Team Leader - 1st Shift

Lydech Thermal Acoustic Solutions (TAS)

Hamptonville (NC)

On-site

USD 50,000 - 70,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Lydech Thermal Acoustic Solutions (TAS) seeks a production supervisor to meet business unit targets, improve OEE, reduce scrap, and ensure on-time delivery. You will input production data, generate reports, and coordinate line operators to meet standard work and production schedules.

Responsibilities include maintaining staffing, reviewing schedules, coordinating line changes, and monitoring hourly performance.

Qualifications

  • High school diploma or equivalent required; forklift license preferred.
  • Experience leading production teams and coordinating line operations.
  • Strong communication, problem solving, and cross-functional collaboration.

Responsibilities

  • Ensure daily line staffing is sufficient to meet production and delivery requirements.
  • Review schedules and communicate priorities to shift teams and planners.
  • Coordinate line changes, startup, and transitions for maximum effectiveness.
  • Monitor hourly performance and coordinate support to correct off-target performance.
  • Adhere to Visual Management controls and implement improvement actions.
  • Ensure compliance to operating standards and address non-conformances.
  • Develop expertise to provide cross-trained coverage and problem-solving support.
  • Participate in continuous improvement programs and safety rules.

Skills

Leadership / Coaching
Customer Focus
Drive for Results
Creative Problem Solving
Interpersonal Relationships
Communication
Accountability

Education

High School Diploma or Equivalent
Fork Lift license

Tools

Oracle
Visual management (Kanban)

Job description

Will be responsible for meeting Business Unit, OEE (Overall Equipment Effectiveness), Scrap reduction, and On Time Delivery targets. Completes part production data input and reporting requirements and coordinates machine operator and line operator assignments to meet part specific standard work and production schedules.

Duties and Responsibilities:

  • Ensure daily line staffing is sufficient to meet production and delivery requirements
  • Reviews schedule and order requirements for each production line. Communicates with other shift team leaders / shift manager on schedule/ order status and known priorities. Immediately notifies Planner and Manager of unplanned downtime or at risk order requirements
  • Coordinate line change overs, shift start ups, and shift transitions for maximum effectiveness.
  • Monitors hourly performance for each production line. Coordinates assistance from shift manager, process engineer, quality engineer, maintenance or other support functions as needed to immediately correct off- target line performance.
  • Functional knowledge of shop floor, Oracle, and Visual management (Kanban).
  • Ensures compliance to Visual Management controls. (Hour-By-Hour performance tracking, Line OEE, scrap, and 6S. Must be able to implement improvement actions where and when needed.
  • Ensures associate compliance to part and process operating standards and standards work requirements. Immediately corrects non-conformance to procedure and issues identified in Layered Process Audits.
  • Develops expertise in all line operations in order to provide break relief and operations knowledge base for problem solving activities.
  • Other additional duties assigned by manager

Other:

  • Serve as an active participant in LSS programs that promote continuous improvement
  • Must adhere to all company and location policies and safety rules
  • Must be able to work extended hours when required
  • All other duties as assigned

Education, Experience, Skills and Abilities Required for Consideration as a Candidate:

  • High School Diploma or Equivalent
  • Fork Lift license

Additional Education, Experience, Skills and Abilities Preferred:

  • Leadership / Coaching skills
  • Customer Focus
  • Drive for Results
  • Creative Program Solving
  • Interpersonal Relationships
  • Communication
  • Accountability

I. Physical Requirements of this Position

How much on-the-job time is spent performing the following physical activities?

Physical Activity

Amount of Time

None

Less than 1/3

1/3 to 2/3

More than 2/3

Standing

Walking

Use hands to finger, handle, or feel

Reach with hands and arms

Climb or balance

Stoop, kneel, crouch, or crawl

Talk or hear

Taste or smell

In an average workday, the employee primarily performs:

Sedentary Work: Lifting 10 lbs. Maximum and occasionally lifting and/or carrying such articles as computers and small tools. Although a sedentary job is defined as one which involves sitting, a certain amount of walking and standing is often necessary in carrying out job duties. Repetitive motion of hand and finger movement to manually input data using a keyboard or to assemble parts may be required for up to eight hours a day. Jobs are sedentary if walking and standing are required only occasionally and other sedentary criteria are met.

Medium Work: Lifting 50 lbs. Maximum with frequent lifting and/or carrying of object weighing up to 25 lbs.

Heavy Work: Lifting 100 lbs. Maximum with frequent lifting and/or carrying of object weighing up to 50 lbs.

Visual Acuity Requirements of this position including color, depth perception and field of vision (Check one)

Close Vision: Clear vision at 20” or less.

Distance Vision: Clear vision at 20’ or more.

Peripheral Vision: Ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point.

Depth Perception: Three-dimensional vision, ability to judge distances and spatial relationships.

Ability to Adjust Focus: Ability to adjust the eye to bring an object into sharp focus.

Select the level of noise that is typical in the work environment for this job: (Check one)

Quiet conditions: (Examples: private office)

Moderate noise: (Examples: business office with computer printers, light traffic, test and clean room environments)

Loud noise: (Examples: normal manufacturing conditions, fork truck and maintenance departments)

Very loud noise: (Examples: jack hammer work and areas that exceed 85dB)

How much exposure to the following environmental conditions does this job require?

Environmental Conditions

Amount of Time

None

Less than 1/3

1/3 to 2/3

More than 2/3

Wet or humid conditions (non-weather)

Work near moving mechanical parts

Work in high, precarious places

Fumes or airborne particles

Toxic or caustic chemicals

Outdoor weather conditions

Extreme cold (non-weather)

Extreme heat (non-weather)

Risk of electrical shock

Work with explosives

Risk of radiation

Vibration

Work/job-related travel

Additional physical requirements and/or environmental conditions not mentioned above: N/A

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey.Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiringprocess or thereafter. Any information that you do provide will be recorded and maintained in aconfidential file.

As set forth in Lydech Thermal Acoustic Solutions (TAS)’s Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection.As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measurethe effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categoriesis as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Machine Setup Technician - 2nd Shift
Machine Setup Technician - 2nd Shift

Lydech Thermal Acoustic Solutions (TAS) • Hamptonville (NC)

On-site
USD 28,000 - 39,000
Tooling Engineer Hamptonville, North Carolina
Tooling Engineer Hamptonville, North Carolina

Lydech Thermal Acoustical Inc. • North Carolina

On-site
USD 85,000 - 120,000
Shipping Material Handler (Forklift) - 3rd Shift
Shipping Material Handler (Forklift) - 3rd Shift

Lydech Thermal Acoustic Solutions (TAS) • Hamptonville (NC)

On-site
USD 19,000 - 27,000
Shipping Material Handler (Forklift) - 3rd Shift Hamptonville, North Carolina
Shipping Material Handler (Forklift) - 3rd Shift Hamptonville, North Carolina

Lydech Thermal Acoustical Inc. • North Carolina

On-site
USD 19,000 - 27,000
Senior Tooling Engineer: Lean Die & Tooling Lead
Senior Tooling Engineer: Lean Die & Tooling Lead

Lydech Thermal Acoustical Inc. • North Carolina

Hybrid
USD 70,000 - 110,000
1st Shift SXP Line Leader
1st Shift SXP Line Leader

Acme Engineering & Mfg Corp • Muskogee (OK)

On-site
USD 42,000 - 60,000
Sr. Tooling Engineer New Hamptonville, North Carolina
Sr. Tooling Engineer New Hamptonville, North Carolina

Lydech Thermal Acoustical Inc. • North Carolina

On-site
USD 70,000 - 110,000
Warehouse Supervisor
Warehouse Supervisor

Electronic Power Design • Houston (TX)

On-site
USD 55,000 - 75,000
Senior Controls Engineer
Senior Controls Engineer

Group14 Technologies • Moses Lake (WA)

On-site
USD 105,000 - 135,000
Medical, Dental, and Vision covered
Employee Assistance Program
Long-Term and Short-Term Disability
+4
1st & 2nd Shift Machine Operators
1st & 2nd Shift Machine Operators

TRILLIUM MANAGEMENT US, INC. • Easton (MD)

On-site
USD 26,000 - 33,000