Systems Integration Engineer

Sport Truck USA, Inc.; Braselton (GA); Hybrid; USD 90,000 - 130,000; Full time

Job summary

FOX Factory is seeking a Systems Integration Engineer to advance chassis control systems across automotive and off-road applications. You will lead integration, bring-up and validation of hardware and embedded software, collaborating with cross-functional teams to design sensors, wiring, and data acquisition solutions.

Strong problem-solving and documentation are essential. Required are a BS in engineering and 3–5 years in automotive or industrial mobile machines, with hands-on integration

Qualifications

• BS degree in a relevant engineering field and 3–5 years in automotive or industrial mobile machine contexts.
• Hands-on system integration and problem-solving for vehicle ECUs, sensors and networks.
• Ability to validate inputs/outputs and confirm ECU behavior meets expectations.
• Experience with automotive networks and protocols; familiarity with CAN/CAN FD/LIN/PSI5/FlexRay.
• Proficient in documenting system architecture and wiring diagrams.

Responsibilities

• Lead system bring-up, troubleshooting and validation of hardware and embedded software.
• Design and implement sensors, data acquisition and new electrical architectures.
• Create detailed bring-up procedures and installation guides; develop system block diagrams.
• Collaborate across product planning, hardware, control systems and software teams.
• Maintain rigorous attention to detail and drive continuous improvement.

Skills

Hands on system integration

Problem solving vehicle issues

Automotive CAN/CAN FD experience

CAN Bus network understanding

Technical communication

System requirements derivation

Wiring diagrams & installation guides

Attention to detail

Continuous improvement mindset

Programming: Python, C/C++, MATLAB

Electrical concepts & test equipment

Wire harness adjustments

Education

BS in Mechanical, Electrical, Automotive or related engineering field

Tools

Vector CANalyzer

Intrepid Vehicle Spy

CANoe

vFlash

PiSnoop

CANape

Job description

What We Do

FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side‑side vehicles, on‑road vehicles with and without off‑road capabilities, off‑road vehicles and trucks, all‑terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq.

Why you should join us

Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it’s a fun environment where we truly enjoy working as a team and bringing great products to our customers!

Position Overview

An exciting role exists for a Systems Integration Engineer, specializing in OE Automotive development within the Software Electronics Team at FOX. The Software Electronics Team creates, develops and implements new hardware, embedded software and chassis control systems for a range of FOX markets including automobiles, off‑road vehicles, ATVs, snowmobiles, motorcycles, and future transportation models. The team works collaboratively with all PVG (Powered Vehicle Group) business groups. The candidate will be instrumental in the integration of chassis control systems, which include designing and implementing sensors, data acquisition equipment, new electrical architectures and wiring schematics. The role also will lead system bring up, trouble shooting and validation of control systems that include hardware and embedded software. To be part of this team, the candidate must be a creative, forward thinker that is dedicated to advancing control systems capabilities of FOX, a major growth vector and opportunity for the candidate. The candidate must also demonstrate a relevant and highly motivated work history.

Required Qualifications / Experience

• BS in Mechanical, Electrical, Automotive or related engineering field. 3-5 years as an engineer in the automotive, or industrial mobile machine industry.
• Hands on system integration experience
• Demonstrated experience in problem solving vehicle related issues involving electronic control units, sensors, and communication networks.
• Experience in validating all required system inputs and outputs. Ability to understand control logic at a high level and verify that an ECU is receiving inputs and driving outputs in expected ways.
• Knowledge of automotive communication protocols (CAN, CAN FD, LIN, PSI5, FlexRay). Experience with CAN analysis tools such as Vector CANalyzer, Intrepid Vehicle Spy, etc.
• Good understanding of automotive CAN Bus including network architecture, physical layer rules, encoding/decoding of raw data, limitations of the protocol, etc.
• Experience with ECU flashing tools such as vFlash.
• Strong technical communication skills and ability to lead issue resolution across teams.
• Ability to establish system requirements from cross functional teams including product planning, hardware, control systems, and software.
• Creation of detailed bring-up procedures, wiring diagrams, and installation guides. Experience documenting the overall system architecture and creating system block diagrams.
• Strong attention to detail.
• Continuous improvement mindset: Develop new or improved processes for installation and testing of integrated and distributed systems.
• Basic programming in Python, C/C++, MATLAB, etc.
• Basic understanding of electrical concepts and ability to interpret basic circuits. Experience with electrical test bench equipment such as power supplies, oscilloscopes, multimeters, etc.
• Ability to make quick adjustments to wiring harnesses. Candidate must be comfortable with basic wire-working tools.

Preferred Experience / Skills

• Experience/familiarity with any of the following is preferred: Familiarity with Simulink and auto-code generation.
• Familiarity with basic DSP and signal conditioning (ADC, filtering, aliasing, etc.)
• Familiarity with real-time systems and basic embedded concepts.
• Experience with advanced CAN network design/development, simulation and test tools such as vector CANoe.
• General knowledge of other common protocols such as TCP/IP, UDP/IP, etc.
• Experience with ECU calibration over XCP/CCP using tools like Vector CANape, PiSnoop, etc.
• Experience developing scripts to automate the acquisition and validation of measurement data using Python, MATLAB, etc.
• Ability to perform basic statistics and data analysis.
• Experience in the domain of chassis systems.
• Familiarity with HIL setups (dSpace, NI Labview OPAL-RT or similar).
• Ability to architect, design and build a complete HIL bench based on system requirements is a strong plus.
• Sensor integration and calibration (IMUs, displacement, LiDAR/Cameras, etc.).
• Familiarity with the control of servos, BLDCs, solenoids, and other electromechanical devices and actuators.
• Experience with GitHub or other version control and issue tracking systems.

Competencies

• Customer Mindset: Exceptional customer experience is the primary focus while performing job duties. Quality is a top priority.
• Adaptability & Innovation: Proactively and willingly adapts to changing business needs and conditions, presents creative and fresh ideas on how to solve problems, gain efficiencies and improve quality.
• Relationship Building: Self-starter with solid communication and interpersonal skills. Builds constructive working relationships characterized by a high level of inclusion, cooperation and mutual respect.
• Accountability: Takes personal responsibility for the quality and timeliness of work and strives to exceed requirements.
• Decision Making and Judgment: Makes timely, informed decisions that take into account the facts, goals, constraints and risks.
• Talent Development (Self and Others): Displays an ongoing commitment to learning and self-improvement; makes an effort to acquire new knowledge or skills associated with job responsibilities. Willingness to work with others and coach/teach in effort to support other employees’ development.