Test Engineer III - HBR MC

Blue Origin; Longmont (CO); On-site; USD 111,000 - 155,000; Full time

Benefits offered by this job

Medical, dental, vision

Stock options

Paid time off

Education Support Program

Job summary

Blue Origin, via Honeybee Robotics in Colorado, seeks a test engineer to develop and execute automated test solutions for electromechanical hardware used in precision mechanisms for space programs.

You will design EGSE/ATE, develop test software in Python/LabVIEW/C++, and analyze real-time data while collaborating with design, systems, and quality teams. U.S. citizenship or equivalent is required; relocation and up to 10% travel may be available.

Qualifications

• Bachelor’s degree in electrical, mechatronics, mechanical, controls, aerospace engineering, or closely related technical discipline.
• Minimum of 5 years of relevant experience or equivalent combination of education and hands-on experience.
• Experience developing automated test sequences, test software, or data-analysis tools in Python, LabVIEW, C++, C#, or MATLAB.
• Hands-on experience building and operating EGSE, ATE, or comparable test systems for electrical or electromechanical hardware.
• Experience with data-acquisition systems and instrumentation (load cells, torque sensors, encoders, thermocouples, current/voltage, accelerometers).
• Ability to read and troubleshoot electrical schematics, wiring diagrams, and interface-control documents.
• Demonstrated ability to interpret test data, identify anomalies, and drive resolution using a structured approach.
• Clear technical writing and cross-functional collaboration skills.
• U.S. citizen or eligible for U.S. employment (citizenship/residency requirements).

Responsibilities

• Develop test software and automated test sequences using Python or LabVIEW to command EGSE, coordinate test execution, collect data in real time, and report results.
• Design, develop, and validate EGSE providing electrical interfaces to power, command, stimulate, and measure units under test.
• Configure and operate test fixtures, GSE, and data-acquisition systems for electromechanical system testing.
• Collaborate with design, systems, and quality engineers to derive, allocate, and verify test requirements.
• Support Test Readiness Reviews, anomaly investigations, and Failure Review Boards.
• Perform additional duties to support evolving program, test, and business priorities.

Job description

At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We’re working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! As a member of the Blue Origin family of companies, Honeybee Robotics has been at the forefront of robotics for over 40 years. Our Colorado location specializes in creating advanced motion control solutions for NASA, defense, and commercial programs. Our work has played a critical role in thousands of projects, spanning from conceptual design studies to flight missions, including NASA's Artemis I Mission and the Roman Space Telescope. We are seeking technically brilliant individuals who are passionate about their work, thrive in collaborative environments, and have a laser focus on the details that drive excellence.

Blue Origin is developing TeraWave, a revolutionary multi-orbit satellite communications network designed to deliver symmetrical data speeds of up to 6 Tbps anywhere on Earth. Its constellation of thousands of optically interconnected satellites relies on precise, reliable mechanisms that keep each satellite positioned, stable, and communicating. Within Honeybee Robotics, a Blue Origin company, the Motion Control business unit designs, manufactures, and tests high-performance actuators, gearboxes, motors, motor-drive electronics, and integrated motion-control systems. In this role, you will support TeraWave by developing and executing test solutions for the electromechanical hardware used in its precision mechanisms. You will own the test effort, from requirements and test-system design through execution, data review, and anomaly closure. This includes designing Electrical Ground Support Equipment (EGSE) and automated test equipment (ATE), integrating instrumentation and data-acquisition systems, developing test software, operating hardware in the lab, and troubleshooting across electrical, mechanical, and software boundaries. Candidates from aerospace, robotics, automotive, medical device, industrial automation, or other high-reliability hardware environments may be a strong fit if they have built and operated test systems for comparable electromechanical hardware.

Responsibilities

• Develop test software and automated test sequences using environments such as Python or LabVIEW to command EGSE, coordinate test execution, monitor and collect measurement data in real time, and analyze and report the results.
• Design, develop, and validate Electrical Ground Support Equipment (EGSE) that provides the electrical interfaces needed to power, command, stimulate, and measure the units under test.
• Design, configure, and operate test fixtures, ground support equipment (GSE), and data-acquisition systems for electromechanical system testing.
• Collaborate with design, systems, and quality engineers to ensure test requirements are properly derived, allocated, and verified.
• Support Test Readiness Reviews (TRRs), test-anomaly investigations, and Failure Review Boards (FRBs).
• Perform additional duties or projects as needed to support evolving program, test, and business priorities.

Minimum qualifications

• Bachelor’s degree in electrical, mechatronics, mechanical, controls, aerospace engineering, or a closely related technical discipline.
• A minimum of 5 years of relevant experience or an equivalent combination of education and directly relevant hands-on experience may be considered.
• Experience developing automated test sequences, test software, or data-analysis tools in at least one programming environment such as Python, LabVIEW, C++, C#, or MATLAB.
• Hands-on experience building and operating EGSE, ATE, or comparable custom test systems for electrical or electromechanical hardware.
• Experience with data-acquisition systems and instrumentation such as load cells, torque sensors, encoders, thermocouples, current/voltage measurement, or accelerometers.
• Ability to read and troubleshoot from electrical schematics, wiring diagrams, and interface-control documents.
• Demonstrated ability to interpret test data, recognize anomalies, and drive problems to resolution using a structured approach.
• Clear technical writing and communication skills and the ability to work effectively with cross-functional teams.
• Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Preferred qualifications

• Experience applying version control and sound software-development practices to test software.
• Experience testing precision motion-control hardware such as brushless DC motors, actuators, gearboxes, encoders, motor-drive electronics, slip rings, or flex harnesses.
• Experience developing test software in compliance with NASA NPR 7150.2D (NASA Software Engineering Requirements) or equivalent software assurance standards.
• Experience across development, qualification, and acceptance test campaigns, including anomaly investigation and corrective action.
• Familiarity with environmental test standards such as MIL-STD-810, GEVS (GSFC-STD-7000), or equivalent aerospace qualification standards.
• Experience with requirements-management or model-based systems-engineering tools such as DOORS or Jama.
• Experience supporting tests at external facilities or customer sites.

Special Mentions

• Relocation assistance is available.
• Travel up to 10%.
• Base Pay Range for: CO applicants is $110,938.00 - $155,312.85

Benefits

• Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program.
• Stock Options for all regular employees (working at least 20 hours/week).
• Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays.
• Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion.
• Bonus amounts and eligibility are not guaranteed and subject to change and cancellation.

Export Control Regulations

Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Background Check Required

For all positions: Blue's Standard Background Check Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation.

Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.

Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical.

Equal Employment Opportunity

Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork.

We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law.

Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws.

For more information on "Know Your Rights," please see here.

Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin’s affirmative action plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at [e-mail]. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. We’re committed to building the road to space so our children can build the future. We are a mission-driven company focused on ideas and innovation, and encourage fresh perspectives from bold voices. At Blue, our team is building the future as their unique selves.

U.S. Applicant Privacy Notice EU Applicant Privacy Notice