Supplier Quality & Readiness Engineer

parallel

Los Angeles (CA)

On-site

USD 110,000 - 165,000

Full time

13 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Parallel Systems in Los Angeles is building autonomous battery-electric rail vehicles and seeks a Supplier Quality & Readiness Engineer to own purchased parts from sourcing through production, ensuring readiness for ramp. You will collaborate with Procurement, Design Engineering and Manufacturing to qualify and launch new suppliers, driving containment and corrective actions.

As an early employee at a fast-moving startup, you will lead APQP/PPAP/FAI, maintain readiness trackers, and elevate

Qualifications

  • BS in Mechanical, Electrical, Industrial, Manufacturing or Materials Engineering or equivalent.
  • 5+ years in supplier quality, supplier development or NPI in regulated industry.
  • Hands-on APQP and PPAP/FAI experience.
  • Structured problem solving: 8D, 5-Why, Ishikawa.
  • PFMEA, control plans, MSA, SPC and process capability studies.
  • Reading drawings and GD&T to assess manufacturability.
  • Experience with ISO 9001 or IATF 16949 audits.
  • Strong program management and cross-functional collaboration.

Responsibilities

  • Assess and qualify new suppliers with procurement, capability, quality systems, capacity and risk.
  • Run APQP with each supplier, including timing plans, FMEAs, control plans and gated reviews.
  • Drive PPAP or FAI to AS9102 where applicable, reviewing submissions and first articles.
  • Lead run‑at‑rate and capacity verification at supplier sites.
  • Track tooling, gauges and fixtures build and buy‑off, confirming ownership.
  • Provide DFM feedback to Design Engineering before release.
  • Maintain a part‑level readiness tracker and report status at gates.
  • Own supplier quality performance for assigned commodities.
  • Lead response to nonconforming material with containment and 8D actions.
  • Issue and manage SCARs and drive timely closures.
  • Audit supplier processes and quality systems on site.
  • Define incoming inspection plans and acceptance criteria.
  • Report supplier scorecards and elevate at‑risk suppliers.
  • Approve supplier change requests and re‑validate when needed.
  • Lead supplier development projects to improve process capability and error‑proofing.

Skills

APQP
PPAP
8D
Ishikawa
PFMEA
Control plans
GD&T
Read drawings
ISO 9001
IATF 16949
Program management

Education

BS in Mechanical/Electrical/Industrial/Manufacturing or Materials Eng

Tools

Minitab

Job description

Parallel Systems is pioneering autonomous battery-electric rail vehicles designed to transform freight transportation by shifting portions of the $900 billion U.S. trucking industry onto rail. Our innovative technology offers cleaner, safer, and more efficient logistics solutions. Join our dynamic team and help shape a smarter, greener future for global freight.

Supplier Quality & Readiness Engineer

As a Supplier Quality & Readiness Engineer, you will own purchased parts from sourcing award through steady‑state production as we build our vehicles and the factory to produce them at volume. You will work closely with Procurement, Design Engineering and Manufacturing to qualify and launch new suppliers so parts are ready before the line needs them. Then you will keep those suppliers in control by catching problems at the source, driving root cause and corrective action, and raising the capability of the supply base. As an early employee at a fast‑moving startup, you will help shape how Parallel builds and manages its supply base.

Responsibilities
  • Assess and qualify new suppliers with Procurement, covering capability, quality system, capacity, and operational and financial risk
  • Run APQP with each supplier, including timing plans, design and process FMEAs, control plans and gated readiness reviews
  • Drive PPAP (or FAI to AS9102 where applicable) to approval by reviewing submissions, witnessing first‑article builds and dispositioning gaps
  • Lead run‑at‑rate and capacity verification at supplier sites to prove they can meet the production ramp
  • Track tooling, gauge and fixture build and buy‑off, and confirm tooling ownership and identification
  • Feed supplier design‑for‑manufacturing and tolerance feedback to Design Engineering before release
  • Maintain a part‑level readiness tracker and report status and risk at program build gates
  • Own supplier quality performance for an assigned commodity portfolio (e.g., machined and fabricated structures, castings, electrical harnesses, battery and power electronics, motors and drivetrain)
  • Lead the response to nonconforming material, including containment, MRB disposition, 8D / root cause and verification that corrective actions work
  • Issue and manage Supplier Corrective Action Requests (SCARs) and drive them to closure on time
  • Run supplier process and quality‑system audits on site and close out findings
  • Define incoming inspection plans, sampling levels and acceptance criteria with receiving inspection
  • Track and report supplier scorecards (PPM, SCAR cycle time, cost of poor quality) and elevate at‑risk suppliers
  • Approve supplier change requests (process, material, site, sub‑tier) and require re‑validation where needed
  • Lead supplier development projects to improve process capability (Cpk), error‑proofing and control plans
What Success Looks Like
  • After 30 Days: You've reviewed every open part, taken over the readiness tracker, and learned our process for nonconforming parts and SCARs. Your tracker covers every assigned part, and you've visited 3-5 critical suppliers.
  • After 60 Days: You're running APQP reviews with every critical new supplier and have set a PPAP timeline for each part. You own corrective actions for your portfolio, your first supplier scorecard is out, at least 2 audits are complete, and SCARs older than 30 days are cut in half.
  • After 90 Days: Your first PPAP approvals have landed in time for the next build gate, and at least one critical supplier has proven it can build at rate. A monthly scorecard is running, and no parts in your portfolio have stopped the line.
Basic Qualifications
  • BS in Mechanical, Electrical, Industrial, Manufacturing or Materials Engineering, or equivalent experience
  • 5+ years of experience in supplier quality, supplier development or new‑product introduction in automotive, rail, aerospace, heavy equipment or a similar regulated industry
  • Hands‑on experience running APQP and approving PPAP or FAI packages
  • Experience with structured problem solving, including 8D, 5‑Why, Ishikawa and fault‑tree analysis
  • Working knowledge of PFMEA, control plans, MSA, SPC and process capability studies
  • Proficient in reading engineering drawings and GD&T and judging manufacturability
  • Experience leading supplier audits against ISO 9001 or IATF 16949
  • Strong program management skills, including timing plans, risk tracking and cross‑functional reviews
  • Willing to travel to supplier sites roughly 30‑50% of the time, with heavier travel during launches
Preferred Qualifications
  • ASQ CQE or CQA certification, Six Sigma Green or Black Belt, or PMP
  • Experience launching a new factory or new vehicle program, or working through a rapid production ramp
  • Process knowledge in one or more of machining, fabrication and welding, castings, injection molding, wire harness, or battery cells and modules
  • Experience with rail standards (ISO/TS 22163 / IRIS, AAR M‑1003) or EV high‑voltage components
  • Familiarity with a QMS or ERP system for NCR and SCAR tracki
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Supplier Quality & Readiness Engineer Los Angeles, CA
Senior Supplier Quality & Readiness Engineer Los Angeles, CA

Parallel Systems, Inc. • Los Angeles (CA)

On-site
USD 140,000 - 185,000
Senior Supplier Quality & Readiness Engineer
Senior Supplier Quality & Readiness Engineer

Parallel Systems • Los Angeles (CA)

On-site
USD 140,000 - 185,000
Supplier Quality Engineer
Supplier Quality Engineer

Aquent • Fremont (CA)

On-site
USD 110,000 - 150,000
Senior Supplier Quality & Readiness Engineer
Senior Supplier Quality & Readiness Engineer

parallel • Los Angeles (CA)

On-site
USD 110,000 - 165,000
Supplier Quality Engineer
Supplier Quality Engineer

Zobility • Auburn Hills (MI)

Hybrid
USD 70,000 - 90,000
Senior/Staff Supplier Quality & Development Engineer
Senior/Staff Supplier Quality & Development Engineer

divergent • Torrance (CA)

On-site
USD 110,000 - 170,000
Quality Engineer - Battery Energy Systems
Quality Engineer - Battery Energy Systems

BorgWarner • Seneca (SC)

On-site
USD 85,000 - 120,000
Part and Supplier Development Engineer
Part and Supplier Development Engineer

Hanon Systems • Novi (MI)

On-site
USD 80,000 - 100,000
Supplier Quality Engineer
Supplier Quality Engineer

Ingenium Talent • Nashville (TN)

On-site
USD 70,000 - 95,000
Supplier Quality Engineer
Supplier Quality Engineer

P1 Industries • City of Schenectady (NY)

On-site
USD 75,000 - 95,000