Sawyer 2A

Columbia Machine World Headquarters

Vancouver (WA)

On-site

USD 27,000 - 32,000

Full time

11 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Columbia Machine Inc. in Vancouver, WA is seeking an entry-level manufacturing associate to support cutting, grinding, and assembly tasks on swing shift. You will read prints, measure with precision, and help stage parts for the next operation.

Responsibilities include safe handling of materials, operating small grinders, and participating in continuous improvement initiatives while maintaining a clean, safe work area. Prior print-reading experience is a plus.

Qualifications

  • High school diploma or GED required or equivalent.
  • Knowledge of LEAN principles and basic print reading.
  • Ability to apply fractions/decimal equivalents and read technical prints.

Responsibilities

  • Read tape measure to 1/32 of an inch and print readings.
  • Operate small grinders and deburring tools safely.
  • Maintain safe, clean work environment and follow SOPs.
  • Assist in continuous improvement and quality control.
  • Coordinate with team to stage parts for next operation.

Skills

Math skills
Print reading
Overhead crane operation
Quality control
Vault tool access
Team player
Safety compliance
Steel identification

Education

High School Diploma or GED

Tools

Vault tool

Job description

Job Details: Level: Entry, Job Location: Columbia Machine Inc - Vancouver, WA 98661, Position Type: Full Time, Salary Range: $19.90 - $23.41, Job Shift: Swing, Job Category: Manufacturing, Summary:

Essential Duties and Responsibilities
  • Read tape measure to 1/32 of an inch
  • Read/use a tri-square
  • Print reading
  • Operate small grinders and deburring tools in a safe manner
  • Cut material for minimum drop/maximum yield
  • Safe rigging practices with chains, slings, magnets, plate clamps
  • Participates in Continuous Improvement efforts
  • Maintains safe and clean work environment
  • Other duties as assigned
Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Knowledge
  • LEAN Principles
Skills
  • Ability to apply math skills - fractions/decimal equivalents
  • Recognize different types of steel and how they affect cutting
  • Operate overhead and jib cranes safely
  • Match prints and routers to parts and stage for next operation
  • Perform initial quality control and appropriate marking for restock and inventory
  • Ability to differentiate speeds and feeds for different materials
  • Ability to straighten and grind parts to tolerance for additional processing
  • Perform conformance inspection to ensure quality parts
  • Ability to use computer and access the Vault tool
Abilities
  • Ability to foster and work within a team environment
  • Actively participates in safety programs and complies with all Columbia safety policies
  • Ability to follow written and verbal instructions
  • Ability to simultaneously work on multiple projects at one time
  • Maintain a clean and safe work environment
  • Displays attention to detail and consistently follows Standard Work Instructions (when available) when completing tasks
  • Demonstrates the qualities of a "Team Player" by accepting new responsibilities and filling in for other employees when needed
  • Self-motivated and has the ability to work with supervision
  • Communicates well with peers, supervisor, customers, vendors, and other departments
  • Actively participates in 6S and other Continuous Improvement (CI) efforts
Education and/or Experience
  • High School Diploma or GED required
  • Basic Print Reading (College experience or on the job training) preferred
  • 1 year of experience preferred
Physical Demands

Constant (over 66%)
Standing, Hearing, and Listening
Frequent (33%-66%)
Lifting and carrying up to 10 LBS
Occasional (10%-33%)
Talking, Walking, Bending, Stooping, Pushing, Pulling, Shoveling, Lifting, and Carrying up to 30 LBS
Seldom (1-10%)
Sitting, Kneeling, Squatting, Crouching, Reaching Overhead, Lifting, and Carrying up to 50 LBS or more
Specific vision abilities required for this job include close vision, depth perception, and the ability to adjust focus.
*Never exceeding our company manual lifting policy and corresponding SOPs.

Work Environment

Industrial Exposure:
Extreme Heat, Extreme Cold, Noise, Vibration, Close Proximity to Moving Parts, Electrical Currents, Dust, Dirt, Solvents, Oils, Cutting Fluids, Welding and Burning Smoke
Required Personal Protective Equipment (PPE’s):
Safety glasses, hearing protection as required. Other PPE as required by specific operational area or task being performed.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Knowledge
  • LEAN Principles
Skills
  • Ability to apply math skills - fractions/decimal equivalents
  • Recognize different types of steel and how they affect cutting
  • Operate overhead and jib cranes safely
  • Match prints and routers to parts and stage for next operation
  • Perform initial quality control and appropriate marking for restock and inventory
  • Ability to differentiate speeds and feeds for different materials
  • Ability to straighten and grind parts to tolerance for additional processing
  • Perform conformance inspection to ensure quality parts
  • Ability to use computer and access the Vault tool
Abilities
  • Ability to foster and work within a team environment
  • Actively participates in safety programs and complies with all Columbia safety policies
  • Ability to follow written and verbal instructions
  • Ability to simultaneously work on multiple projects at one time
  • Maintain a clean and safe work environment
  • Displays attention to detail and consistently follows Standard Work Instructions (when available) when completing tasks
  • Demonstrates the qualities of a "Team Player" by accepting new responsibilities and filling in for other employees when needed
  • Self-motivated and has the ability to work with supervision
  • Communicates well with peers, supervisor, customers, vendors, and other departments
  • Actively participates in 6S and other Continuous Improvement (CI) efforts
Education and/or Experience
  • High School Diploma or GED required
  • Basic Print Reading (College experience or on the job training) preferred
  • 1 year of experience preferred
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Sawyer 2A
Sawyer 2A

Colmac • Vancouver (WA)

On-site
USD 27,000 - 32,000
Field Service Technician - Concrete Products
Field Service Technician - Concrete Products

Columbia Machine, Inc. • Vancouver (WA)

On-site
USD 60,000 - 82,000
Medical insurance
Dental insurance
Vision insurance
+3
1st Shift - Saw Operator I - Tualatin, OR
1st Shift - Saw Operator I - Tualatin, OR

Phoenix Metals • Tualatin (OR)

On-site
USD 42,000 - 54,000
Weekend Shift Machine Operator III
Weekend Shift Machine Operator III

Nichols Portland • Portland (ME)

On-site
USD 25,000 - 32,000
Welder B
Welder B

Samuel, Son & Co. • Lebanon (VA)

On-site
USD 42,000 - 72,000
Competitive compensation
Paid vacation and annual bonus
Health, dental and vision insurance
+2
Warehouse Clerk
Warehouse Clerk

Columbia Machine, Inc. • Vancouver (WA)

On-site
USD 21,000 - 26,000
Medical insurance
Dental insurance
Vision insurance
+3
Planner
Planner

Columbia Machine World Headquarters • Vancouver (WA)

On-site
USD 46,000 - 70,000
401(k)
401(k) matching
Dental insurance
+9
Saw Operator
Saw Operator

PPI • Lenox Township (IA)

On-site
USD 52,000 - 66,000
Machinist III: Chesapeake
Machinist III: Chesapeake

Sumitomo Drive Technologies • Chesapeake (VA)

On-site
USD 58,000 - 72,000
Medical Insurance
Dental Insurance
Vision Insurance
+6
Production Welder T -1st Shift
Production Welder T -1st Shift

Ipsen Inc • Cherry Valley (IL)

On-site
USD 32,000 - 46,000