Senior Electrical Engineer - data center power systems

GTN Technical Staffing

Dallas (TX)

On-site

USD 120,000 - 180,000

Full time

10 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

GTN Technical Staffing seeks a Senior Electrical Engineer focused on Power Generation and Microgrid Systems for a client in the data center sector. The role emphasizes owner-side design for primary power generation, islanded operation, and seamless integration with microgrid controllers.

You will review vendor submittals, perform ETAP analyses, and guide commissioning from FAT to IST. Office-based with field assignments during construction/commissioning, relocation support for non-local

Qualifications

  • Bachelor's degree in Electrical Engineering from ABET-accredited program or equivalent.
  • 10+ years of electrical power systems experience and hands-on operation of generators.
  • Experience with islanded operation of dissimilar generators to maintain frequency/voltage.
  • Experience in EPC or design-build with active construction, startup, and commissioning.

Responsibilities

  • Review contractor engineering and vendor submittals (one-line diagrams, load lists, equipment specs, grounding).
  • Evaluate load-flow, short-circuit, motor-starting, protection coordination, arc-flash, and transient studies.
  • Perform independent calculations and dynamic modeling using ETAP.
  • Verify documentation for procurement releases and regulatory compliance.
  • Support owner-scope design, RFIs, field changes, and change-control processes.
  • Lead commissioning activities, FAT/SAT, and verification of system performance.

Skills

ETAP
Load-flow
Short-circuit
Protection coordination
Governor/Exciter concepts
DG/Generator experience

Education

Bachelor's degree in Electrical Engineering
ABET-accredited program

Tools

IEC 61850
GOOSE/load-shedding
Transient studies

Job description

Senior Electrical Engineer – Power Generation & Microgrid Systems

Work Arrangement: Office-based, with field assignments during construction and commissioning

Compensation: Competitive Base Salary + Bonus

Relocation: Relocation Package Available for Non-Local Candidates

Overview

Our client, a growing high-performance computing and cloud infrastructure company, is seeking a Senior Electrical Engineer – Power Generation & Microgrid Systems to support the owner-side engineering of primary power generation systems for new data center developments.

These facilities use gas turbines, reciprocating engines, or a combination of both as their primary power source, operating independently of the utility grid with an N+1 redundancy target.

The technical focus is the reliable operation of dissimilar generators on a shared islanded bus, including load sharing, frequency and voltage control, transient stability, and load shedding.

Working under the direction of the Design Authority / Subject Matter Expert (SME), this engineer will independently review EPC and vendor engineering, perform verification calculations and owner‑scope design work, and support construction, startup, commissioning, and acceptance testing.

The ideal candidate combines hands‑on power system analysis with practical experience delivering continuously operating generation projects. Experience limited to standby generation or grid‑connected operation will not satisfy the core technical requirements.

Key Responsibilities
Engineering Review & Technical Verification
  • Review contractor engineering and vendor submittals, including single‑line diagrams, load lists, equipment specifications, cable ampacity, grounding, relay settings, and PMS/SCADA architecture.
  • Evaluate load‑flow, short‑circuit, motor‑starting, protective device coordination, arc‑flash, and electromagnetic transient/dynamic studies.
  • Perform independent calculations and dynamic modeling using ETAP.
  • Verify that studies use appropriate contingency cases and vendor‑validated machine, governor, and exciter models.
  • Confirm code compliance and equipment listing documentation before recommending procurement release.
  • Prepare clear technical findings and recommended dispositions for the Design Authority / SME.
Islanded Generation & Controls Integration
  • Evaluate operating philosophies for dissimilar generators running in parallel.
  • Review droop and isochronous control, governor and automatic voltage regulator (AVR) response, real/reactive power sharing, and reactive droop compensation.
  • Assess system behavior during generator loss, load rejection, step‑load events, black start, and re‑synchronization.
  • Review IEC 61850 GOOSE‑based load‑shedding and load‑sharing schemes implemented through microgrid controllers.
  • Verify configuration file control, message performance requirements, PRP/HSR network redundancy, controller failover, and degraded operating modes.
  • Confirm that end‑to‑end load‑shedding timing supports the stability margins assumed in the engineering studies.
  • Verify protection coordination and arc‑flash analysis across credible operating conditions, including all‑units‑online, N‑1, black start, re‑synchronization, and temporary power.
  • Review Failure Modes and Effects Analysis (FMEA) to confirm that loss of a single generating unit can be managed without interrupting IT loads.
  • Assess electrical and controls interfaces across generation packages and balance‑of‑plant equipment.
  • Identify safety, code, cybersecurity, and reliability concerns and elevate critical findings promptly.
Owner‑Scope Design & Construction Support
  • Perform detailed engineering for owner‑retained and owner‑furnished scope, including interfaces, tie‑ins, and temporary power systems.
  • Respond to RFIs, field change requests, proposed deviations, and construction‑stage technical issues.
  • Support witness and hold points established in approved Inspection and Test Plans (ITPs).
  • Route deviations through formal engineering review and change‑control processes.
  • Provide technical assessments distinguishing owner‑directed changes, design development, and contractor rework.
Commissioning & Acceptance
  • Review commissioning plans, test procedures, and acceptance criteria.
  • Witness Factory Acceptance Testing (FAT) at vendor facilities.
  • Support Site Acceptance Testing (SAT), protection and relay functional testing, energization, startup troubleshooting, and Integrated Systems Testing (IST).
  • Witness load‑shedding and load‑sharing tests, including measured GOOSE performance, end‑to‑end shedding time, controller failover, and dissimilar‑generator response.
  • Verify live N+1 failover performance under operating load.
  • Review as‑built documentation, final relay settings, spare parts, and operator training before recommending acceptance or withholding acceptance.
Technical Governance & Documentation
  • Maintain written technical objections, queries, nonconformance reports, and verified closure records.
  • Escalate blocking safety, code, and cybersecurity issues to the SME the same business day.
  • Communicate independent technical conclusions clearly to contractors, vendors, and internal stakeholders.
  • Preserve the EPC contractor’s design responsibility and Engineer of Record obligations.
  • Follow formal approval and change‑order processes for requirements, scope, cost, and schedule changes.

Final technical dispositions, requirement waivers, and gate Go/Hold decisions remain with the Design Authority / SME. This role does not direct contractor construction means and methods.

Required Qualifications
Education & Experience
  • Bachelor’s degree in Electrical Engineering from an ABET‑accredited program or equivalent internationally accredited program.
  • Typically 10+ years of electrical power systems experience.
  • Hands‑on experience with continuously operating, paralleled generation serving as a primary power source.
  • Direct experience with islanded operation of dissimilar generators, where the generating units maintain system frequency and voltage.
  • Experience working within an EPC or design‑build organization, including active construction, startup, and commissioning assignments.
Power System Analysis
  • Hands‑on ETAP proficiency, including personally building and running load‑flow, short‑circuit, motor‑starting, protective device coordination, arc‑flash, and transient stability studies.
  • Ability to evaluate machine models, governor/exciter parameters, and contingency assumptions in contractor studies.
Generation, Protection & Controls
  • Strong understanding of gas turbine and reciprocating engine packages and their electrical and control interfaces.
  • Experience evaluating generators with different inertia, governor response, and load‑acceptance characteristics.
  • Knowledge of IEC 61850 GOOSE‑based load‑shedding and load‑sharing schemes, including configuration, performance, redundancy, and failure modes.
  • Familiarity with balance‑of‑plant equipment, including fuel gas compressors, heaters, pumps, and fans.
  • Working command of high‑, medium‑, and low‑voltage switchgear, motor control centers, generator step‑up transformers, and step‑down transformers.
  • Strong knowledge of applicable ANSI, IEEE, and NEC requirements.
Project Execution & Communication
  • Practical understanding of engineering deliverable lifecycles, Issued for Construction (IFC) releases, vendor data cycles, submittals, RFIs, and turnover.
  • Ability to develop and defend an independent technical position while collaborating effectively with contractors, vendors, and engineering leadership.
  • Strong technical writing, documentation, troubleshooting, and engineering judgment.
Preferred Qualifications
  • Professional Engineer (PE) license.
  • NFPA 70E training.
  • Commissioning credential through ACG, NEBB, or an equivalent organization.
  • Direct configuration review and site testing experience with IEC 61850 schemes.
  • Gas‑insulated switchgear (GIS) experience.
  • Data center or other mission‑critical facility experience.
  • Strong experience maintaining auditable engineering decisions, test evidence, and acceptance records.

This position is based in Dallas and includes field assignments during construction and commissioning, along with travel to vendor facilities for equipment testing.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Electrical Engineer – Data Center Power Systems
Senior Electrical Engineer – Data Center Power Systems

GTN Technical Staffing • Dallas (TX)

On-site
USD 140,000 - 210,000
Staff Electrical Engineer (Power Systems)
Staff Electrical Engineer (Power Systems)

Crusoe Energy Systems • United States

On-site
USD 130,000 - 180,000
Health benefits
Paid time off
401(k) with company match
+1
Senior Electrical Engineer - Power Delivery &
Senior Electrical Engineer - Power Delivery &

TeraWulf • West Palm Beach (FL)

On-site
USD 170,000 - 210,000
Senior Electrical Engineer
Senior Electrical Engineer

Pacifico Energy • Dallas (TX)

On-site
USD 150,000 - 190,000
Senior Electrical Engineer
Senior Electrical Engineer

Applica • Houston (TX)

Hybrid
USD 120,000 - 170,000
Annual bonus
Long-term equity incentives
401(k) with employer contributions
+1
Senior Engineering Manager - Large Load Energy Infrastructure (Data Centers)
Senior Engineering Manager - Large Load Energy Infrastructure (Data Centers)

Spencer Ogden • United States

On-site
USD 140,000 - 210,000
System Controls Engineer- Power Generation
System Controls Engineer- Power Generation

Pacifico Energy • Dallas (TX)

On-site
USD 120,000 - 160,000
Senior Electrical Projects Engineer (ETAP, Plant, Substation)
Senior Electrical Projects Engineer (ETAP, Plant, Substation)

DND Staffing LLC • New York (NY)

On-site
USD 140,000 - 190,000
Senior Electrical Engineer – Power Systems & Safety Leader
Senior Electrical Engineer – Power Systems & Safety Leader

Bayou Recruiting Solutions LLC • Tulsa (OK)

On-site
USD 90,000 - 120,000
Senior Electrical Engineer (PE) – Industrial & Mission Critical
Senior Electrical Engineer (PE) – Industrial & Mission Critical

JFE Engineering • Plano (TX)

On-site
USD 110,000 - 160,000