Senior Mechanical Engineer – Piping Design & Liquid Cooling

GTN Technical Staffing

Dallas (TX)

On-site

USD 120,000 - 180,000

Full time

2 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Relocation package

Job summary

GTN Technical Staffing is seeking a Senior Mechanical Engineer specialized in data center piping and liquid cooling. The role covers hydraulic modeling, pipe stress, CDU integration, and commissioning for high-density HPC/AI cooling systems.

You will exercise Engineer of Record responsibilities and collaborate with vendors, design authorities, and commissioning teams. The candidate should hold a PE license with ABET-accredited mechanical engineering foundation and 7–10+ years of hands-on piping

Qualifications

  • Bachelor's degree in Mechanical Engineering from an ABET-accredited program or equivalent.
  • Professional Engineer (PE) license, supporting Engineer of Record responsibilities for piping design, testing, and commissioning documentation.
  • 7-10+ years of mechanical engineering experience, including hands-on chilled water or process piping design.
  • Proficiency with CAESAR II, AutoPIPE, or equivalent pipe stress analysis software.
  • Working knowledge of ASME B31.3 and B31.9.
  • Experience hydraulic modeling, NPSH calculations, friction-loss analysis, and thermal expansion assessments.
  • Experience specifying materials compatible with glycol, dielectric fluids, treated water, and absorption chiller solutions.
  • Experience coordinating BIM layouts and resolving clashes before construction.
  • Experience writing and witnessing pressure-testing and flushing procedures.
  • Experience verifying valve and pump VFD response during commissioning.

Responsibilities

  • Perform hydraulic modeling, pressure-drop calculations, Net Positive Suction Head (NPSH) analysis, and pipe sizing.
  • Specify pipe diameter, wall thickness, and materials based on operating conditions, fluid properties, and applicable requirements.
  • Use CAESAR II, AutoPIPE, or equivalent tools to evaluate thermal stress and expansion.
  • Design expansion joints, loops, anchors, and supports to accommodate operating loads and temperature changes.
  • Validate system performance through engineering analysis and documented calculations.
  • Design chilled water, condenser water, and secondary technology cooling loops.
  • Integrate Coolant Distribution Units (CDUs) between facility cooling infrastructure and high-purity rack cooling circuits.
  • Account for absorption and electric chiller plants with different pressure, temperature, and turndown characteristics.
  • Coordinate piping and controls interfaces with equipment vendors and Controls Engineering.
  • Support direct-to-chip, immersion, and other liquid cooling configurations as applicable.
  • Develop and witness hydrostatic and pneumatic pressure-testing procedures.
  • Establish flushing and cleanliness protocols appropriate for sensitive liquid cooling equipment and cold plate passages.
  • Support Level 4/5 functional testing of flow control valves, balancing valves, and pump VFDs.
  • Document results, resolve deficiencies, and provide required commissioning sign-off.

Skills

Hydraulic modeling
NPSH analysis
Pressure testing
Thermal expansion analysis
Pipeline design
Cross-functional coordination
Documentation & commissioning

Education

ABET-accredited Mechanical Engineering degree
Professional Engineer (PE) license
Master's degree (preferred)

Tools

CAESAR II
AutoPIPE
BIM/Revit
ASME B31.3/B31.9

Job description

Senior Mechanical Engineer - Data Center Piping & Liquid Cooling

Compensation: Competitive Base Salary + Bonus

Relocation: Relocation Package Available for Non-Local Candidates

Overview

Our client, a growing high-performance computing and cloud infrastructure company, is seeking a Senior Mechanical Engineer - Data Center Piping & Liquid Cooling to design, analyze, and commission fluid distribution systems supporting advanced data center cooling infrastructure.

This hands-on role owns piping engineering from hydraulic modeling and material selection through routing, pressure testing, and operational acceptance. Systems include chilled water, condenser water, glycol, and technology cooling loops serving high-density AI and HPC environments.

The engineer will support campuses using both waste-heat-driven absorption chilling and electric chiller plants, accounting for differences in operating temperature, pressure, fluid chemistry, and load response.

Working closely with the Principal Engineer / Design Authority, engineering disciplines, chemical consultants, vendors, and commissioning teams, this individual will deliver piping systems that maintain flow, protect equipment, and isolate failures without compromising critical cooling. The role includes Engineer of Record responsibilities and commissioning sign-off authority.

Key Responsibilities
Hydraulic Design & Pipe Stress Analysis
  • Perform hydraulic modeling, pressure-drop calculations, Net Positive Suction Head (NPSH) analysis, and pipe sizing.
  • Specify pipe diameter, wall thickness, and materials based on operating conditions, fluid properties, and applicable requirements.
  • Use CAESAR II, AutoPIPE, or equivalent tools to evaluate thermal stress and expansion.
  • Design expansion joints, loops, anchors, and supports to accommodate operating loads and temperature changes.
  • Validate system performance through engineering analysis and documented calculations.
  • Design chilled water, condenser water, and secondary technology cooling loops.
  • Integrate Coolant Distribution Units (CDUs) between facility cooling infrastructure and high-purity rack cooling circuits.
  • Account for absorption and electric chiller plants with different pressure, temperature, and turndown characteristics.
  • Coordinate piping and controls interfaces with equipment vendors and Controls Engineering.
  • Support direct-to-chip, immersion, and other liquid cooling configurations as applicable.
Fluid Quality & Material Compatibility
  • Specify side-stream filtration, strainers, and air separation to maintain fluid quality and protect cold plate channels.
  • Partner with chemical consultants on closed-loop water treatment, biocidal dosing, and corrosion inhibition.
  • Verify compatibility of piping, gaskets, seals, and equipment with treated water, glycol, dielectric fluids, and absorption chiller solutions.
  • Identify corrosion, contamination, and material compatibility risks before procurement and construction.
Piping Layout & Failure Isolation
  • Develop and coordinate large-bore piping routes using BIM/Revit.
  • Resolve conflicts with electrical busways, cable trays, structural steel, and other infrastructure.
  • Design isolation valve arrangements and double block and bleed strategies to contain leaks while preserving cooling availability.
  • Validate valve matrices and operating sequences against project-specific N+1 or 2N redundancy requirements.
  • Coordinate piping layouts with structural supports, equipment access, and maintenance needs.
  • Develop and witness hydrostatic and pneumatic pressure-testing procedures.
  • Establish flushing and cleanliness protocols appropriate for sensitive liquid cooling equipment and cold plate passages.
  • Support Level 4/5 functional performance testing of flow control valves, balancing valves, and pump Variable Frequency Drives (VFDs).
  • Verify system response during simulated load reductions, equipment failures, and isolation events.
  • Document results, resolve deficiencies, and provide required commissioning sign-off.
Technical Documentation & Procurement Support
  • Serve as Engineer of Record for piping design, testing protocols, and commissioning documentation.
  • Prepare technical specifications and review vendor submittals for alignment with design intent.
  • Maintain technical scope and commercial pricing as separate procurement documents.
  • Communicate fluid system risks, design decisions, and acceptance requirements to commissioning teams and project leadership.
Required Qualifications
  • Bachelor's degree in Mechanical Engineering from an ABET-accredited program or equivalent.
  • Professional Engineer (PE) license, supporting Engineer of Record responsibilities for piping design, testing, and commissioning documentation.
  • 7-10+ years of mechanical engineering experience, including hands-on chilled water or process piping design.
  • Proficiency with CAESAR II, AutoPIPE, or equivalent pipe stress analysis software.
  • Working knowledge of ASME B31.3 and B31.9.
  • Demonstrated experience performing hydraulic modeling, NPSH calculations, friction-loss analysis, and thermal expansion assessments.
  • Experience specifying materials compatible with glycol, dielectric fluids, treated water, and absorption chiller solutions.
  • Experience designing isolation and double block and bleed arrangements that limit the impact of a single leak.
  • Experience coordinating BIM layouts and resolving electrical and structural clashes before construction.
  • Experience writing and witnessing pressure-testing and flushing procedures that protect sensitive cooling components.
  • Experience verifying valve and pump VFD response during Level 4/5 commissioning.
  • Strong technical documentation, cross-functional coordination, and communication skills.
Preferred Qualifications
  • Master's degree in Mechanical Engineering, Fluid/Thermal Engineering, or a related discipline.
  • Data center liquid cooling experience, including direct-to-chip, immersion cooling, and CDU integration, or comparable process industry experience.
  • Familiarity with lithium bromide handling and absorption cooling systems.
  • Experience supporting hyperscale data centers or other mission-critical process facilities.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Cooling SME– Piping Specialist
Senior Cooling SME– Piping Specialist

Schneider Electric Corp • Goodyear (AZ)

On-site
USD 120,000 - 160,000
Senior Cooling SME– Piping Specialist
Senior Cooling SME– Piping Specialist

Schneider Electric Corp • Fairfield (OH)

On-site
USD 120,000 - 180,000
Senior Mechanical Project Engineer
Senior Mechanical Project Engineer

Giga Energy • United States

On-site
USD 120,000 - 180,000
Senior Mechanical Project Engineer
Senior Mechanical Project Engineer

Giga Energy • Houston (TX)

On-site
USD 110,000 - 160,000
Remote Mechanical & Piping Engineer — Data Center Cooling
Remote Mechanical & Piping Engineer — Data Center Cooling

Uptalent.io • United States

Remote
MXN 670,000 - 1,004,000
Flexible schedules
Work from anywhere
Highly competitive compensation
Mechanical Engineer-Data Center
Mechanical Engineer-Data Center

SLB • Houston (TX)

On-site
USD 70,000 - 90,000
Senior Mechanical Systems Engineer - Data Center HVAC
Senior Mechanical Systems Engineer - Data Center HVAC

Uptalent.io • Texas

Remote
USD 120,000 - 160,000
Principal Thermal Systems Engineer, Data Center Liquid Cooling (Industry Expert)
Principal Thermal Systems Engineer, Data Center Liquid Cooling (Industry Expert)

Axiom Path • United States

Remote
USD 150,000 - 210,000
Health insurance
Retirement plan
Family-building assistance
+3
Project Engineer
Project Engineer

Equiliem • Texas

On-site
USD 90,000 - 145,000
Mechanical Engineer, Data Center
Mechanical Engineer, Data Center

Blue Signal LLC. • San Francisco (CA)

On-site
USD 120,000 - 180,000