Senior/Principal Hardware Engineer – High-Speed RF / Signal Integrity (On-site)

Polaris Electro-Optics, Inc.; Carlsbad (CA); On-site; USD 140,000 - 210,000; Full time

Job summary

Polaris Electro-Optics, Inc. in San Diego seeks a Senior/Principal Hardware Engineer to own high-speed electrical implementation and signal-integrity validation for next-gen optical interconnect hardware.

This hands-on role interfaces with photonics, systems, packaging and test teams to translate requirements into robust interfaces and bring them through design, fabrication, bring-up, and qualification. You will collaborate with OSATs, substrate and PCB vendors, and high-speed component partners

Qualifications

• Significant industry experience in high-speed hardware and signal-integrity design.
• Strong background in signal integrity for multi-tens-of-GHz interfaces.
• Experience designing and bringing up high-speed PCBs with low-loss/hybrid RF stack-ups.
• Deep understanding of differential signaling, impedance control, reflections, crosstalk, and power integrity.
• Experience with S-parameters, VNA measurements, oscilloscopes, and RF test equipment.
• Familiarity with SI/EM tools such as Ansys HFSS, Cadence Sigrity, or equivalent.

Responsibilities

• Design high-speed PCBs and contribute to substrate/SLP electrical interface definition for >100 GBaud-class signaling.
• Collaborate with OSATs and substrate vendors on stack-up, routing constraints, and high-speed performance.
• Own architecture and implementation of high-speed electrical interfaces and RF hardware for optical interconnect systems.
• Perform pre-layout and post-layout SI analysis using S-parameters, channel and electromagnetic simulations.
• Define high-speed interfaces between test equipment, MZM drivers, TIAs, photonic modules, and host electronics.
• Work with photonics, packaging, systems, and test engineers to optimize electrical/optical co-design.
• Lead high-speed board bring-up, debug, characterization, and failure analysis.
• Define and execute qualification plans for high-speed PCB/substrate interfaces (IL, RL, crosstalk, impedance, skew).

Skills

High-speed hardware design

Signal integrity analysis

PCB design

RF/interconnect

SI tools

Lab debugging

S-parameters

Education

B.S./M.S./Ph.D. in Electrical Engineering

Tools

Ansys HFSS

Cadence Sigrity

SIwave

Job description

Polaris Electro-Optics is a rapidly growing photonics company developing breakthrough

optical interconnect technology for data centers, AI, and high-performance computing.

Their proprietary FenGlass™ platform integrates ferroelectric nematic materials into silicon

photonics, enabling faster, compact, and more energy-efficient solutions. Located in San

Diego and backed by substantial funding, Polaris is scaling to meet demand from hyperscale

customers and transceiver suppliers.

Role Summary

We are looking for a Senior or Principal Hardware Engineer to own the high-speed electrical implementation and signal-integrity validation of next-generation optical interconnect hardware.

This role is highly hands-on and focused on the RF and signal-integrity implementation of next-generation optical interconnect hardware. The engineer will work closely with internal photonics, systems, packaging, and test teams to translate system-level requirements into robust high-speed electrical interfaces and hardware, then carry those designs through simulation, fabrication, bring-up, characterization, and qualification.

The role will also serve as a key technical interface to OSATs, substrate and PCB vendors, connector suppliers, and high-speed component partners.

Responsibilities

• Design high-speed PCBs and contribute to substrate/SLP electrical interface definition for >100 GBaud-class signaling.
• Work with OSATs and substrate vendors on SLP stack-up, routing constraints, bump interfaces, manufacturability, and high-speed electrical performance.
• Own the architecture and implementation of high-speed electrical interfaces and RF hardware for optical interconnect systems.
• Perform pre-layout and post-layout SI analysis using S-parameters, channel simulation, and electromagnetic simulation as appropriate.
• Define high-speed interfaces between test equipment, MZM drivers, TIAs, photonic modules, and host electronics.
• Work closely with photonics, package, systems, and test engineers to optimize electrical/optical co-design.
• Lead high-speed board bring-up, debug, characterization, and failure analysis.
• Define and execute qualification plans for high-speed PCB and substrate interfaces, including insertion loss, return loss, crosstalk, impedance, skew, and signal-quality validation.

Qualifications

• B.S., M.S., or Ph.D. in Electrical Engineering or related field.
• Significant industry experience in high-speed hardware and signal-integrity design.
• Strong background in signal integrity for multi-tens-of-GHz electrical interfaces.
• Experience designing and bringing up high-speed PCBs using low-loss or hybrid RF stack-ups.
• Deep understanding of differential signaling, transmission lines, impedance control, reflections, loss, crosstalk, and power integrity.
• Experience with S-parameters, VNA measurements, oscilloscopes, high-speed pattern generators/BERTs, and related RF test equipment.
• Experience with one or more SI/EM tools such as Ansys HFSS/SIwave, Cadence Sigrity, or equivalent.
• Comfortable working hands-on in the lab and debugging first-of-kind hardware.
• Able to make technical decisions with incomplete information and rapidly converge toward a working system.

Preferred

• Experience with optical transceivers, silicon photonics, linear-drive optics, or SerDes interfaces.
• Experience with 50 GBaud or >100 GBaud PAM4 electrical links.
• Experience integrating linear MZM drivers and TIAs.
• Familiarity with IEEE 802.3, OIF CEI, or related datacom standards.