SHIPFITTER (MATERIAL HANDLER)

U.S. Fleet Forces Command

Georgia

On-site

USD 40,000 - 65,000

Full time

37 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

You will serve as a SHIPFITTER (MATERIAL HANDLER) in the Shipfitter Shop (11A), Hull Division (TRF 310), Repair Department (TRF 300), of TRIREFFAC KINGS BAY. Duties include reading blueprints, fitting submarine structural parts, and supporting refit operations.

Qualifications emphasize the ability to lay out, fabricate, assemble, and install metal parts, inspect incoming materials, and correctly identify material with NSN/NIIN. Requires US citizenship and DoD prerequisites.

Qualifications

  • Ability to lay out, fabricate, assemble, and install metal structural parts of submarines while performing related duties to support refit operations.
  • Ability to receive incoming materials from the supply department and perform inspections and verifications against drawings and TRIREFFAC-KB instructions.
  • Ability to ensure all material is identified with NSN/NIIN (or pseudo-NSN) on item or packaging.

Responsibilities

  • Lay out submarine structural parts from blueprints and templates, including watertight closures, shell, deck and bulkhead plates.
  • Chip and drill as required.
  • Cut, fit, assemble and install structural assemblies such as submarine sails.
  • Locate and mark reference lines and points like center lines and frame lines.

Job description

Summary

You will serve as a SHIPFITTER (MATERIAL HANDLER) in the Shipfitter Shop (11A), Hull Division (TRF 310), Repair Department (TRF 300), of TRIREFFAC KINGS BAY.

Summary

You will serve as a SHIPFITTER (MATERIAL HANDLER) in the Shipfitter Shop (11A), Hull Division (TRF 310), Repair Department (TRF 300), of TRIREFFAC KINGS BAY.

Duties
Help
  • You will work from blueprints and templates to lay out submarine structural parts such as watertight closures; shell, deck and bulkhead plates
  • You will perform required chipping and drilling.
  • You will cut, fit, assemble and install various structural assemblies, such as submarine sails.
  • You will locate and mark out reference lines and points such as center lines, buttock lines, and frame lines.
Requirements
Help
Conditions of employment
  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  • Males born after 12-31-59 must be registered for Selective Service.
  • This is a bargaining unit position.
  • Incumbent must be able to acquire and maintain Controlled Material Handler (CMH) qualifications. This position requires the incumbent to adhere to policy of the Drug Free Workplace Program and requires drug testing.
  • Must also be able to maintain an IT-II level designation. This position may require travel worldwide at which time additional medical screening may be required.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  • You will be required to obtain and maintain a current valid United States driver’s license.
  • You will be required to successfully complete a pre-appointment physical examination.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.

Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.

This Job Has a Screen-out Element Which Will Be Used To Determine Minimum Eligibility For This Job. Applicants Who Do Not Receive a Minimum Of Two Points On The Screen-out Element(s) Will Be Found Ineligible. The Screen-out Element For This Position Is

  • Ability to lay out, fabricate, assemble, and install various metal structural parts of submarines while performing related duties to support refit operations at TRIREFFAC-KB.
  • Ability to receive incoming materials from the supply department and perform inspections and verifications in accordance with system drawings and local TRIREFFAC-KB instructions, such as IPI-0610-130-00lA.
  • Ability to ensure all supply system material is correctly identified with the NSN/NIIN (or pseudo-NSN) applied directly to the item or its individual packaging.
  • Ability to segregate material undergoing receipt inspection by utilizing appropriate signs and physical barriers.
  • Ability to review material documentation to identify and verify the Job Control Number, typically located on the Material Movement Document.
  • Ability to receive unused, less-than-issue unit quantities of hazardous material from work center personnel.
  • Ability to identify, quantify, and properly store hazardous material for future use, or safely transfer it to the Satellite Accumulation Area.
  • Ability to determine receipt inspection requirements using the Automated Work Request (AWR) Job Material List (JML).
  • Ability to identify whether material requires a designated Quality Assurance inspection or a shop inspection, ensuring all evaluations comply with applicable guidelines.

Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Additional information

This position is covered by the Department of Defense Priority Placement Program.

Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

PPP

applicants will be placed at the FPL, if determined well qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.

ICTAP Applicants

To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/

Military Spouse Preference

applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

FABRIC WORKER
FABRIC WORKER

U.S. Fleet Forces Command • San Diego (CA)

On-site
USD 50,000 - 80,000
ELECTRONICS WORKER.
ELECTRONICS WORKER.

U.S. Pacific Fleet • Bremerton (WA)

On-site
USD 55,000 - 85,000
MAINTENANCE MECHANIC.
MAINTENANCE MECHANIC.

Naval Education and Training Command • Eglin Air Force Base (FL)

On-site
USD 42,000 - 54,000
POSTURE PLANS ANALYST.
POSTURE PLANS ANALYST.

U.S. Pacific Fleet • Honolulu (HI)

On-site
USD 80,000 - 110,000
TEMPORARY SERVICES SHOPS SUPERVISOR I.
TEMPORARY SERVICES SHOPS SUPERVISOR I.

U.S. Pacific Fleet • Bremerton (WA)

On-site
USD 40,000 - 60,000
COMBINED TRADES SUPERVISOR I.
COMBINED TRADES SUPERVISOR I.

U.S. Pacific Fleet • Bremerton (WA)

On-site
USD 90,000 - 130,000
SUPERVISORY GENERAL ENGINEER.
SUPERVISORY GENERAL ENGINEER.

U.S. Pacific Fleet • Everett (WA)

On-site
USD 110,000 - 140,000
ADMINISTRATIVE SUPPORT ASSISTANT (OA)
ADMINISTRATIVE SUPPORT ASSISTANT (OA)

U.S. Fleet Forces Command • Portsmouth (VA)

On-site
USD 42,000 - 64,000
NUCLEAR CONTINUING AND TRAINING DEVELOPMENT COORDINATOR
NUCLEAR CONTINUING AND TRAINING DEVELOPMENT COORDINATOR

U.S. Fleet Forces Command • Portsmouth (VA)

On-site
USD 70,000 - 90,000
ELECTRONICS TECHNICIAN.
ELECTRONICS TECHNICIAN.

Naval Sea Systems Command (NAVSEA) • Bath (ME)

On-site
USD 85,000 - 120,000