Enable job alerts via email!

Structural Fitter & Welder

SteelCon Inc.

Houston (TX)

On-site

USD 35,000 - 55,000

Part time

12 days ago

Boost your interview chances

Create a job specific, tailored resume for higher success rate.

Job summary

SteelCon Inc. is seeking a Structural Fitter & Welder to join their team in Houston, Texas. The role involves fabricating and assembling structural steel components while following industry standards and shop drawings. Successful candidates will receive comprehensive training and have opportunities for career advancement within a dynamic and supportive environment.

Qualifications

  • Ability to read and interpret shop drawings.
  • Ability to maintain AWS certification on a 1-inch plate.
  • Skill in using tools necessary for fitting and welding.

Responsibilities

  • Fabricate and assemble structural steel components using prescribed procedures.
  • Fit steel parts per shop drawings and quality requirements.
  • Perform welding operations as needed.

Skills

Communication
Attention to detail
Ability to work under supervision
Ability to multitask

Education

American Welding Society certification

Tools

Tape Measure
Weld Lead
Hand Torch

Job description

Join to apply for the Structural Fitter & Welder role at SteelCon Inc.

18 hours ago Be among the first 25 applicants

Join to apply for the Structural Fitter & Welder role at SteelCon Inc.

Get AI-powered advice on this job and more exclusive features.

Structural Fitter/Welder

Structural Fitter/Welder

At SteelCon Inc., we build the future of America's infrastructure with cutting-edge steel fabrication and structural solutions. From power to progress, we deliver unmatched quality and reliability-one project, one partnership, and one employee at a time.

We live by our core values: Excellence, Responsibility, Innovation, and Teamwork. These values fuel our success and create a dynamic environment where our employees grow and thrive. With a commitment to career development, advancement opportunities, and employee well-being, SteelCon is the place where your hard work turns into long-term success.

Scope Of Responsibility

This position involves fabricating and assembling structural steel components using prescribed procedures, industry standards, and detailed drawings. Employees must complete SteelCon's Welder & Fabricator Training Program.

Primary Purpose Of This Position

Fit steel parts for structural, plate, and misc. steel assemblies per shop drawings and quality requirements.

Essential Job Functions

  • Planning, laying out, and fitting metal components, such as plate stiffeners, stiffened panels, bulkheads, and frames using blueprints or templates and tools while maintaining alignment tolerances.
  • Locating and marking reference lines, such as center, buttock, and frame lines.
  • Alignment of parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
  • Setting, fitting, and erecting of structural assemblies and modules within alignment tolerances.
  • Installing structural foundations and outfit items such as doors, hatches, brackets, and clips.
  • May tack weld panels, bulkhead, assemblies, clips, and brackets.
  • May roll, bend, flange, cut, and shape plates, beams, and other metal parts using shop machinery, such as ironworkers, plate rolls, presses, and press brakes.
  • Ability to follow instructions, written and/or verbal, with little or no supervision.
  • Performing other related job duties as assigned in a safe and efficient manner; also, please see physical requirements.
  • Other typical duties performed by a fitter.

Qualifications

Knowledge, Skills, and Abilities:

  • Ability to read, write, and perform higher arithmetic computations involving addition, subtraction, multiplication, and division of whole numbers, decimals, and fractions.
  • Ability to understand and carry out semi-complicated verbal and written instructions.
  • Ability to effectively communicate with co-workers and managers.
  • Ability to work under periodic supervision focused on the progress of work and setting priorities for job completion.
  • Skill in using tape measure or 1" rule.
  • Ability to maintain American Welding Society certification on 1-inch plate in flat position using the gas metal arc welding and flux-cored arc welding processes.
  • Ability to pass the fillet weld break test using the gas metal arc welding process.
  • Ability to pass a Steelcon Inc administered basic welding test that covers shop drawing interpretation, weld symbols, welding processes, weld process symbol interpretation and application, and a visual acuity test.
  • Ability to pass a Steelcon Inc administered fitting test that covers shop drawing interpretation, fractional number calculations, basic geometry, etc.
  • Ability to interpret, understand, and utilize cutting lists, shop orders, and shop drawings.
  • Ability to operate a cutting torch to meet American Welding Society specifications.
  • Ability to possess pride in own workmanship, demonstrate attention to detail, and work safely.
  • Ability to operate forklifts, jib hoists, and overhead cranes in a safe and proper manner. Use and understand industry and Steelcon Inc adopted hand signals used for crane operations.
  • Ability to adjust welder to insure proper feed rate and temperature.
  • Ability to multitask.

Physical Demands

  • Stand CONTINUOUSLY over the course of the 8-to-12-hour work shift.
  • Walk CONTINUOUSLY over the course of the 8-to-12-hour work shift. The distances walked will range from a distance of a few feet to 60-foot length of a steel beam.
  • Sit only during the break and lunch periods. Rarely one will be able to sit while welding.
  • Lift weights up to 20 pounds from floor to chest CONTINUOUSLY, which includes the various tools utilized in the process of performing the usual work duties.
  • Lift weights up to 35 pounds from floor to waist FREQUENTLY, during the 10 to 12 during the work shift.
  • Lift weights up to 85 pounds from floor to waist OCCASIONALLY, during the 10 to 12 during the work shift. Jib cranes and overhead cranes are available for the employee's assistance with lifting.
  • Carry weights noted above distances ranging from a few feet to the 60-feet length of the steel beam.
  • Push and pull drawers open and closed OCCASIONALLY to FREQUENTLY to retrieve tools. An employee will OCCASIONALLY push a beam attached to a jib crane or overhead crane to properly guide into place. Force varies up to 35 pounds.
  • Climb OCCASIONALLY onto beams stacked on sawhorses to guide into place. An employee will OCCASIONALLY climb a ladder of 6 to 10 feet while performing job duties.
  • Stoop or crouch on an OCCASIONAL to FREQUENT basis while performing the regular job duties. The position will be held continuously for a few seconds to 15 minutes, depending upon the job.
  • Kneel in the commission of job duties on an OCCASIONAL to FREQUENT basis, depending upon the job. The position will be held continuously for a few minutes to 15 minutes.
  • Crawl RARELY under a beam to reach the opposite side. The distance crawled is less than 3 feet.
  • Reach forward CONTINUOUSLY to perform job duties or to retrieve tools. The employee will OCCASIONALLY be required to reach to full forward extension.
  • Reach overhead OCCASIONALLY to guide a beam attached to the cranes and to attach the chains from the crane to the beams or to weld while underneath the beam.
  • Balance OCCASIONALLY to climb ladders and to walk on steel beams. An employee will not be working at unprotected heights.
  • Gross finger dexterity skills to operate the various tools and equipment utilized in the course of standard job duties. A trigger squeeze motion is required to operate the grinders. Fine finger dexterity is not required.

Non-Material Handling Demands

  • Employee is expected to work 40 hours a week. However, hours including overtime and weekends may be required based Steelcon Inc needs.
  • Hear sufficiently to be aware of safety issues.
  • Visual ability to read and interpret cut lists and shop drawings. Safety glasses are required in the shop area.
  • Exposure to heat, cold, wet, and humid conditions in the shop area OCCASIONALLY.
  • Exposure to fumes, odors, and dust in the shop area OCCASIONALLY.
  • Exposure to solvents, greases, oils, and coolants OCCASIONALLY.
  • Wear all required Personal Protective Equipment. PPE includes steel-toe safety shoes, hearing protection, safety glasses, gloves, and hard hats.

Tools Required

Square, Tape Measure, Weld Lead, 4-inch grinder, 9-inch grinder, Ball Peen Hammer, Sledgehammer, Hand Torch, Wire Brushes, Chipping Hammers, Clamps, Stamping Taps, and Chains.

Machines Utilized

Welder, Overhead Crane, Jib Crane, Pallets, Sawhorses, and Forklifts.

Seniority level
  • Seniority level
    Entry level
Employment type
  • Employment type
    Part-time
Job function
  • Job function
    Management and Manufacturing
  • Industries
    Industrial Machinery Manufacturing

Referrals increase your chances of interviewing at SteelCon Inc. by 2x

Get notified about new Fitter jobs in Houston, TX.

Assembly Technician 1st Shift: 7:00 AM – 3:30 PM
Industrial Maintenance Technician Sign on Bonus $6,000
Maintenance Technician- Industrial Mechanic
Continuous Improvement & Engineering Support Technician
Fire Sprinkler Fitter/Service Technician - Convergentz

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Get your free, confidential resume review.
or drag and drop a PDF, DOC, DOCX, ODT, or PAGES file up to 5MB.

Similar jobs

Welder/Fitter for Houston Manufacturer

ZipRecruiter

Houston

On-site

USD 40,000 - 60,000

8 days ago

Welder/Fitter for Houston Manufacturer

Headworks International

Houston

On-site

USD 50,000 - 70,000

15 days ago

Fitter and Welder 2nd Shift

Davita Inc.

Houston

On-site

USD 10,000 - 60,000

Yesterday
Be an early applicant

Fitter and Welder 2nd Shift

Cornerstone Building Brands

Houston

On-site

USD 10,000 - 60,000

2 days ago
Be an early applicant

Aircraft Structural Mechanic

StandardAero

Houston

On-site

USD 50,000 - 70,000

2 days ago
Be an early applicant

Structural Welder/Fitter - Red Dog Mine, AK - Rotational Red Dog Mine, AK Posted today

NANA Regional Corporation

Alaska

Remote

USD 50,000 - 90,000

30+ days ago

Rope Access - Combination Welder - (Houston, Texas) - Austin Industrial (TPC) - Maintenance

Austin Bridge & Road

Houston

On-site

USD 10,000 - 65,000

7 days ago
Be an early applicant

Fitter and Welder 2nd Shift

Cornerstone Building Brands

Houston

On-site

USD 10,000 - 60,000

6 days ago
Be an early applicant

Mig Welder

Carlton Staffing Group

Houston

On-site

USD 10,000 - 60,000

2 days ago
Be an early applicant