Technician

Aerotek; Town of Florida (NY); On-site; USD 25,000 - 30,000; Full time

Benefits offered by this job

Weekly pay

Medical insurance

Dental insurance

Vision insurance

401(k) plan

Paid time off

Job summary

Aerotek is seeking a Pipe Prep, Fabrication and Tubing Technician for our Rockledge, FL shop. This hands-on role involves cutting, prepping pipe, tubing installation, and operating shop equipment to meet drawings and quality standards for downstream welding, assembly, and integration work.

You will follow safety procedures and contribute to an efficient production flow. You will read fabrication drawings, measure and mark materials, deburr and prep parts, and support fit-up and fabrication

Qualifications

• Experience in a manufacturing/fabrication shop environment.
• Ability to read a tape measure and mark materials accurately.
• Experience using band saws, grinders, and basic fabrication equipment.
• Comfort working with stainless steel and other fabrication materials.
• Willingness to learn and operate additional fabrication equipment, including a knee mill.

Responsibilities

• Cut, prep, and stage pipe for fabrication and welding operations per requirements.
• Measure, mark, and prepare materials using drawings and work instructions.
• Run and install tubing following drawings and routing requirements.
• Operate band saws, ironworkers, and other fabrication equipment safely.
• Deburr, grind, and prep materials for downstream work.
• Verify parts and materials are correct before cutting or fabricating.
• Maintain organized material flow and support production efficiency.
• Identify issues early and communicate them promptly.
• Support fit-up and fabrication readiness for welders and assemblers.
• Perform basic inspection of completed work for accuracy and quality.
• Follow safe work practices and wear PPE.

Skills

Reading drawings

Tape measure use

Fabrication skills

Attention to detail

Safety consciousness

Team collaboration

Willingness to learn

Comfort with PPE

Tools

Band saws

Ironworkers

Tubing tools

Knee mill (learning)

Job description

Job Title: Pipe Prep, Fabrication and Tubing Technician

Job Description

This hands-on role supports pipe preparation, tubing installation, and general fabrication work within a manufacturing shop. You will cut and prep pipe, run and install tubing, and operate shop equipment such as band saws and ironworkers to provide accurate, clean, and on-time fabrication that feeds downstream welding, assembly, and integration work. You will work safely, follow drawings and instructions, maintain high quality standards, and contribute to an efficient production flow while continuously developing your fabrication skills, including potential training on a knee mill.

Responsibilities

• Cut, prep, and stage pipe for fabrication and welding operations in accordance with production requirements.
• Measure, mark, and prepare materials accurately using drawings, cut lists, and work instructions.
• Run and install tubing following drawings, routing requirements, and workmanship standards.
• Operate band saws, ironworkers, and other fabrication equipment safely and correctly.
• Deburr, grind, clean, bevel, and prep materials to ensure they are ready for downstream work.
• Verify that parts and materials are correct before cutting or fabricating to prevent errors and rework.
• Maintain organized material flow and work area control to support production efficiency and throughput.
• Identify issues early, including bad material, dimensional errors, missing information, or tooling problems, and communicate them promptly.
• Support fit-up and fabrication readiness for welders, assemblers, and integration teams.
• Perform basic inspection of completed work to confirm accuracy, completeness, and workmanship quality.
• Consistently follow safe work practices and use required personal protective equipment (PPE).
• Contribute to continuous improvement in shop organization, tooling, and fabrication flow.
• Learn and operate additional shop equipment and fabrication processes as needed, including potential operation of a knee mill.

Essential Skills

• Experience working in a manufacturing, fabrication, mechanical, or industrial shop environment.
• Ability to read a tape measure and perform accurate measuring and marking of materials.
• Ability to use hand tools, grinders, and basic fabrication equipment safely and effectively.
• Mechanical aptitude and comfort working in a hands-on production environment.
• Ability to follow drawings, cut lists, work instructions, and direction from leads or supervisors.
• Strong attention to detail and commitment to producing accurate, high-quality work.
• Reliable attendance and a consistent, dependable work ethic.
• Ability to operate band saws and basic tubing tools or willingness to learn.
• Ability to perform deburring, beveling, and material prep tasks or willingness to learn.
• Capability to work safely with stainless steel and other fabrication materials.

Additional Skills & Qualifications

• Experience cutting and prepping pipe in a fabrication environment.
• Experience running tubing and installing tubing systems.
• Experience operating band saws and ironworkers in a production shop.
• Experience handling and preparing stainless steel materials.
• Experience reading fabrication drawings or isometric drawings.
• Experience with deburring, beveling, and preparing weld‑ready materials.
• Interest in learning and operating additional fabrication equipment, including a knee mill.
• Comfort working with bandsaws, tubing, stainless materials, and deburring tools.

Why Work Here?

You will join a culture built on collaboration, ambition, and purpose, where your craftsmanship directly supports high-quality production. The organization offers medical, dental, and vision insurance, a 401(k) plan, paid time off and holidays, and professional development assistance to support your growth. You can take advantage of overtime options and build your skills in a supportive environment that values safety, continuous improvement, and hands‑on learning.

Work Environment

This role is based in an active manufacturing shop environment with a strong focus on safety and quality. You will stand and walk for extended periods during your shift and regularly lift, carry, and move pipe, tubing, and fabrication materials. The work involves bending, kneeling, crouching, and performing tasks around operating fabrication equipment. You will use band saws, ironworkers, grinders, and other fabrication tools, and you must wear required PPE at all times. The standard work schedule is Monday to Friday, 7:00 am to 3:30 pm, with a flexible option of Monday through Thursday, 6:30 am to 5:00 pm. Overtime opportunities may be available based on production needs.

Job Type & Location

This is a Contract position based out of Rockledge, FL.

Pay and Benefits

The pay range for this position is $18.00 - $22.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

Workplace Type

This is a fully onsite position in Rockledge,FL.

Application Deadline

This position is anticipated to close on Sep 23, 2026.

About Aerotek

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.