Sr. SRAM Layout Design Engineer supporting Nvidia

Sustainable Talent

San Jose (CA)

On-site

USD 229,000 - 250,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Full benefits
PTO
Onsite in Santa Clara

Job summary

Sustainable Talent is partnering with NVIDIA to recruit a Senior SRAM Layout Design Engineer for the client team onsite in Santa Clara, CA.

This is a full-time (W-2) contract role. We offer competitive pay $110/hr - $120/hr based on experience, education, location, etc., and provide full benefits, PTO, and a great company culture!

You will manage SRAM layout, floorplanning, DRC/LVS checks, and collaborate with circuit, PnR, and foundry teams to ensure robust memory IP delivery.

Qualifications

  • BSEE or equivalent experience.
  • 10+ years of custom IC layout experience, including 5+ years in SRAM, memory IP layout.
  • Hands-on participation in advanced CMOS tech initiatives, preferably FinFET/GAA at 5nm, 3nm or smaller.
  • Solid grasp of SRAM and memory layout principles.
  • Extensive experience in Cadence Virtuoso applied to custom layout creation and assessment.
  • Extensive experience in DRC/LVS debugging using Calibre, ICV, or similar tools.
  • Experience with floor planning, block-level routing, macro assembly, pin planning, boundary management, and top-level verification.
  • Familiarity with advanced-node layout limitations and layout-dependent phenomena (LOD, density/fill, matching, shielding, EM, IR drop).
  • Ability to work with circuit, CAD, foundry, and integration teams.
  • Strong communication, ownership, and mentoring abilities.
  • Knowledge of layout automation or AI tools is a plus.

Responsibilities

  • Manage the complete custom layout process for SRAM bitcell arrays, periphery, test structures, and memory macros in advanced CMOS techs.
  • Develop and improve floorplans for SRAM and memory blocks, including array layout and power-grid design.
  • Carry out and debug DRC, LVS, ERC, antenna checks with Calibre, ICV, or similar workflows.
  • Support EM/IR reviews, power integrity, density/fill, DFM, and tape-out requirements.
  • Collaborate with circuit designers to convert schematics into layouts with matching and reliability targets.
  • Coordinate with PnR and integration teams to resolve top-level DRC/LVS, pin access, and routing issues.
  • Advance layout methodologies, checklists, and reusable practices for consistent memory IP delivery.
  • Work with foundry, CAD, and methodology teams on rules, deck behavior, waivers, and process constraints.
  • Review layouts and mentor junior engineers to raise quality and execution standards.

Skills

SRAM layout
Custom IC layout
Cadence Virtuoso
DRC/LVS debugging
Calibre/ICV
Floorplanning
Power integrity
Layout automation
Team collaboration
Mentoring

Education

BSEE or equivalent experience

Tools

Calibre
ICV

Job description

Sustainable Talent is partnering with NVIDIA, a global leader that has been transforming computer graphics, PC gaming, and accelerated computing for over 25 years. We are looking for a Senior SRAM Layout Design Engineer to support our client's team onsite in Santa Clara, CA.

This is a full-time (W-2) contract role. We offer competitive pay $110/hr - $120/hr based on factors like experience, education, location, etc. and provide full benefits, PTO, and amazing company culture!

What you'll do:

  • Manage the complete custom layout process for SRAM (Static Random-Access Memory) bitcell arrays, memory periphery, test structures, and memory macros in advanced CMOS technologies.
  • Develop and improve floorplans for SRAM and memory blocks, covering array layout, periphery positioning, power grid design, routing channels, and macro assembly.
  • Carry out, debug, and complete DRC, LVS, ERC, antenna, and associated physical verification checks with tools such as Calibre, ICV, or similar workflows.
  • Support EM/IR review, power integrity, density/fill, DFM, dummy insertion, layout-dependent effects, and other requirements for tape out.
  • Collaborate with circuit designers to convert schematics into layouts, ensuring matching, symmetry, shielding, parasitic targets, and reliability constraints are maintained.
  • Collaborate with PnR and integration teams to resolve top-level DRC/LVS, pin access, boundary, routing, power-grid, and macro-integration issues.
  • Implement and advance layout methodology, checklists, reusable practices, and quality standards for consistent memory IP delivery.
  • Collaborate with foundry, CAD, and methodology teams on rule interpretation, deck behavior, waivers, and advanced-node process constraints.
  • Review layouts, mentor junior engineers, and help raise layout quality and execution rigor across the team.

Key required skills:

  • Have a BSEE or equivalent experience
  • 10+ years of custom IC layout experience, including 5+ years in SRAM, memory compiler, or full-custom memory IP layout.
  • Hands-on participation in advanced CMOS technology initiatives, preferably concentrating on FinFET or GAA nodes at 5nm, 3nm, or smaller dimensions.
  • Solid grasp of SRAM and memory layout principles.
  • Extensive experience in Cadence Virtuoso applied to custom layout creation and assessment.
  • Extensive experience in DRC/LVS debugging using Calibre, ICV, or similar physical verification tools.
  • Experience with floor planning, block-level routing, macro assembly, pin planning, boundary/interface management, and top-level physical verification.
  • Direct familiarity with advanced-node layout limitations and layout-dependent phenomena, including LOD, density/fill, matching, symmetry, shielding, electromigration, IR drop, and DFM or similar expertise.
  • Ability to work effectively with circuit build, physical build, integration, CAD, and foundry teams.
  • Clear communication, strong ownership, good judgment, and the ability to mentor other engineers.
  • Knowledge of layout automation or AI tools is a definite plus.

Sustainable Talent is a M/F+, disabled, and veteran equal employment opportunity and affirmative action employer.

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Sustainable Talent's Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Voluntary Self-Identification of Disability

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor's Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp .

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your "major life activities." If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson's disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Principal Engineer - Flash Transition Layer (FTL)
Principal Engineer - Flash Transition Layer (FTL)

SKHMS Corporation • San Jose (CA)

Hybrid
USD 200,000 - 240,000
SSD Firmware Development Engineer Intern
SSD Firmware Development Engineer Intern

SKHMS Corporation • San Jose (CA)

Hybrid
USD 48,000 - 62,000
6‑month internship
Principal Analog Design Engineer | Irvine, CA
Principal Analog Design Engineer | Irvine, CA

Celero Communications, Inc. • Irvine (CA)

On-site
USD 150,000 - 250,000
AI Solution Architecture Director
AI Solution Architecture Director

SK hynix America • San Jose (CA)

On-site
USD 250,000 - 320,000
Top Tier health insurance at no cost
Paid day offs: PTO, company holidays,
401k Matching
+4
IC Package Engineer
IC Package Engineer

Etched • Cupertino (CA)

On-site
USD 120,000 - 160,000
Full medical, dental, and vision packages
Housing subsidy of $2,000/month
Daily lunch and dinner in-office
+1
3D Stacked DRAM - Logic Verification Engineer
3D Stacked DRAM - Logic Verification Engineer

SK hynix America • San Jose (CA)

On-site
USD 140,000 - 310,000
Health insurance
401k Matching
FSA for Health Care & Dependent Care
+8
CPU Core Design Verification Testbench Lead
CPU Core Design Verification Testbench Lead

Tenstorrent • Santa Clara (CA)

Hybrid
USD 180,000 - 240,000
Principal ASIC Package Design Engineer
Principal ASIC Package Design Engineer

K2 Space • Seattle (WA)

Hybrid
USD 200,000 - 280,000
Comprehensive benefits
Manager / Sr. Manager - Leadership & Organization Development - Bilingual in Korean
Manager / Sr. Manager - Leadership & Organization Development - Bilingual in Korean

SKHMS Corporation • San Jose (CA)

Hybrid
USD 140,000 - 180,000
Medical insurance
Dental insurance
Vision insurance
+4
Low-Power RTL Engineer for AI ASICs
Low-Power RTL Engineer for AI ASICs

Etched • Cupertino (CA)

On-site
USD 120,000 - 160,000
Full medical, dental, and vision packages
Housing subsidy of $2,000/month
Daily lunch and dinner in the office
+1