Technician - Pipeline Services

JP Services - Asset Integrity Solutions

Houston (TX)

On-site

USD 30,000 - 48,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

JP Services - Asset Integrity Solutions seeks a Field Technician – Make Ready, Rig-Up, Bolt-Up & Torquing to assist in preparing, assembling, aligning, bolting, and torquing flanged connections on pipeline projects. You will operate and maintain field equipment, ensure safety and quality, and support multiple service lines as needed.

Responsibilities include rig-up/down, flange alignment, gasket installation, and torque procedures under supervision.

Qualifications

  • Security-conscious and safety-minded on job sites.
  • Must have a valid driver’s license and physically capable of demanding work.
  • Willingness to learn company procedures and field protocols.

Responsibilities

  • Assist with rig-up/rig-down of piping systems and equipment.
  • Perform make-ready activities for flanged connections and torque-up procedures.
  • Inspect components for cleanliness and correct rating prior to installation.
  • Coordinate with Foremen and technicians to complete work according to project schedules.
  • Follow safety requirements including PPE and lockout/tagout practices.

Skills

Safety awareness
Driver's license
Willingness to learn
Stamina/physical fitness
Teamwork/communication

Tools

Hydraulic torque wrenches
Pneumatic torque tools
Manual torque wrenches

Job description

The Field Technician – Make Ready, Rig‑Up, Bolt‑Up & Torquing will assist with preparing, assembling, aligning, bolting, and torquing flanged connections on pipeline construction, fabrication, testing, and maintenance projects. This includes proper setup, operation, care, and storage of company equipment while maintaining high standards of safety and quality.

This position reports to the Foreman or Supervisor and works with field crews to execute projects safely and efficiently. The employee must be dependable, professional, self‑motivated, willing to learn, and able to work in demanding field conditions.

Provide day‑to‑day support for pipeline construction, fabrication, rig‑up, testing, cleaning, and commissioning activities. Responsibilities include but are not limited to:

Responsibilities
  • Assist with rig‑up and rig‑down of piping systems, hoses, manifolds, valves, fittings, and equipment used in pipeline operations.
  • Perform make‑ready activities, including preparing flanged connections for assembly, inspection, and testing.
  • Assist with flange alignment, gasket installation, stud and bolt placement, and bolt‑up activities.
  • Use approved torque specifications, tightening sequences, and procedures under appropriate supervision.
  • Assist with hydraulic torque wrenches, pneumatic and manual torque tools, impact wrenches, and specialized bolting equipment.
  • Inspect flange faces, gaskets, studs, nuts, and other components for cleanliness, damage, correct rating, and suitability before installation.
  • Assist in preparing systems for hydrostatic or pneumatic testing, cleaning, and commissioning.
  • Identify, organize, load, unload, inspect, and properly store company tools, materials, and equipment.
  • Coordinate with technicians, Foremen, and Supervisors to complete work safely and according to project schedules.
  • Follow company and customer safety requirements, including PPE, line‑of‑fire, pinch‑point, lifting, stored‑energy, and pressure‑safety precautions.
  • Assist with torque records, equipment inspections, job safety analyses, and other required documentation.
  • Report damaged equipment, unsafe conditions, material discrepancies, and quality concerns promptly.
  • Maintain a clean and organized work area and protect company assets.
  • Cross‑train and support other JP Services service lines, including pipeline testing and cleaning, as operational needs require.
  • Demonstrate teamwork, accountability, professionalism, and a commitment to meeting customer expectations.
  • Previous experience in pipeline construction, fabrication, rig‑up, flange bolt‑up, and hydraulic torquing is preferred.
  • Experience rigging up and assembling piping systems, hoses, manifolds, valves, and equipment for pipeline testing, cleaning, and commissioning is preferred.
  • Experience with flange alignment, gasket installation, stud and bolt installation, and proper tightening and torquing procedures is preferred.
  • Familiarity with hydraulic torque wrenches, pneumatic tools, impact wrenches, and specialized bolting equipment is a plus.
  • Ability to read basic piping drawings, identify flange sizes and pressure ratings, and understand mechanical assembly requirements is beneficial.
  • Experience in pipeline hydrostatic testing, chemical cleaning, industrial flushing, or related services is a plus.
  • Pipeline construction, industrial mechanical, pipefitting, or similar trade experience is preferred but not required.
  • Ability and willingness to learn company procedures, customer specifications, and applicable safety requirements.
  • Candidates with mechanical aptitude, hands‑on rig‑up experience, a strong work ethic, and a willingness to learn are encouraged to apply.
  • Valid driver’s license.
  • Ability to pass client‑required drug testing and background screening.
  • Ability to travel extensively throughout the United States and work in remote locations for extended periods.
  • Ability to work extended hours, weekends, holidays, and night shifts as projects require.
  • Ability to work safely with hand tools, power tools, hydraulic equipment, and heavy mechanical components.
  • Basic mechanical aptitude and ability to follow instructions, measurements, and equipment specifications.
  • Strong verbal communication skills, teamwork, and attention to detail.
  • Ability to perform physically demanding work, including lifting, bending, kneeling, climbing, and prolonged standing.
  • Ability to safely handle tools and materials using assistance or mechanical lifting equipment when required.
  • Ability to pass a fit‑for‑duty assessment consistent with job responsibilities.
  • Ability to work outdoors in hot, cold, wet, and other challenging conditions.
  • Dependable attendance, positive attitude, safety awareness, and willingness to assist across JP Services service lines.
Position Requirements
  • Assist with rig‑up and rig‑down of piping systems, hoses, manifolds, valves, fittings, and equipment used in pipeline operations.
  • Perform make‑ready activities, including preparing flanged connections for assembly, inspection, and testing.
  • Assist with flange alignment, gasket installation, stud and bolt placement, and bolt‑up activities.
  • Use approved torque specifications, tightening sequences, and procedures under appropriate supervision.
  • Assist with hydraulic torque wrenches, pneumatic and manual torque tools, impact wrenches, and specialized bolting equipment.
  • Inspect flange faces, gaskets, studs, nuts, and other components for cleanliness, damage, correct rating, and suitability before installation.
  • Assist in preparing systems for hydrostatic or pneumatic testing, cleaning, and commissioning.
  • Identify, organize, load, unload, inspect, and properly store company tools, materials, and equipment.
  • Coordinate with technicians, Foremen, and Supervisors to complete work safely and according to project schedules.
  • Follow company and customer safety requirements, including PPE, line‑of‑fire, pinch‑point, lifting, stored‑energy, and pressure‑safety precautions.
  • Assist with torque records, equipment inspections, job safety analyses, and other required documentation.
  • Report damaged equipment, unsafe conditions, material discrepancies, and quality concerns promptly.
  • Maintain a clean and organized work area and protect company assets.
  • Cross‑train and support other JP Services service lines, including pipeline testing and cleaning, as operational needs require.
  • Demonstrate teamwork, accountability, professionalism, and a commitment to meeting customer expectations.
  • Previous experience in pipeline construction, fabrication, rig‑up, flange bolt‑up, and hydraulic torquing is preferred.
  • Experience rigging up and assembling piping systems, hoses, manifolds, valves, and equipment for pipeline testing, cleaning, and commissioning is preferred.
  • Experience with flange alignment, gasket installation, stud and bolt installation, and proper tightening and torquing procedures is preferred.
  • Familiarity with hydraulic torque wrenches, pneumatic tools, impact wrenches, and specialized bolting equipment is a plus.
  • Ability to read basic piping drawings, identify flange sizes and pressure ratings, and understand mechanical assembly requirements is beneficial.
  • Experience in pipeline hydrostatic testing, chemical cleaning, industrial flushing, or related services is a plus.
  • Pipeline construction, industrial mechanical, pipefitting, or similar trade experience is preferred but not required.
  • Ability and willingness to learn company procedures, customer specifications, and applicable safety requirements.
  • Candidates with mechanical aptitude, hands‑on rig‑up experience, a strong work ethic, and a willingness to learn are encouraged to apply.
  • Valid driver’s license.
  • Ability to pass client‑required drug testing and background screening.
  • Ability to travel extensively throughout the United States and work in remote locations for extended periods.
  • Ability to work extended hours, weekends, holidays, and night shifts as projects require.
  • Ability to work safely with hand tools, power tools, hydraulic equipment, and heavy mechanical components.
  • Basic mechanical aptitude and ability to follow instructions, measurements, and equipment specifications.
  • Strong verbal communication skills, teamwork, and attention to detail.
  • Ability to perform physically demanding work, including lifting, bending, kneeling, climbing, and prolonged standing.
  • Ability to safely handle tools and materials using assistance or mechanical lifting equipment when required.
  • Ability to pass a fit‑for‑duty assessment consistent with job responsibilities.
  • Ability to work outdoors in hot, cold, wet, and other challenging conditions.
  • Dependable attendance, positive attitude, safety awareness, and willingness to assist across JP Services service lines.
Education, Certifications/Licenses, Experience
  • Assist with rig‑up and rig‑down of piping systems, hoses, manifolds, valves, fittings, and equipment used in pipeline operations.
  • Perform make‑ready activities, including preparing flanged connections for assembly, inspection, and testing.
  • Assist with flange alignment, gasket installation, stud and bolt placement, and bolt‑up activities.
  • Use approved torque specifications, tightening sequences, and procedures under appropriate supervision.
  • Assist with hydraulic torque wrenches, pneumatic and manual torque tools, impact wrenches, and specialized bolting equipment.
  • Inspect flange faces, gaskets, studs, nuts, and other components for cleanliness, damage, correct rating, and suitability before installation.
  • Assist in preparing systems for hydrostatic or pneumatic testing, cleaning, and commissioning.
  • Identify, organize, load, unload, inspect, and properly store company tools, materials, and equipment.
  • Coordinate with technicians, Foremen, and Supervisors to complete work safely and according to project schedules.
  • Follow company and customer safety requirements, including PPE, line‑of‑fire, pinch‑point, lifting, stored‑energy, and pressure‑safety precautions.
  • Assist with torque records, equipment inspections, job safety analyses, and other required documentation.
  • Report damaged equipment, unsafe conditions, material discrepancies, and quality concerns promptly.
  • Maintain a clean and organized work area and protect company assets.
  • Cross‑train and support other JP Services service lines, including pipeline testing and cleaning, as operational needs require.
  • Demonstrate teamwork, accountability, professionalism, and a commitment to meeting customer expectations.
  • Previous experience in pipeline construction, fabrication, rig‑up, flange bolt‑up, and hydraulic torquing is preferred.
  • Experience rigging up and assembling piping systems, hoses, manifolds, valves, and equipment for pipeline testing, cleaning, and commissioning is preferred.
  • Experience with flange alignment, gasket installation, stud and bolt installation, and proper tightening and torquing procedures is preferred.
  • Familiarity with hydraulic torque wrenches, pneumatic tools, impact wrenches, and specialized bolting equipment is a plus.
  • Ability to read basic piping drawings, identify flange sizes and pressure ratings, and understand mechanical assembly requirements is beneficial.
  • Experience in pipeline hydrostatic testing, chemical cleaning, industrial flushing, or related services is a plus.
  • Pipeline construction, industrial mechanical, pipefitting, or similar trade experience is preferred but not required.
  • Ability and willingness to learn company procedures, customer specifications, and applicable safety requirements.
  • Candidates with mechanical aptitude, hands‑on rig‑up experience, a strong work ethic, and a willingness to learn are encouraged to apply.
  • Valid driver’s license.
  • Ability to pass client‑required drug testing and background screening.
  • Ability to travel extensively throughout the United States and work in remote locations for extended periods.
  • Ability to work extended hours, weekends, holidays, and night shifts as projects require.
  • Ability to work safely with hand tools, power tools, hydraulic equipment, and heavy mechanical components.
  • Basic mechanical aptitude and ability to follow instructions, measurements, and equipment specifications.
  • Strong verbal communication skills, teamwork, and attention to detail.
  • Ability to perform physically demanding work, including lifting, bending, kneeling, climbing, and prolonged standing.
  • Ability to safely handle tools and materials using assistance or mechanical lifting equipment when required.
  • Ability to pass a fit‑for‑duty assessment consistent with job responsibilities.
  • Ability to work outdoors in hot, cold, wet, and other challenging conditions.
  • Dependable attendance, positive attitude, safety awareness, and willingness to assist across JP Services service lines.
Knowledge, Skills And Abilities
  • Assist with rig‑up and rig‑down of piping systems, hoses, manifolds, valves, fittings, and equipment used in pipeline operations.
  • Perform make‑ready activities, including preparing flanged connections for assembly, inspection, and testing.
  • Assist with flange alignment, gasket installation, stud and bolt placement, and bolt‑up activities.
  • Use approved torque specifications, tightening sequences, and procedures under appropriate supervision.
  • Assist with hydraulic torque wrenches, pneumatic and manual torque tools, impact wrenches, and specialized bolting equipment.
  • Inspect flange faces, gaskets, studs, nuts, and other components for cleanliness, damage, correct rating, and suitability before installation.
  • Assist in preparing systems for hydrostatic or pneumatic testing, cleaning, and commissioning.
  • Identify, organize, load, unload, inspect, and properly store company tools, materials, and equipment.
  • Coordinate with technicians, Foremen, and Supervisors to complete work safely and according to project schedules.
  • Follow company and customer safety requirements, including PPE, line‑of‑fire, pinch‑point, lifting, stored‑energy, and pressure‑safety precautions.
  • Assist with torque records, equipment inspections, job safety analyses, and other required documentation.
  • Report damaged equipment, unsafe conditions, material discrepancies, and quality concerns promptly.
  • Maintain a clean and organized work area and protect company assets.
  • Cross‑train and support other JP Services service lines, including pipeline testing and cleaning, as operational needs require.
  • Demonstrate teamwork, accountability, professionalism, and a commitment to meeting customer expectations.
  • Previous experience in pipeline construction, fabrication, rig‑up, flange bolt‑up, and hydraulic torquing is preferred.
  • Experience rigging up and assembling piping systems, hoses, manifolds, valves, and equipment for pipeline testing, cleaning, and commissioning is preferred.
  • Experience with flange alignment, gasket installation, stud and bolt installation, and proper tightening and torquing procedures is preferred.
  • Familiarity with hydraulic torque wrenches, pneumatic tools, impact wrenches, and specialized bolting equipment is a plus.
  • Ability to read basic piping drawings, identify flange sizes and pressure ratings, and understand mechanical assembly requirements is beneficial.
  • Experience in pipeline hydrostatic testing, chemical cleaning, industrial flushing, or related services is a plus.
  • Pipeline construction, industrial mechanical, pipefitting, or similar trade experience is preferred but not required.
  • Ability and willingness to learn company procedures, customer specifications, and applicable safety requirements.
  • Candidates with mechanical aptitude, hands‑on rig‑up experience, a strong work ethic, and a willingness to learn are encouraged to apply.
  • Valid driver’s license.
  • Ability to pass client‑required drug testing and background screening.
  • Ability to travel extensively throughout the United States and work in remote locations for extended periods.
  • Ability to work extended hours, weekends, holidays, and night shifts as projects require.
  • Ability to work safely with hand tools, power tools, hydraulic equipment, and heavy mechanical components.
  • Basic mechanical aptitude and ability to follow instructions, measurements, and equipment specifications.
  • Strong verbal communication skills, teamwork, and attention to detail.
  • Ability to perform physically demanding work, including lifting, bending, kneeling, climbing, and prolonged standing.
  • Ability to safely handle tools and materials using assistance or mechanical lifting equipment when required.
  • Ability to pass a fit‑for‑duty assessment consistent with job responsibilities.
  • Ability to work outdoors in hot, cold, wet, and other challenging conditions.
  • Dependable attendance, positive attitude, safety awareness, and willingness to assist across JP Services service lines.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Pipefitter
Pipefitter

Taurus Industrial Group • Geismar (LA)

On-site
USD 33,000 - 50,000
Pipefitter
Pipefitter

Taurus Industrial Group • Freeport (TX)

On-site
USD 65,000 - 90,000
Field Pipeline Technician I/II - Herscher, IL
Field Pipeline Technician I/II - Herscher, IL

DT Midstream, Inc. • Portland (TN)

On-site
USD 66,000 - 77,000
Medical, Dental, Vision benefits
401(k) with employer match
Paid holidays and vacation
Field Pipeline Technician I/II - Herscher, IL
Field Pipeline Technician I/II - Herscher, IL

DT Midstream • Mitchell (TN)

On-site
USD 66,000 - 77,000
Medical insurance
Dental insurance
Vision insurance
+2
Pipeline Technician
Pipeline Technician

NGL Shared Services • Carlsbad (NM)

On-site
USD 30,000 - 48,000
Field Pipeline Technician I/II - Sycamore, Genoa, Dekalb, IL
Field Pipeline Technician I/II - Sycamore, Genoa, Dekalb, IL

DT Midstream • Channahon (IL)

On-site
USD 47,000 - 71,000
Medical, Dental, Vision
401(k) with employer match
Paid holidays and vacation
+2
Pipeline Foreman
Pipeline Foreman

B & G Roustabout Service, Llc • Williston (ND)

On-site
USD 75,000 - 110,000
Project Manager - Construction
Project Manager - Construction

Targa Resources • Stanton (TX)

On-site
USD 110,000 - 160,000
Equipment and Service Technician
Equipment and Service Technician

Milwaukee Succeeds • Milwaukee (WI)

On-site
USD 30,000 - 48,000
Medical Plan options
Dental and Vision Insurance
FSA/HSA options
+5
Field Pipeline Operations Technician
Field Pipeline Operations Technician

Kinetik • New Mexico

Hybrid
USD 48,000 - 76,000