Technical Services Engineer - OSD Equipment

WuXi AppTec

Middletown (DE)

Sur place

USD 85 000 - 130 000

Plein temps

Il y a 4 jours
Soyez parmi les premiers à postuler

Obtenez une réponse de cet employeur

Votre CV et votre lettre de motivation, adaptés exactement à ce que l’employeur recherche.

Passez les filtres ATS

Résumé du poste

WuXi AppTec in Middletown, DE seeks Technical Services Engineers - Maintenance & Reliability to join the Manufacturing Technical Services team. You will own OSD equipment maintenance, troubleshooting, calibration, and reliability improvements, collaborating with cross-functional teams throughout GMP operations.

These roles focus on start-up through routine operations, with emphasis on safe, compliant, and cost-efficient lifecycle management, preventive plans, and change controls.

Qualifications

  • Bachelor's degree in Mechanical, Electrical, or Instrumentation/Controls Engineering or related technical discipline with 5+ years of relevant pharmaceutical manufacturing experience.
  • Hands-on experience troubleshooting, maintaining, and improving industrial/pharma manufacturing equipment.
  • Knowledge of preventive and corrective maintenance, equipment criticality, reliability practices, and CMMS/work-order systems.
  • Ability to interpret mechanical/electrical drawings, P&IDs, and equipment manuals.
  • Structured troubleshooting skills and ability to communicate practical technical recommendations.

Responsabilités

  • Serve as equipment SME for assigned OSD manufacturing and packaging systems and provide hands-on technical support for reliable operation.
  • Lead or support troubleshooting and root-cause analysis for equipment failures and unplanned downtime.
  • Develop, implement, and improve maintenance strategies, PM plans, and criticality assessments.
  • Create and maintain PM and corrective maintenance job plans in the CMMS with tasks, frequencies, and documentation.
  • Support equipment modifications, upgrades, and change controls emphasizing maintainability and lifecycle cost.
  • Coordinate OEM and specialty-service support while building internal troubleshooting capability.
  • Provide mechanical support for motors, gearboxes, bearings, seals, pumps, valves, and related systems.
  • Support I&E for sensors, transmitters, panels, wiring, and instrument loops with Automation/CSV as applicable.
  • Perform failure analysis and develop corrective actions for recurring issues.
  • Maintain spare-parts strategies, vendor part numbers, and obsolescence risk.
  • Support calibration readiness and lifecycle documentation for equipment and instruments.
  • Ensure documentation and safe, qualified state before release back to Manufacturing.
  • Assist with start-up, installation, commissioning, qualification, and handover activities.

Connaissances

Troubleshooting
Root cause analysis
Preventive maintenance
Maintenance planning
Calibration

Formation

Bachelor's degree in Mechanical Engineering
Bachelor's degree in Electrical Engineering
Bachelor's degree in Instrumentation/Controls Engineering

Outils

CMMS
SAP

Description du poste

Job Summary

We are seeking Technical Services Engineers - Maintenance & Reliability to join the Manufacturing Technical Services team at the Middletown drug product facility. This job description supports two planned positions reporting to the Technical Services Manager / Lead, with complementary technical focus areas in Mechanical equipment and Instrumentation/Electrical (I&E). The Engineers will provide hands‑on technical ownership for Oral Solid Dosage (OSD) manufacturing equipment, including preventive and corrective maintenance, troubleshooting, reliability improvement, calibration support, spare‑parts strategy, CMMS execution, and lifecycle technical services.

The Technical Services Engineers will support equipment from start‑up and handover through routine GMP operations and will work closely with Manufacturing, Engineering Management, Automation/CSV, CQV, Quality, EHS, equipment vendors, and service providers. These are individual‑contributor positions with no direct reports.

Key Responsibilities
Manufacturing Equipment Technical Services
  • Serve as an equipment SME for assigned OSD manufacturing and packaging systems and provide hands‑on technical support for reliable routine operation.
  • Lead or support troubleshooting and root‑cause analysis for equipment failures, recurring alarms, mechanical, electrical, instrumentation, and control‑related issues, and unplanned downtime.
  • Develop, implement, and continuously improve equipment maintenance strategies, preventive‑maintenance plans, and equipment criticality assessments using vendor manuals, operating history, risk assessments, and production requirements.
  • Create and maintain preventive and corrective maintenance job plans in the site CMMS, including required tasks, frequencies, parts, tools, safety precautions, acceptance criteria, and documentation requirements.
  • Support equipment modifications, upgrades, replacements, reliability improvements, and change controls with focus on maintainability, safety, compliance, and lifecycle cost.
  • Coordinate OEM and specialty‑service support when required while building sufficient internal technical capability for routine troubleshooting and maintenance.
Mechanical / I&E Maintenance and Reliability
  • Provide mechanical support for motors, gearboxes, bearings, seals, couplings, belts, chains, pumps, valves, pneumatic and vacuum systems, material‑handling equipment, lifts/hoists, guards, and containment interfaces.
  • Provide or coordinate I&E support for sensors, switches, transmitters, load cells, temperature/pressure devices, motors/VFDs, electrical panels, field wiring, instrumentation loops, and equipment interlocks, in coordination with Automation/CSV as applicable.
  • Perform structured failure analysis and develop corrective actions for recurring mechanical, electrical, or instrumentation reliability issues.
  • Establish and maintain critical spare‑parts and consumables strategies, including vendor part numbers, GMP criticality, stocking recommendations, obsolescence risk, and replacement planning.
  • Support reliability improvement initiatives using equipment history, work‑order trends, FMEA/criticality assessments, vendor recommendations, and condition‑based information where available.
Calibration and Metrology Support
  • Support the site Calibration & Maintenance program for assigned equipment and maintain equipment/instrument master data, critical instrument lists, calibration frequencies, tolerances, ownership, and status in applicable systems.
  • Partner with Automation/CSV, CQV, Quality, and calibration service providers to define and maintain calibration/performance‑check requirements for critical manufacturing equipment instruments.
  • Review calibration certificates and performance‑check records as assigned and support investigation and technical impact assessment for out‑of‑tolerance or failed results.
  • Support development and lifecycle maintenance of equipment‑specific calibration instructions, performance‑check protocols/reports, and associated GMP records where required.
  • Ensure maintenance and calibration work is properly documented and equipment is returned to a safe, controlled, and qualified state before release back to Manufacturing.
Start‑up, Handover, and Lifecycle Support
  • Support SAT, installation, commissioning, qualification, start‑up, and handover activities with emphasis on maintainability, spare parts, PM requirements, calibration readiness, vendor documentation, and service strategy.
  • Review vendor O&M manuals, BOMs, recommended maintenance tasks, drawings, lubrication requirements, instrument lists, and service recommendations and translate them into site maintenance and calibration programs.
  • Support technical readiness for new product introduction, technology transfer, scale‑up, capacity changes, and equipment modifications where equipment reliability or maintenance strategy is affected.
  • Maintain accurate lifecycle documentation, including equipment files, maintenance strategies, PM plans, calibration records, work orders, spare‑parts information, drawings, and vendor service records.
GMP, Safety, and Cross‑Functional Support
  • Execute assigned work in accordance with cGMP requirements, site procedures, EHS requirements, lockout/tagout expectations, and applicable engineering and maintenance standards.
  • Support deviation investigations, CAPA, change control, risk assessments, audit/inspection responses, and technical impact assessments related to assigned manufacturing equipment.
  • Work closely with Manufacturing to prioritize equipment issues and plan maintenance windows while protecting safety, product quality, schedule, and equipment reliability.
  • Support creation and revision of maintenance SOPs, technical work instructions, troubleshooting guides, and equipment training materials and provide technical coaching as appropriate.
  • Participate in continuous‑improvement initiatives that improve equipment availability, maintainability, compliance, throughput, and total cost of ownership.
Required Qualifications
  • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Instrumentation/Controls Engineering, or a related technical discipline with 5+ years of relevant pharmaceutical, biotechnology, or regulated manufacturing-equipment experience; an equivalent combination of education and strong hands‑on technical experience may be considered.
  • Demonstrated hands‑on experience troubleshooting, maintaining, and improving industrial or pharmaceutical manufacturing equipment.
  • Working knowledge of preventive and corrective maintenance, equipment criticality, reliability practices, spare‑parts management, and CMMS/work‑order systems.
  • Understanding of cGMP equipment lifecycle requirements, maintenance documentation, change control, deviation/CAPA processes, and maintenance of equipment in a qualified/controlled state.
  • Ability to interpret mechanical/electrical drawings, P&IDs, equipment manuals, wiring diagrams, instrument data, parts lists, and technical specifications.
  • Strong structured troubleshooting and root‑cause analysis skills with the ability to communicate clear and practical technical recommendations.
  • Ability to work effectively with Manufacturing, Engineering, CQV, Quality, EHS, Automation, vendors, and contractors in a fast‑paced start‑up and operational environment.
Preferred Qualifications
  • Experience with OSD manufacturing and packaging equipment such as granulation, blending/bin handling, roller compaction, milling/sieving, tablet compression, encapsulation, coating, and packaging systems.
  • Experience with high‑containment OEB3/OEB4 equipment, isolators/containment interfaces, vacuum transfer, and contained material‑handling systems.
  • Experience developing or optimizing PM programs, reliability strategies, equipment criticality assessments, critical‑spare strategies, and CMMS master data/job plans.
  • Experience supporting equipment start‑up, commissioning, qualification, and operational handover in a greenfield or major expansion environment.
  • Working knowledge of calibration/performance‑check programs and critical instrument management for manufacturing equipment.
  • Experience with SAP or another enterprise CMMS and familiarity with OEM service management, FMEA/RCM, condition‑based maintenance, or predictive‑maintenance tools is desirable.
  • Prior experience supporting regulatory inspections, customer audits, or internal audits in a pharmaceutical manufacturing environment.

An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against based on disability

This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job‑related duties as requested by Management.

Obtenez votre examen gratuit et confidentiel de votre CV.

ou faites glisser et déposez votre fichier ici.

Similar jobs

Postes similaires à comparer

Lead Maintenance Mechanic
Lead Maintenance Mechanic

WuXi AppTec • Town of Middletown (NY)

Sur place
USD 85 000 - 120 000
Maintenance Mechanic
Maintenance Mechanic

Katalyst CRO • Tampa (FL)

Sur place
USD 45 000 - 65 000
Lead Technician, Maintenance
Lead Technician, Maintenance

Merck • North Carolina

Sur place
USD 39 000 - 52 000
Operations System Specialist
Operations System Specialist

Resmed Springboard • Greenwood (IN)

Sur place
USD 90 000 - 130 000
Lead Instrumentation and Electrical Technician
Lead Instrumentation and Electrical Technician

WuXi AppTec • Town of Middletown (NY)

Sur place
USD 95 000 - 135 000
Pharma Maintenance Engineer
Pharma Maintenance Engineer

Umanist NA • Chantilly (VA)

Sur place
USD 70 000 - 90 000
Maintenance Mechanic
Maintenance Mechanic

BioTalent • Holly Springs (NC)

Sur place
USD 50 000 - 70 000
Competitive pay
Comprehensive benefits
Technical growth opportunities
Technician, Production Reliability, Sunday-Thursday 10:45PM-7:15AM; potential temporary weekend shi
Technician, Production Reliability, Sunday-Thursday 10:45PM-7:15AM; potential temporary weekend shi

Hikma Pharmaceuticals PLC • Columbus (OH)

Sur place
USD 42 000 - 66 000
Manufacturing Equipment Technician
Manufacturing Equipment Technician

Accelera Staffing • Waunakee (WI)

Sur place
USD 52 000 - 76 000
Engineering & Maintenance Manager
Engineering & Maintenance Manager

Confidential Recruiting Partners • Ayer (MA)

Sur place
USD 120 000 - 180 000
Paid time off
Paid holidays
Bonus eligible
+4