Senior PLC Controls Technician

Divcon Controls

Fargo (ND)

On-site

USD 85,000 - 120,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Growth opportunities
Medical/Dental/vision insurance
401(k) with employer match
Disability coverage
Flexible PTO
Field-based benefits

Job summary

Divcon seeks a Senior PLC Control Technician to lead startup, commissioning, and validation of complex PLC automation projects. You will troubleshoot advanced PLCs, SCADA integration, and industrial networks while guiding field technicians and coordinating with engineers, PMs, contractors, and vendors.

You will validate redundancy, sequencing, and high-availability architectures, including protocol gateways and Modbus/EtherNet/IP communications. Travel is required as part of project execution.

Qualifications

  • Minimum five (5) years hands-on PLC experience in industrial/construction/building automation.
  • Expert-level with Allen-Bradley; strong knowledge of Siemens/Schneider systems.
  • Experience configuring PLC redundancy, distributed I/O, high-availability architectures and network gateways.
  • Able to travel ~85% to project sites; OSHA 10 certification required or provided within first week.

Responsibilities

  • Lead commissioning activities for large-scale PLC projects, ensuring startup plans and specs are met.
  • Troubleshoot advanced PLC logic, distributed I/O, field instrumentation, and SCADA/HMI integration.
  • Configure and validate PLC redundancy, high-availability deployments, and related networks.
  • Configure and validate industrial protocols (Modbus, EtherNet/IP, BACnet, MQTT, OPC UA).
  • Integrate PLCs with SCADA/HMI platforms (Ignition, FactoryTalk, etc.) and verify point mapping.
  • Verify controller programs against design sequences and document discrepancies.
  • Perform point-to-point validation, sensor checks, and commissioning scripts.
  • Mentor and train junior technicians; review work quality and documentation.
  • Prepare redlines, as-built drawings, commissioning reports, and turnover packages.
  • Coordinate with project teams to align execution with safety and deliverables.
  • Apply AEC process knowledge to plans, specs, RFIs, and submittals.

Skills

Allen-Bradley PLCs
Siemens/Schneider
Industrial Networking
Ladder Logic
SCADA/HMI
Redundancy/HA
Mentoring
Troubleshooting PLCs

Tools

Studio 5000
FactoryTalk Linx
RSLinx Classic
RSNetWorx
FactoryTalk Activation
TIA Portal

Job description

The Senior PLC Control Technician is an expert-level, hands‑on professional responsible for leading complex commissioning activities, troubleshooting advanced PLC and industrial networking systems, validating PLC/SCADA integration, and mentoring field technicians. This role serves as a primary technical escalation resource for PLC field challenges while supporting high‑quality startup, integration, documentation, safety, and system reliability.

The Senior PLC Control Technician demonstrates mastery of PLC systems, industrial communication protocols, processor redundancy, distributed I/O, and SCADA/HMI integration while coordinating technical execution with Lead PLC Technicians, PLC Engineers, project managers, contractors, and vendors.

This position requires regular travel. Per diem, lodging, and travel accommodation are provided in accordance with company policy.

Key Responsibilities:
  • Lead commissioning activities for large-scale or technically complex PLC automation projects, ensuring systems operate according to design specifications, project requirements, and approved startup plans.
  • Troubleshoot advanced PLC logic, distributed I/O, field instrumentation, processor/controller issues, electrical faults, network communication issues, and SCADA/HMI integration problems in active operational environments.
  • Configure, test, and validate PLC processor redundancy, failover, high‑availability deployments, and related communication architecture where required by project scope.
  • Configure, test, and validate industrial communication protocols, including Modbus/IP, Modbus/UDP, EtherNet/IP, BACnet, MQTT, OPC UA, and project‑specific gateway integrations.
  • Integrate PLC systems with SCADA/HMI platforms such as Ignition, FactoryTalk, and similar operator interfaces, ensuring seamless communication, correct point mapping, alarm/trend visibility, and operational functionality.
  • Verify controller programs against design sequences or functional requirements, document discrepancies for engineering resolution, and perform authorized troubleshooting or minor configuration support.
  • Perform or support point‑to‑point validation, sensor/device verification, panel wiring assessment, field instrumentation checks, commissioning scripts, and issue tracking for PLC‑supported systems.
  • Mentor and train PLC Control Technicians by providing technical guidance, reviewing work quality, supporting troubleshooting, and quality‑checking documentation.
  • Prepare and maintain accurate redlines, as‑built documentation, commissioning reports, QC checklists, startup records, failover test records, and turnover deliverables.
  • Coordinate with Lead PLC Technicians, PLC Engineers, project managers, contractors, vendors, and clients to align technical execution with project objectives, safety expectations, and deliverables.
  • Apply working knowledge of AEC processes and construction documents, including plans, specifications, controls submittals, equipment submittals, RFIs, and submittal processes.
Qualifications:
  • · Minimum five (5) years of hands‑on experience with PLC systems in industrial, construction, or building automation environments.
  • Expert‑level proficiency with Allen‑Bradley PLC platforms, with strong working knowledge of Siemens and Schneider Electric systems.
  • Mastery or advanced working knowledge of tools such as Studio 5000, FactoryTalk Linx, RSLinx Classic, RSNetWorx, FactoryTalk Activation Manager, Siemens TIA Portal, or comparable PLC software.
  • Demonstrated expertise configuring and validating PLC processor redundancy systems, distributed I/O, industrial networking, protocol gateways, and high‑availability architectures.
  • Ability to read ladder logic fluently and interpret contacts, coils, timers, counters, comparison instructions, tag databases, I/O binding, alarm/trend configuration, and sequence modules.
  • Ability to read, interpret, and apply electrical schematics, network diagrams, mechanical plans, equipment submittals, controls submittals, point lists, and construction documentation.
  • Proven leadership, mentorship, communication, troubleshooting, and documentation skills, with ability to guide field technicians and coordinate with project teams.
  • Willingness and ability to travel to project sites as required, approximately 85%.
  • OSHA 10 certification obtained within the past two (2) years is required.
  • If certification is not current or has not been completed, OSHA 10 training will be provided and must be successfully completed within the first week of employment.
Experience:
  • Demonstrated experience leading commissioning, startup, and system validation activities for large‑scale or technically complex PLC automation projects.
  • Proven experience troubleshooting advanced PLC systems, distributed I/O networks, field instrumentation, SCADA/HMI integration, and communication issues in live operational environments.
  • Hands‑on experience supporting system redundancy, failover testing, high‑availability deployments, and system acceptance activities.
  • Experience serving as a technical escalation resource for complex field issues and coordinating field activities with engineers, project managers, contractors, vendors, and clients.
  • Experience developing and maintaining as‑built drawings, redline documentation, commissioning reports, system turnover packages, issue logs, and QC documentation.
  • Experience mentoring junior technicians and providing on‑the‑job technical training.
Physical Requirements:
  • Ability to travel by plane or vehicle up to 95% based on work site locations.
  • Ability to stand, walk, and move throughout active construction sites for extended periods
  • Ability to climb ladders, stairs and lifts as required
  • Ability to bend, kneel, crouch, and work in tight or confined spaces
  • Ability to lift, carry, and maneuver equipment and materials up to 50 pounds
  • Manual dexterity to handle tools, wiring, and small components
  • Ability to work at heights and in varying indoor and outdoor conditions
  • Visual keenness to read schematics, labels, and digital displays
  • Ability to hear and respond to alarms, equipment sounds, and verbal instructions
  • Capability to safely operate hand and power tools
Benefits & Total Rewards:
  • Opportunities for Growth

Hands‑on trainingandcareeradvancementin an explodingdata‑centerindustry.

  • Medical, Dental, and Vision Insurance

Wecover100% ofindividualmedicalpremiumsandhelp offset the cost of family coverage.

  • 401Kwith Employer Match

Eligible after 90 days, with company matching to help youinvest in your future.

  • Disability Coverage

Bothshort- and long‑term disability insuranceprovidedatnocostto our employees.

  • FlexiblePTO

Taketime off when you need it, noaccruing time necessary.

  • Field‑Based Employee Benefits

For eligible field‑based roles that require travel, Divcon covers all business travel expenses and provides a per diem, phone allowance, tools, and PPE at no cost. Eligible employees also receive paid training and additional reimbursable business expenses.

About Us:

Headquartered in Dallas, Texas, Divcon delivers fully integrated automation solutions nationwide that optimize performance, energy efficiency, and reliability across HVAC, lighting, power monitoring, and mission‑critical systems. Leveraging advanced technologies - including Allen‑Bradley PLCs, Ignition SCADA, and Delta DDC systems - we combine deep technical expertise with field‑tested execution to deliver precise, scalable, and high‑performance solutions.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior PLC Control Technician
Senior PLC Control Technician

Divcon Controls • United States

Hybrid
USD 90,000 - 130,000
Growth opportunities
Medical, Dental, and Vision Insurance
401K with Employer Match
+3
Senior PLC Commissioning Technician: HV PLCs & SCADA
Senior PLC Commissioning Technician: HV PLCs & SCADA

Divcon Controls • United States

Hybrid
USD 90,000 - 130,000
Growth opportunities
Medical, Dental, and Vision Insurance
401K with Employer Match
+3
Field PLC Engineer
Field PLC Engineer

Divcon Controls • Dallas (TX)

Hybrid
USD 90,000 - 120,000
Medical, dental, and vision insurance
401K with employer match
Disability insurance
+2
Field PLC Engineer
Field PLC Engineer

Divcon • United States

Remote
USD 90,000 - 140,000
Medical, Dental, and Vision Insurance
401K with Employer Match
Disability Coverage
+2
Senior PLC Field Technician - Travel-Heavy Automation Lead
Senior PLC Field Technician - Travel-Heavy Automation Lead

divcon • Texas

Remote
USD 80,000 - 100,000
Technical Project Manager
Technical Project Manager

Divcon • Irving (TX)

On-site
USD 90,000 - 140,000
Growth opportunities
Health insurance
401K match
+3
Technical Project Manager
Technical Project Manager

Divcon Controls • Irving (TX)

On-site
USD 110,000 - 150,000
Growth opportunities
Medical, Dental, Vision Insurance
401K with Employer Match
+3
Engineering Project Coordinator
Engineering Project Coordinator

Divcon Controls • Irving (TX)

On-site
USD 52,000 - 72,000
Growth opportunities
Medical Insurance
401K with Employer Match
+3
Engineering Project Coordinator
Engineering Project Coordinator

Divcon • Irving (TX)

On-site
USD 52,000 - 76,000
Opportunities for Growth
Medical/Dental/Vision Insurance
401K with Employer Match
+3
Controls Technician
Controls Technician

Divcon Controls • North Dakota

On-site
USD 55,000 - 90,000
Opportunities for Growth
Medical, Dental, Vision Insurance
401K with Employer Match
+3