Test Engineer

CFS Curtiss Wright Controls Inc

Shelby (NC)

On-site

USD 80,000 - 104,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Paid Time Off
401K with Employer Match and Profit Sh
Health and Wellness Benefits
Learning and Development Opportunities
Referral Program
Competitive Pay
Employee Stock Purchase Plan
Inclusive & Supportive Culture

Job summary

Curtiss-Wright Actuation Division seeks a Test Engineer to define and execute testing for aerospace actuation products. You will create Test Plans, build fixtures, and develop SOWs for external testing, working with suppliers to ensure requirements are met.

You will also develop test/diagnostic software (LabVIEW), maintain testing schedules with PMs, and provide technical support for new proposals and production testing. A strong mechanical/electrical background is essential.

Qualifications

  • Bachelor’s degree in mechanical or electrical engineering or equivalent.
  • 1–5 years of experience (internships/co-ops considered).
  • US Citizenship required.
  • Hands-on experience with common hand tools for mechanical/electrical devices.
  • Experience with sensors such as load cells, torque cells, resolvers, encoders and data acquisition tools.
  • Ability to develop testing schedules and plans with supporting engineers and program management.
  • Ability to translate long-term program schedules into actionable tasks.
  • Ability to travel to external testing facilities; up to 20% annually, up to 50% during peak periods.
  • Experience with LabVIEW; FPGA a plus.
  • Experience testing electromechanical devices and electronics/harnesses.
  • Experience creating testing requirements, plans and procedures to verify customer requirements.
  • Experience with environmental and EMI testing per RTCA DO-160G, MIL-STD-810/461.
  • Basic 3D modeling; Siemens NX.

Responsibilities

  • Design, develop, and implement cost-effective testing methods for actuation and motor controller systems.
  • Create detailed Test Plans and Test Procedures to verify product requirements.
  • Design test fixtures and equipment; develop Statements of Work for external test equipment needs.
  • Create and maintain test/diagnostic software (LabVIEW).
  • Prepare qualification test reports and failure/resolution reports.
  • Collaborate with Project, Design, Test Technicians and Program Managers on testing execution.
  • Support existing production testing equipment and procedures.
  • Assist in building, installing, debugging and testing equipment; provide technical support for proposals.

Job description

Test Engineer

As a Test Engineer, you will determine testing needs to verify customer requirements are met. You will create, execute and report on Test Plans and Procedures. You will design and build testing equipment and develop Statements of Work to define requirements for external sources to design and build test equipment for us. Our customers are mainly military and commercial aerospace OEM’s looking for mechanical and electro-mechanical actuation solutions for flight controls, door drive systems and other needs. Our main products are rotary and linear actuators that are hydraulically or electrically driven, as well as the analog or digital motor controllers operating electro-mechanical actuation systems. Location: Shelby, NC Salary: $80,000 - $104,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in NC. Criteria such as the candidate’s qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer.

We Take Care of Our People

  • Paid Time Off
  • 401K with Employer Match and Profit Sharing
  • Health and Wellness Benefits
  • Learning and Development Opportunities
  • Referral Program
  • Competitive Pay
  • Recognition
  • Employee Stock Purchase Plan
  • Inclusive & Supportive Culture

Please note, benefits are country specific and may vary from location to location.

Your Challenge

Design, develop, and implement cost-effective methods of testing and troubleshooting actuation and motor controller systems and equipment. Create detailed Test Plans and Test Procedures to verify product requirements are met. Design or specify test fixtures and equipment. Develop Statements of Work (SOW) for new test equipment needs and support Supply Chain and Suppliers in the execution of the SOW. Develop Statements of Work (SOW) and request quotations for external qualification testing services and support Supply Chain and Suppliers in the execution of the testing. Create and maintain test and diagnostic software (most often in LabView). Create and align the detailed testing schedule within the Program Management schedule. Prepare formal qualification test reports and test failure and resolution reports to document results of testing activities. Collaborate with Project Engineers, Design Engineers, Test Technicians and Program Managers in the execution of the above. Support existing Production Testing equipment and procedures. Assists in building, installing, debugging and testing designed equipment to ensure production capabilities. Provides technical support for new business proposals.

What You Bring
  • Bachelor’s degree in mechanical or electrical engineering or equivalent
  • 1-5 years of experience (will consider relevant internships and/or co‑op experience)
  • Must be a US Citizen
  • Hands‑on experience with common hand tools for mechanical and electrical devices.
  • Experience utilizing and troubleshooting of sensors such as load cells, torque cells, resolvers, encoders and data acquisition tools.
  • Ability to take testing requirements and external proposals and develop detailed testing schedules, in collaboration with supporting engineers and program management.
  • Ability to take long‑term Program schedule and goals and break them down to manageable tasks that define a Testing Plan and Schedule.
  • Ability to travel to external testing facilities as required to lead execution of required testing.
  • Overall annual travel is up to 20% but can be up to 50% during peak testing periods.
  • Experience with LabVIEW (FGPA preferred).
  • Experience with testing electromechanical devices.
  • Experience with electronics and electrical harnesses.
  • Experience in creating testing requirements, plans and procedures to verify customer requirements.
  • Experience working with external environmental and EMI testing services to execute testing in accordance with the following specifications: RTCA DO-160G Environmental Test Procedures for Airborne Equipment MIL-STD-810 Environmental Testing MIL-STD-781 Reliability Testing MIL-STD-704 Aircraft Electric Power Characteristics EMI/EMC/ESD per RTCA DO-160G and/or MIL-STD-461 Aerospace experience (commercial and/or military).
  • Basic 3D modeling and design (we use Siemens NX)
Who We Are

Curtiss-Wright Actuation Division designs, manufactures, and supports electro‑mechanical actuation products and systems for use in demanding applications in Aerospace, Defense and Industrial Automation markets. Our market leading solutions help improve the reliability, efficiency and performance of our clients' operations and platforms, as well as reducing their environmental impact with energy efficient electro‑mechanical designs and technology. For the Aerospace market, we supply actuation systems for flight control, landing gear, utility and other applications on both commercial and military aircraft. In Ground & Naval Defense markets, we support a wide array of applications ranging from door assist, ramp and hatch actuation, weapons handling systems, radar and launch platform actuation, and robotic (AUV/ROV) actuation. To learn more, please visit us at About | Actuation Division | Curtiss-Wright (cw-actuation.com)

Compliance Statement

This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law – click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Join the WRIGHT Team!

Over 95 years of growth, Curtiss-Wright is an integrated, market-facing global diversified industrial company and remains a technology leader through this legacy of innovation. Through three well-balanced segments – Aerospace & Industrial, Defense Electronics and Naval & Power, we remain focused on advanced technologies for high performance platforms and critical applications. Diversity, commitment to excellence and dedication to the spirit of pioneering innovation continue to drive the employees of Curtiss-Wright.

Our Values

What makes a world-class organization? It all begins with core values that provide a strong foundation for success. Simple in theory, the values of Curtiss-Wright are reflected in every aspect of our operations. To our employees, these are more than words on a wall – we all take these values to heart in our relationships with our customers and each other.

Leadership

We lead based on vision and strategic direction, empowering employees to reach goals through thoughtful and decisive action.

Customer Focus

We are committed to achieving total quality by meeting our customers’ expectations and delivering products and services in a timely fashion.

Teamwork & Trust

Working in a spirit of trust and collaboration, we actively encourage employees to contribute their ideas and innovations to keep our company moving forward.

Respect for People

We believe that people are our most valuable asset and will always do the right thing in our dealings and interactions with all employees.

Integrity

We will act with the highest integrity in all of our business relationships and strategic partnerships.

What We Offer

Our Employees: Opportunity: As part of the Curtiss-Wright team, you have the opportunity each day to transform the way customers do business, as well as transform your career. Our entrepreneurial environment provides you with excellent experiences that enable you to develop your skills through stretch assignments and the opportunity to work with the best talent in the industry. You will have the opportunity to contribute from day one! Challenging Work: The work we do here is not only challenging, but it is meaningful to our customers, our employees and the communities in which they live and work. You are given the chance to work on some of the most advanced technology projects in the world. Now that something to be proud of! Collaborative Environment: The teamwork among our exceptionally talented people enables us to deliver some of the most advanced solutions to our customers.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Engineer, Integration & Test Leader, Principal
Engineer, Integration & Test Leader, Principal

CFS Curtiss Wright Controls Inc • Shelby (NC)

On-site
USD 150,000 - 170,000
Paid Time Off
401K with Employer Match and Profit–Sh
Health and Wellness Benefits
+5
Lab Technician, Staff
Lab Technician, Staff

CFS Curtiss Wright Controls Inc • Shelby (NC)

On-site
USD 35,000 - 47,000
Paid Time Off
401K match
Health benefits
+6
Material Prep/Deburr
Material Prep/Deburr

CFS Curtiss Wright Controls Inc • Shelby (NC)

On-site
USD 28,000 - 36,000
Paid Time Off
401K with Employer Match and Profit<br
Health and Wellness Benefits
+6
Systems Engineer, Lead
Systems Engineer, Lead

Curtiss-Wright Corporation • Shelby (NC)

Hybrid
USD 99,000 - 143,000
Paid Time Off
401K with Employer Match and Profit Sh
Health and Wellness Benefits
+6
Material Prep, Staff
Material Prep, Staff

CFS Curtiss Wright Controls Inc • Shelby (NC)

On-site
USD 28,000 - 36,000
Paid Time Off
401K with Employer Match
Profit Sharing
+7
Structural Integrity Engineer Principal
Structural Integrity Engineer Principal

CFS Curtiss Wright Controls Inc • Shelby (NC)

On-site
USD 131,000 - 189,000
Paid Time Off
401K with Employer Match and Profit Sh
Health and Wellness Benefits
+6
Test Technician - Senior
Test Technician - Senior

AUT Curtiss Wright Controls Integrated Sensing • Village of Farmingdale (NY)

On-site
USD 39,000 - 52,000
Paid Time Off
401K with Employer Match and Profit Sh
Health and Wellness Benefits
+6
Mechanical Design Engineer, Sr
Mechanical Design Engineer, Sr

CFS Curtiss Wright Controls Inc • Shelby (NC)

Hybrid
USD 90,000 - 120,000
Paid Time Off
401K with Employer Match and Profit-Sh
Health and Wellness Benefits
+6
NDT Inspector
NDT Inspector

CFS Curtiss Wright Controls Inc • Shelby (NC)

On-site
USD 35,000 - 48,000
Paid Time Off
401K with Employer Match and Profit Sh
Health and Wellness Benefits
+6
Software Development Engineer Architect
Software Development Engineer Architect

CFS Curtiss Wright Controls Inc • Shelby (NC)

On-site
USD 130,000 - 150,000
Paid Time Off
401K with Employer Match and Profit Sh
Health and Wellness Benefits
+2