Stores Clerk R3637

ND Paper; Langhorne (Bucks County); On-site; USD 38,000 - 52,000; Full time

Job summary

ND Paper Langhorne is seeking a Storeroom Clerk to manage the plant maintenance storeroom, ensuring accurate receiving, storage, and issuing of parts and supplies. You will support maintenance and production by keeping inventory in the system and physically organized.

Daily duties include logging receipts and issues, labeling parts, conducting cycle counts (daily, monthly), and maintaining clean, safe storeroom conditions.

Qualifications

• High school diploma or GED required.
• 1–3 years in storeroom, warehouse, or inventory control in manufacturing.
• Comfort with inventory management systems and quick learning.
• Strong attention to detail with exact part numbers and locations.
• Organized and self-directed; able to manage daily counts.
• Basic math skills for recounting and variance reconciliation.
• Reliable and consistent process follow-through.

Responsibilities

• Receive, inspect, document, and store incoming parts; verify against PO.
• Log all receipts with part number, description, quantity, vendor, PO, and bin.
• Label parts with IDs and place in correct bin locations.
• Issue parts only with a work order or approved request; log every issuance.
• Track loaner parts and ensure timely return or write-off.
• Perform daily cycle counts and reconcile counts to system records.
• Maintain accurate system records and update vendor/lead time data.
• Maintain clean storeroom and enforce safety policies.
• Prepare weekly variance reports and flag discrepancies for review.

Skills

Inventory control

Attention to detail

Organization

Data entry

Education

High school diploma or GED

Tools

CMMS/ERP

Inventory software

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Regular Store Room Langhorne, PA, US

3 days ago Requisition ID: 1374

Department: Maintenance/Operations Support

Reports to: Maintenance Manager

Location: Langhorne, PA

Position Summary: The Storeroom Clerk is responsible for the accurate, organized, and efficient operation of the plant maintenance storeroom. This role manages the full lifecycle of parts and supplies in the storeroom: receiving, check-in, storage, issuing, check-out, cycle counting, and system recordkeeping. The Storeroom Clerk is a critical support function for maintenance and production - when a technician needs a part, it has to be where the system says it is.

A clean storeroom, accurate inventory records, and a reliable check-in/check-out process are not housekeeping tasks - they are the foundation of the plant's maintenance reliability program. This role owns all three.

Compensation

The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. At ND Paper, it is not typical for an individual to be hired at the high end of the range for their role, and compensation decisions are dependent upon the facts and circumstances of each position and candidate.

About Us

ND Paper is a leading manufacturer of high-quality pulp, paper, and packaging products in the United States, generating over half a billion dollars in annual sales. As a wholly owned subsidiary of Nine Dragons Paper (Holdings) Limited - the largest containerboard producer in the world – ND Paper is part of a global network committed to excellence and innovation. With two integrated pulp and paper mills in Rumford, Maine and Biron, Wisconsin, a packaging plant in Sturtevant, Wisconsin, and two sheeting facilities in Langhorne, Pennsylvania and Fairmont, West Virginia, the ND Paper family produces nearly one million tons of products annually. Our 1,100 dedicated employees are the heart of our operations, and we are committed to fostering positive work environments where individuals can advance and thrive. At ND Paper, we are investing in our future, and that starts with our staff.

Key Responsibilities & Expected Results:

• Demonstrate safety as a core value and establish a safe work environment by actively leading the safe execution of work.
• Responsible for receiving, inspecting, documenting, categorizing, labeling, and organizing spare parts delivered with each new equipment installation, ensuring accurate inventory records and proper storage locations. Applies to the 110-inch BHC corrugator, three flexos, and two rotary die cutters.

Parts Check-In

• Receive all incoming parts, supplies, and materials for the storeroom; verify delivery against the purchase order before accepting.
• Inspect incoming parts for correct part number, quantity, condition, and packaging integrity - reject or flag discrepancies immediately; do not shelve unverified parts.
• Log every receipt into the inventory system on the day of arrival: part number, description, quantity, vendor, PO number, and bin location.
• Apply part identification labels and bin location tags before putting any item away.
• Notify Maintenance of any backordered or substituted parts that differ from what was ordered.
• Process return-to-vendor items per purchasing procedure; document reason and quantity.

Parts Check-Out & Issuance

• Issue parts only against a work order, PM task, or authorized request - no parts leave the storeroom without a logged transaction.
• Record every check-out in the inventory system at the time of issuance: part number, quantity, requestor name, work order or equipment number, and date/time.
• Verify that the part being issued matches what was requested - part number, size, and specification.
• Track parts that are issued as loaners or temporary pulls; follow up to ensure return or write-off within the agreed timeframe.
• Flag and document any part issued as a substitute when the original is out of stock; notify Maintenance Supervisor so the original can be reordered.
• At shift end, reconcile any open transactions from the day - no unlogged issues carry over to the next day.

Cycle Counts

Cycle counting is a core daily responsibility - not an end-of-year event. The goal is to catch discrepancies early, correct system records promptly, and maintain inventory accuracy above the plant's target threshold at all times.

Frequency

Scope

Method & Documentation

Daily

All parts issued or received that day; any bin that was touched during the shift; high-turnover consumables (belts, bearings, filters, lubricants, sensors)

Physical count vs. system quantity; log variances same day; correct system records before end of shift

One full storeroom section or aisle (rotated so all sections are covered over the month); all critical and high-value parts regardless of section

Blind count (count before checking system); record count; compare to system; document and investigate variances > 1 unit or > $50 value

Monthly

Full storeroom - every bin location, every part number; includes floor stock, consignment inventory, and any parts staged outside the storeroom

Full physical inventory; reconcile system to count; present variance report to Maintenance Supervisor and Finance; all adjustments require Maintenance Supervisor and Finance sign-off before posting

• Document all count results on the cycle count log (paper and system); do not adjust inventory records without logging the discrepancy and its probable cause.
• Investigate root cause of recurring variances - phantom inventory, misplaced parts, and uncoded issues. Escalate patterns to General Manager.
• Parts that cannot be located after two consecutive counts are flagged as missing and escalated; do not carry phantom inventory.
• Maintain storeroom in clean, organized condition at all times - not just at end of shift. A technician pulling a part at 2 AM should find the storeroom in the same condition as during day shift.
• Every bin location is labeled; every part on the shelf has a label matching the system record. No unlabeled parts, no mystery bins.
• Parts are stored in their designated locations - no temporary staging that becomes permanent. If a part has no home, assign one and update the system.
• Hazardous materials (lubricants, solvents, aerosols) are stored in compliance with SDS requirements and separated from other inventory.
• Conduct a storeroom sweep at the end of each shift: returned parts put away, floor clear, shelves faced, trash removed.
• Identify and flag obsolete, damaged, or expired parts for disposition - do not let dead inventory occupy space that active parts need.
• Maintain the storeroom to a standard that would pass an unannounced walk-through by plant leadership at any time.

System Recordkeeping

• The inventory system is the source of truth - if it is not in the system, it does not exist. Every transaction is logged same day, no exceptions.
• Maintain accurate part master records: part number, description, unit of measure, bin location, min/max levels, and preferred vendor.
• Flag parts that are approaching minimum stock levels; initiate reorder request to Taylor before stockout occurs.
• Keep vendor and lead time information current - if a vendor or part number changes, update the system record immediately.
• Generate and distribute the weekly inventory status report to Maintenance Supervisor: low-stock items, pending receipts, open variances, and parts flagged for disposition.
• Support any CMMS integration or transition by maintaining clean, consistent data - field naming, part numbering, and unit of measure standards must be applied uniformly.
• Process parts requisitions for Maintenance Supervisor’s review and approval; provide accurate part numbers, quantities, and vendor information.
• Follow up on open purchase orders that are past expected delivery date; communicate status to Taylor.
• Maintain vendor contact information and lead time data in the storeroom records.
• Do not place orders or commit to purchases without General Manager authorization - the Storeroom Clerk supports purchasing, does not own it.

Safety & Compliance

• Follow all plant safety policies while working in the storeroom and on the plant floor for parts delivery.
• Maintain current SDS documentation for all hazardous materials stored in the storeroom; binder must be accessible and up to date.
• Use proper lifting technique and material handling equipment for heavy parts; request assistance for items over 50 lbs.
• Report any storeroom safety hazard - spills, damaged shelving, blocked egress - to Maintenance Supervisor immediately.

Performance Metrics

Targets will be established after a 60-90 day baseline period. The following metrics are tracked weekly and reviewed with General Manager and Maintenance Supervisor monthly.

Metric

Description

Inventory Accuracy Rate

% of bin locations where physical count matches system record; measured via cycle counts

Cycle Count Completion Rate

% of scheduled daily, weekly, and monthly counts completed on time

% of receipts and issues logged in the system on the day they occur

Stockout Frequency

Number of times a requested part was not available due to inventory error (not a planned shortage)

Variance Resolution Time

Average time from variance identified to root cause documented and record corrected

Number of times a reorder request was initiated before stockout vs. after

Storeroom Condition Score

Result of weekly walk-through assessment: labeling, organization, cleanliness, hazmat compliance

Qualifications and Skills /Education and Experience

Required

• High school diploma or GED.
• 1-3 years of experience in a storeroom, warehouse, or inventory control role - manufacturing environment preferred.
• Comfort with inventory management systems or basic database entry; ability to learn new software quickly.
• Strong attention to detail - part number accuracy, quantity accuracy, and location accuracy are non-negotiable in this role.
• Organized and self-directed; able to manage a daily count schedule without being reminded.
• Basic math skills; ability to reconcile counts and identify variances.
• Reliable and consistent - storeroom accuracy depends on the same process being followed every day, not most days.

Preferred

• Experience in a corrugated, packaging, or industrial manufacturing storeroom.
• Familiarity with maintenance parts categories: bearings, belts, seals, lubricants, electrical components, pneumatic fittings.
• Experience with a CMMS (computerized maintenance management system) or ERP inventory module.
• Forklift or pallet jack certification.
• Bilingual English/Spanish a plus given workforce composition.

Physical Requirements

• Ability to stand, walk, bend, and reach for extended periods in a storeroom and plant floor environment.
• Lift up to 50 lbs regularly; use material handling equipment for heavier items.
• Work in a manufacturing environment with noise, dust, and temperature variation.
• Day shift; occasional schedule flexibility may be required to support maintenance activities.