Steamfitter

Youngstown State University's Excellence Training Center

Youngstown (OH)

On-site

USD 65,000 - 95,000

Full time

39 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Youngstown State University’s Excellence Training Center seeks a skilled steamfitter to install, maintain, and repair steam, hot water, chilled water, and related piping systems at the Central Utility Plant in Youngstown. The role requires diagnosing malfunctions, performing preventative maintenance, and ensuring compliance with safety standards and building codes.

The successful candidate will monitor water quality, maintain logs, and perform routine inspections of tunnels, vaults, and

Qualifications

  • Five years of experience on commercial/industrial HVAC piping systems.
  • Valid U.S. driver’s license and EPA Section 608 certification preferred.
  • Ability to read blueprints and interpret technical manuals.

Responsibilities

  • Perform maintenance and repair on central utility plant equipment.
  • Install, test, and repair steam, hot water, and cooling piping systems.
  • Maintain logs, comply with safety codes, and coordinate with other trades.

Skills

Steamfitting
Pipefitting
Preventive maintenance
Troubleshooting

Education

High School Diploma or GED

Tools

Welding
Pipe threading
Blueprints

Job description

Summary Of Position

Under general supervision, performs skilled steamfitter work involving the installation, maintenance, repair, testing, and operation of steam, hot water, chilled water, compressed air, gas, and other piping systems. Diagnoses system malfunctions, performs preventative maintenance, and ensures compliance with applicable safety standards, codes, and regulations.

Position Information
Essential Functions and Responsibilities
  • 50% - Performs preventative maintenance and repair on all central utility equipment in the Central Utility Plant. Monitors water quality in the Central Utility Plant steam production center and maintains chemical levels in day tanks for chemical feed system. Performs diagnostic testing and resolves issues with all Central Utility Plant equipment. Maintains tools, and associated material involved in the performance of these duties. Maintains all rotating equipment in the Central Utility Plant and performs regular maintenance, inspection, and repair of such equipment. Maintains Campus Central Utility Plant Cooling towers including but not limited to, preseason cleaning, piping repair, regular daily inspections, and winterization. Performs routine inspections of the entire Central Utility Distribution network via tunnels, mechanical rooms, and vaults. Ensures that all tunnels and vaults are free of debris, water, and are properly maintained. Performs maintenance on utility systems including but not limited to, condensate return systems, gate valves, globe valves, check valves, gauges, and tunnel ventilation systems. Communicates issues with utility infrastructure to supervisor and administration as needed to maintain satisfactory functional status. Performs regular logging of university central utility equipment including but not not limited to the main campus boilers, deaerator, surge tank, main campus chillers, associated pumps, steam distribution systems, and absorption chiller. Maintains all logs according to state boiler code; prepares reports for state and insurance boiler inspectors. Maintains log of condensate return percentage and plant performance.
  • 30% - Installs, maintains, repairs, and replaces steam, condensate, hot water, chilled water, compressed air, and process piping systems. Fabricates, assembles, and installs piping, valves, fittings, supports, and related mechanical components from blueprints, schematics, and specifications. Inspects, tests, troubleshoots, and repairs steam traps, pumps, heat exchangers, pressure-reducing stations, boilers, and related equipment. Operates welding, cutting, threading, grooving, soldering, and brazing equipment as required. Performs preventive and predictive maintenance on mechanical systems and equipment. Diagnoses and resolves equipment failures, pressure issues, leaks, and system inefficiencies. Reads and interprets construction drawings, blueprints, piping diagrams, and technical manuals.
  • 20% - Installs and maintains insulation, expansion joints, valves, gauges, and control equipment associated with steam and piping systems. Conducts pressure testing and inspection of piping systems to ensure proper operation and code compliance. Responds to emergency maintenance calls and assists in restoring facility operations. Maintains records of work performed, materials used, inspections, and maintenance activities. Assists with planning and estimating labor and material requirements for projects and repairs. Adheres to all safety policies, lockout/tagout procedures, confined space requirements, and applicable building and mechanical codes. Coordinates work with other trades, contractors, and facility personnel.
Other Functions and Responsibilities

Trains new hires. Performs other duties as assigned and/or required that are within the level of responsibility for this classification at the discretion of the supervisor.

Equipment Operated

Computer and all other standard office equipment; pipe threading machines; welding and cutting equipment; pipe benders; grooving machines; lifts; hand and power tools; pressure testing equipment; pumps; gauges; meters; forklifts; service vehicles; and other equipment associated with steamfitting and mechanical maintenance activities.

Work Schedule

Typically, forty hours per week; may require overtime, evening, weekend, holiday, and emergency call-back work to support facility operations.

Primary Location

Youngstown

Supervision Exercised

May exercise supervision over student employees.

Reports to

Director, Facilities Engineering

Qualifications And Competencies
Required Certifications, Training, and/or Licensures
  • Certificate of Completion- Boiler Room Essentials- Full Steam Ahead upon hire; universal technician certification issued by EPA approved certifying organization per Section 608 of Clean Air Act developed after hire. Valid driver’s license.
Sponsorship and/or Work Authorization Status

This position is not eligible for sponsorship.

Knowledge, Skills, And Abilities
Knowledge of
  • steam generation and distribution systems; pipefitting and steamfitting methods, materials, and practices; mechanical systems including pumps, valves, heat exchangers, boilers, and pressure vessels; occupational safety procedures and regulations; applicable plumbing, mechanical, and building codes; blueprint and schematic interpretation; preventative maintenance principles and practices.
Skill in
  • diagnosing and repairing steam and piping system failures; welding, brazing, soldering, threading, cutting, and pipe fabrication; using precision measuring devices and diagnostic instruments; reading and interpreting blueprints and technical documents; prioritizing maintenance and repair activities; maintaining accurate work records.
Ability to
  • install, repair, and maintain complex piping systems; work independently and as part of a team; troubleshoot mechanical system malfunctions; follow written and verbal instructions; perform mathematical calculations related to layout, measurement, and fabrication; communicate effectively with supervisors, coworkers, contractors, and customers; work safely in potentially hazardous environments.

(*) Developed after employment.

Minimum Qualifications

High School Diploma or GED; at least five years of experience working on Commercial/Industrial HVAC systems and associated piping systems and practices. Commercial/Industrial HVAC includes a combined 600 horsepower or greater boilers, chillers providing a combined 600 tons or more of cooling, and air handling units providing greater than 30,000 CFM’s and experience with Direct Digital Controls (DDC); current and valid U.S. driver’s license.

Preferred Qualifications

EPA Section 608 Universal Certification; Niulpe 1st class engineer or 3rd class Ohio Stationary Engineer License. Experience with YORK YK- Centrifugal Chillers and Cleaverbrooks CBEX-E Firetube boilers in excess of 1,000 tons and 1,000 BHP respectively.

Physical Requirements

In accordance with the U.S. Department of Labor physical demands strength ratings, this position will perform heavy work.

HEAVY

work involves exerting 50 to 100 pounds of force occasionally, or 25 pounds of force constantly to move objects.

Unusual Working Conditions

Exposed to dirt, high and low temperatures, loud noise and dangerous equipment; may work in tight or confined area; may work outside in unpleasant conditions.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Associate Director, Facilities
Associate Director, Facilities

Youngstown State University • Youngstown (OH)

On-site
USD 85,000 - 125,000
Boiler Tech I
Boiler Tech I

Ucmo • Warrensburg (MO)

On-site
USD 42,000 - 56,000
Boiler Tech I
Boiler Tech I

University of Central Missouri • Warrensburg (MO)

On-site
USD 52,000 - 76,000
Steamfitter
Steamfitter

University of Pittsburgh • Pittsburgh

On-site
USD 70,000 - 110,000
Facilities Mechanical Steamfitter Tech
Facilities Mechanical Steamfitter Tech

The Ohio State University Wexner Medical Center • Columbus (OH)

On-site
USD 40,000 - 60,000
Steam Plant Mechanic (Stationary Engineer)
Steam Plant Mechanic (Stationary Engineer)

Indiana State University • Terre Town (IN)

On-site
USD 24,000 - 34,000
Sick Leave
Life Insurance
Medical Coverage
+3
Facilities Technician II
Facilities Technician II

JACK Entertainment LLC • Oklahoma

On-site
USD 52,000 - 76,000
Facilities Technician II
Facilities Technician II

Jack Entertainment • Cleveland (OH)

On-site
USD 42,000 - 62,000
Steamfitter
Steamfitter

University of Pittsburgh • Pittsburgh

On-site
USD 60,000 - 90,000
Industrial HVAC Specialist
Industrial HVAC Specialist

Unity School Of Christianity • Unity Village (MO)

On-site
USD 34,440 - 45,460