufacturing environment.

The role requires use of VT, MT, PT techniques; ability to read engineering drawings; experience with measuring devices; and a willingness to work in a union environment in the

Qualifications

  • High School Diploma or GED.
  • Minimum of 2 years as a Level II inspector in Visual Testing (VT), Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT).
  • Able to lift up to 50 pounds.
  • US citizenship is required.
  • Experience with Microsoft Office (Excel, Word, Outlook, Power Point).
  • Experience reading and interpreting engineering drawings.
  • Experience working with Military Standards and Process Specifications.
  • Experience with SAP (Systems, Applications, and Products in Data Processing).
  • Experience utilizing measuring devices including comparators, micrometers, scales, and calipers.
  • Certifications in other NDT methods.

Responsibilities

  • Inspect components, assemblies, tooling, weldments and materials of various geometric configurations and processes as specified and randomly for compliance with established customer and NG specifications and standards.
  • Perform various non-destructive tests on a wide variety of metallic and non-metallic materials to determine quality and soundness of material being inspected utilizing Visual Testing (VT), Magnetic Particle Testing (MT) and Liquid Penetrant Testing (PT) testing and other NDT methods and equipment.
  • May setup and use measuring equipment including optical tooling, Dr. Hoflar and MAAG Gear inspection equipment, etc., where procedures and techniques are not normally established. Apply analytical evaluation methods and calculations involving complex triangulation, compound angles, etc., as necessary, throughout the inspection cycle. Analyze and evaluate actual dimensions and functional test results to verify conformance with established specifications and standards. May use Coordinate Measuring Machine for inspection if there is a proven and released program that is labeled as such. W15 can also debug motion programs for offline programmers, if required, under the supervision of QC management or W17.
  • Advise Quality Assurance, Manufacturing, Production, Purchasing and Supplier personnel of quality problems and conditions, and assist in preventing the recurrence of defects by performing appropriate follow-up, inspection and evaluation activities.
  • Troubleshoot, disassemble, and repair various types of nondestructive equipment.
  • Must be able to lift up to 50 lbs.
  • May perform similar or lower classified work as required.

Skills

Microsoft Office
Reading drawings
US citizenship required

Education

High School Diploma or GED

Tools

SAP
Measuring devices (calipers, micrometers, scales)
Coordinate Measuring Machine

Job description

Relocation Assistance

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE REQUIRED FOR START: No CLEARANCE TYPE: None TRAVEL: Yes, 10% of the Time

Description

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.

Primary Function

Perform NDT inspections of standard and routine parts, processes and purchased materials to determine compliance with the specifications, standards and codes. Monitor the manufacturing processes and operations. Conduct various types of inspections/tests on a broad range of complicated fabrications, subassemblies, assemblies and tools to assure compliance with customer and NG specifications and standards where inspection/test setups, techniques and procedures are not normally established.

Working Procedure

The FOLLOWING ARE THE USUAL MAJOR JOB DUTIES BUT THIS DESCRIPTION DOES NOT PRECLUDE THE PERFORMANCE OF OTHER DUTIES BY THE INCUMBENT, NOR THE QUESTION BEING RAISED ON THE PROPER RATE FOR THE ASSIGNMENT.

  1. Inspect components, assemblies, tooling, weldments and materials of various geometric configurations and processes as specified and randomly for compliance with established customer and NG specifications and standards. Identify and tag defective parts, materials and incorrect processes with appropriate inspection documentation.
  2. Perform various non-destructive tests on a wide variety of metallic and non-metallic materials to determine quality and soundness of material being inspected utilizing Visual Testing (VT), Magnetic Particle Testing (MT) and Liquid Penetrant Testing (PT) testing and other NDT methods and equipment.
  3. May setup and use measuring equipment including optical tooling, Dr. Hoflar and MAAG Gear inspection equipment, etc., where procedures and techniques are not normally established. Apply analytical evaluation methods and calculations involving complex triangulation, compound angles, etc., as necessary, throughout the inspection cycle. Analyze and evaluate actual dimensions and functional test results to verify conformance with established specifications and standards. May use Coordinate Measuring Machine for inspection if there is a proven and released program that is labeled as such. W15 can also debug motion programs for offline programmers, if required, under the supervision of QC management or W17.
  4. Advise Quality Assurance, Manufacturing, Production, Purchasing and Supplier personnel of quality problems and conditions, and assist in preventing the recurrence of defects by performing appropriate follow-up, inspection and evaluation activities.
  5. Troubleshoot, disassemble, and repair various types of nondestructive equipment.
  6. Must be able to lift up to 50 lbs.
  7. May perform similar or lower classified work as required.

This is a Union represented position.

Basic Qualifications
  • High School Diploma or equivalent GED.
  • Minimum of 2 years as a Level II inspector in Visual Testing (VT), Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT).
  • Able to lift up to 50 pounds.
  • US citizenship is required.
Preferred Qualifications
  • Experience with Microsoft Office (Excel, Word, Outlook, Power Point).
  • Experience reading and interpreting engineering drawings.
  • Experience working with Military Standards and Process Specifications.
  • Experience with SAP (Systems, Applications, and Products in Data Processing).
  • Experience utilizing measuring devices including comparators, micrometers, scales, and calipers.
  • Certifications in other NDT methods.

The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.

Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO.

U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

We are a pioneering company. With careers across all areas: air, cyber, land, sea and space - our 90,000 employees work as one to defend and define the future. Northrop Grumman careers and internships are as varied as your interests, with a lifetime of potential that will give you every opportunity to do your best work. Working together with people from many backgrounds, personal passions and disciplines, we share a drive to push the boundaries of science, technology and engineering to meet the ever evolving needs of our customers worldwide.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

U103 NDT Inspector A
U103 NDT Inspector A

Northrop Grumman • Sunnyvale (CA)

On-site
USD 70,000 - 95,000
Non-Destructive Testing (NDT) Engineer 3
Non-Destructive Testing (NDT) Engineer 3

Northrop Grumman • United States

On-site
USD 89,000 - 134,000
U103 Inspector C
U103 Inspector C

Northrop Grumman • Sunnyvale (CA)

On-site
USD 42,000 - 65,000
Union representation
NDT Engineer – Level 3 or Level 4
NDT Engineer – Level 3 or Level 4

Northrop Grumman • Corinne (UT)

On-site
USD 89,000 - 168,000
Non Destructive Test Engineer
Non Destructive Test Engineer

Northrop Grumman • United States

On-site
USD 76,000 - 114,000
Health insurance
Life and disability insurance
Savings plan
+2
Non-Destructive Testing (NDT) Engineer 3
Non-Destructive Testing (NDT) Engineer 3

Northrop Grumman • Clearfield (UT)

On-site
USD 89,000 - 134,000
Total Rewards
Health insurance
Holidays & PTO
Non Destructive Test Engineer
Non Destructive Test Engineer

Northrop Grumman • Beavercreek (OH)

On-site
USD 76,000 - 114,000
Relocation assistance may be available
Overtime opportunities
U103 Inspector C
U103 Inspector C

Northrop Grumman • Sunnyvale (CA)

On-site
USD 65,000 - 85,000
U103 Inspector B
U103 Inspector B

Northrop Grumman • Sunnyvale (CA)

On-site
USD 65,000 - 95,000
U107 Inspector B Assembly - 2nd Shift
U107 Inspector B Assembly - 2nd Shift

0090 CORP-Corporate Office • United States

On-site
USD 40,000 - 65,000