Senior Manufacturing Engineer - Solid Missile Systems

ursamajor

Berthoud (CO)

On-site

USD 120,000 - 180,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Ursa Major in Colorado seeks a Senior Manufacturing Engineer to own AP milling and related powder-handling processes for solid rocket motors. The role combines hands-on operations with development, qualification, and continuous improvement across manufacturing lines.

You will establish process specs, SOPs, and work instructions; define critical parameters; manage ECNs; perform risk analyses; and lead Lean/Six Sigma initiatives to scale development to production.

Qualifications

  • Bachelor of Science in Manufacturing Engineering or related field.
  • 6+ years in manufacturing/process engineering roles.
  • Experience with powder/particulate processing in production.
  • Nice to have solid rocket motor or energetic materials experience.

Responsibilities

  • Process Owner for AP milling and powder-handling operations.
  • Lead hands-on troubleshooting with production staff to resolve issues and improve processes.
  • Develop, maintain, and enforce Manufacturing Process Specifications (MPS), SOPs, and Work Instructions.
  • Define and maintain Critical Process Parameters for AP milling (particle size, moisture, bulk density, contamination, flowability).
  • Own process change control via ECNs; perform risk assessments (FMEA/HAZOP) and plan validations.
  • Lead Lean/Six Sigma initiatives to support new propellant formulations and scale-up.
  • Specify and optimize milling equipment and conditions (jet, ball, pin, hammer mills).
  • Design, develop, and validate new manufacturing processes and equipment for AP milling.

Skills

Process ownership
Lean manufacturing
Six Sigma
Troubleshooting
Safety compliance

Education

BS in Manufacturing Engineering

Tools

Jet mills
Ball mills
Pin mills
Hammer mills

Job description

The future of aerospace and defense starts here.

Ursa Major was founded to revolutionize how America and its allies access and apply high‑performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands.

Ursa Major is developing cutting‑edge propulsion systems and is seeking an innovative and hands‑on a Senior Manufacturing Engineer. The Engineer in this role will assume technical and operational ownership of manufacturing processes for solid rocket motors, with a primary focus on Ammonium Perchlorate (AP) milling and related powder‑handling operations. This role will lead the design, development, qualification, and continuous improvement of AP milling processes that feed directly into propellant manufacturing.

The ideal candidate brings deep experience with energetic materials or strong experience with fine powder processing in a safety‑critical or regulated environment and is eager to apply that expertise to solid rocket propulsion. This is a hands‑on position with significant responsibility for day‑to‑day plant operations, process capability, and long‑term process development.

Key Responsibilities
Process Ownership & Development
  • Serve as the Process Owner for AP milling and associated powder‑handling operations
  • Lead hands‑on troubleshooting alongside technicians and engineers on the production floor to resolve complex manufacturing issues, stabilize, and improve processes.
  • Develop, maintain, and enforce process documentation, including:
    • Manufacturing Process Specifications (MPS)
    • Standard Operating Procedures (SOPs)
    • Work Instructions
  • Define and maintain Critical Process Parameters for AP milling (e.g., particle size distribution, moisture content, bulk density, contamination levels, flowability).
  • Own process change control:
    • Initiate, justify, and implement process changes via formal ECN mechanisms.
    • Perform risk assessments (FMEA, HAZOP) for proposed changes.
    • Plan and manage validation and requalification activities following changes.
  • Lead continuous improvement initiatives using Lean, Six Sigma to support:
    • New propellant formulations and motor programs
    • Scale‑up from development to production volumes
    • Reductions in cycle time, scrap, and variability
  • Specify and optimize milling equipment and conditions:
    • Mill type selection (e.g., jet mills, ball mills, pin mills, hammer mills)
    • Operating parameters (feed rates, rotor speeds, classifier settings, media selection, temperature control)
  • Design, develop, and validate new manufacturing processes and equipment to meet design specifications, safety standards, and production rate requirements for AP milling.
  • Provide technical guidance and mentorship to manufacturing engineers and technicians, promoting best practices in process control, problem solving, and operational excellence.
Safety, Environmental & Regulatory Compliance
  • Lead in establishing and maintaining process safety for energetic and oxidizer handling, with a focus on fine powder hazards.
  • Perform and update Process Hazard Analyses (PHA), HAZOPs, and Job Safety Analyses (JSAs) for AP milling and related processes.
  • Define safe operating envelopes for AP milling (e.g., temperature limits, inert atmosphere requirements, static control, equipment interlocks).
  • Ensure compliance with relevant military/industry standards and regulations for energetic materials, oxidizers, and combustible dusts (e.g., applicable NFPA and OSHA requirements).
  • Support incident/near‑miss investigations and implement corrective and preventive actions.

Other duties as assigned.

Required Qualifications
Education
  • Bachelor of Science (B.S.) in Manufacturing Engineering, Mechanical Engineering, Chemical Engineering, Materials Engineering, Aerospace Engineering, or a related field.
Experience
  • Minimum of 6years in a manufacturing or process engineering role, developing and deploying new production processes and equipment.
  • Proven hands‑on experience with powder or particulate material processing in a production environment, such as:
    • Milling, grinding, jet milling, micronization, classification, sieving, blending, or spray drying.
  • Demonstrated process ownership in a production environment:
    • Defined, controlled, and improved processes at scale.
    • Implemented and controlled changes via formal documentation and change‑control systems.
  • Experience in at least one of the following:
    • Solid rocket motor or energetics manufacturing (propellant mixing, casting, curing, machining, powder handling); or
    • Chemical, pharmaceutical, battery materials, metal powder, or other materials processing involving strict safety, quality, and regulatory controls.
Skills
Strong understanding of:
  • Particle technology : particle size distribution, morphology, flow behavior, segregation, packing, bulk density.
  • Milling and classification operations : mill selection, operating principles,
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Manufacturing Engineer - Solid Missile Systems
Senior Manufacturing Engineer - Solid Missile Systems

Industrious Ventures • Berthoud (CO)

On-site
USD 88,000 - 130,000
Unlimited PTO
Parental leave
Medical insurance
+4
Senior Manufacturing Engineer - AP Milling
Senior Manufacturing Engineer - AP Milling

Ursa Major • Berthoud (CO)

On-site
USD 88,000 - 130,000
Unlimited PTO
Parental leave
Medical/Dental/ Vision Insurance
+2
Senior Manufacturing Engineer - Propulsion & Powder
Senior Manufacturing Engineer - Propulsion & Powder

Industrious Ventures • Berthoud (CO)

On-site
USD 88,000 - 130,000
Unlimited PTO
Parental leave
Medical insurance
+4
Senior Propulsion Manufacturing Engineer-Powder Processing
Senior Propulsion Manufacturing Engineer-Powder Processing

Ursa Major • Berthoud (CO)

On-site
USD 88,000 - 130,000
Unlimited PTO
Parental leave
Medical/Dental/ Vision Insurance
+2
Senior Propulsion Manufacturing Engineer – AP Milling Lead
Senior Propulsion Manufacturing Engineer – AP Milling Lead

ursamajor • Berthoud (CO)

On-site
USD 120,000 - 180,000
Senior Program Manufacturing Engineer
Senior Program Manufacturing Engineer

Ursa Major • Berthoud (CO)

On-site
USD 105,000 - 130,000
Unlimited PTO
Paid parental and adoptive leave
Medical, dental and vision insurance
+2
Senior Program Manufacturing Engineer
Senior Program Manufacturing Engineer

Ursa Major Technologies • Berthoud (CO)

On-site
USD 105,000 - 130,000
Unlimited PTO
Parental and Adoptive Leave
Medical, Dental and Vision Insurance
+2
Staff Program Manufacturing Engineer
Staff Program Manufacturing Engineer

ursamajor • Berthoud (CO)

On-site
USD 130,000 - 162,000
Unlimited PTO
Parental and Adoptive Leave
Medical, Dental and Vision Insurance
+5
Staff Program Manufacturing Engineer
Staff Program Manufacturing Engineer

Ursa Major Technologies • Berthoud (CO)

On-site
USD 130,000 - 162,000
Unlimited PTO - Vacation, Sick, etc.
Medical, Dental and Vision Insurance
401k with Company Match
+1
Senior Maintenance Engineer
Senior Maintenance Engineer

Ursa Major • Fort Collins (CO)

On-site
USD 116,000 - 146,000
Unlimited PTO
Parental and Adoptive Leave
Medical Insurance
+10