Tool & Die Machinist

Silgan Dispensing Systems; Grandview (MO); On-site; USD 55,000 - 75,000; Full time

Benefits offered by this job

Equal Opportunity Employer

Drug-free workplace

Job summary

Silgan Dispensing Systems in Missouri seeks a skilled machinist to analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble dies, jigs, fixtures, gauges, and related tooling to fabricate and repair parts.

You will read blueprints, measure stock, verify tolerances to tight specifications, heat-treat, and assemble components while following safety policies and environmental guidelines.

Qualifications

• Requires four-year apprenticeship or equivalent plus four or more years of experience in construction, alteration or repair of complicated tools, dies, molds and gauges.
• Experience with machining tools and dies to meet exact standards.
• Ability to read and interpret technical descriptions and drawings.

Responsibilities

• Studies specifications such as blueprints, sketches, models, or descriptions, and visualizes product to determine materials required and machines to be used to fabricate parts.
• Computes dimensions, plans layout, and determines assembly method and sequence.
• Measures, marks, and scribes metal stock for machining.
• Sets up and operates machine tools such as lathes, milling machine, EDM, Pantograph, and grinder, to machine parts, and verifies conformance of machined parts to specifications.
• Lifts machined parts and positions and secures parts on surface plate or worktable.

Education

Four-year apprenticeship or equivalent plus four years or more of experience in the construction, alteration or repair of complicated tools, dies, molds and gauges to meet standards

Tools

Lathes

Milling machine

EDM

Pantograph

Grinder

Job description

SUMMARY

Analyzes specifications, lays out metal stock, sets up and operates machine tools, and fits and assembles parts to fabricate and repair metalworking dies, cutting tools, jigs and fixtures, gauges, and machinists' hand tools by performing the following duties.

All employees are expected to act in a safe manner at all times and ensure that those around them do not put themselves or others at risk. Everyone is personally accountable for his/her own safety as well as their co-workers. Safety and health is a shared responsibility of everyone in the organization and a condition of employment. We value and expect engagement out of all employees. Co-workers share the responsibility for doing the right thing for the environment and carrying out the stewardship principles addressed in our Environmental Policy. We will provide the resources necessary to implement this policy, and management will conduct periodic reviews to ensure its ongoing effectiveness.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Studies specifications such as blueprints, sketches, models, or descriptions, and visualizes product to determine materials required and machines to be used to fabricate parts.
• Computes dimensions, plans layout, and determines assembly method and sequence of operations.
• Measures, marks, and scribes metal stock for machining.
• Sets up and operates machine tools such as lathes, milling machine, EDM, Pantograph, and grinder, to machine parts, and verifies conformance of machined parts to specifications.
• Lifts machined parts and positions and secures parts on surface plate or worktable.
• Smoothes flat and contoured surfaces and power grinders, and fits and assembles parts together and into assemblies and mechanisms.
• Verifies dimensions, alignments, and clearances.
• Heat‑treats tools or parts.
• Connects wiring and hydraulic lines to install electrical and hydraulic components.
• Examines standard or previously used dies, tools, and jigs and fixtures, and recommends design modifications regarding construction and function of part.
• Develops specifications from general descriptions for specialty tools and draws or sketches design of product.
• Plans and constructs intricate tools, dies, fixtures, molds, and gauges where accurate relationship, fitting, interchangeability of parts require extremely close tolerances to fits.
• Constructs tools where no design is available, determines metal flow in dies, selects allowances, performs difficult development work, and makes tool tryouts.
• Fits and assembles parts involving irregular contours, large number of holes or numerous die sections.
• Works to extremely close tolerances, often within .0001".
• Cleans all plates and cavities/cores and moving parts of mold with Dyna-clean.
• Repairs parts of mold that are defective.
• Fit up cores, cavities, ejector pins and moving parts within .0005 clearance.
• Finish parts to print dimensions.
• Makes new parts for molds according to print plus grinds stock before heat‑treating.
• Heat treats parts to specifications per print.
• Drills out water lines.
• Drills and counter bores for water lines.
• Makes holding fixtures and gauges for grinding and/or machining or other departments.
• Figures stack‑up dimension of parts.
• Plugs and bores gauge hole diameters.
• Trig angles for grinding and machining.
• Indicates parts on shop equipment.
• Must follow all rules and policies.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

One to three months related experience and/or training Requires four-year apprenticeship or its equivalent plus four years or more of experience in the construction, alteration or repair of complicated tools, dies, molds and gauges to meet standards.

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence and effectively present information in one-on-one and small group situations to other employees of the organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percentage.

REASONING ABILITY

Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to handle problems involving several concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand, walk, talk and hear. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and sit, bend, stoop, twist, kneel, squat, or crawl. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 58 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to risk of electrical shock. The employee is frequently exposed to vibration. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.

LIMITATIONS AND DISCLAIMER

The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job‑related instructions and to perform other job‑related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an “at‑walk” basis.

Silgan is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, colour, religion, sex, national origin, age, marital status, or the presence of a disability, which would not prevent the performance of essential job duties with, or without reasonable accommodation of any other protective status. Silgan is a drug‑free workplace.

Silgan Dispensing creates dispensing solutions for some of the world’s most iconic brands—from triggers and pumps to sprayers and closures. When you join our team, you become part of a global community where your unique perspectives help shape our future. You’ll have the opportunity to be hands‑on, get directly involved in meaningful work, and make a tangible impact from day one.