Sawyer 2A

Colmac

Vancouver (WA)

On-site

USD 27,000 - 32,000

Full time

11 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Columbia Machine Inc in Vancouver, WA is seeking a Sawyer 2A to accurately cut metallic and nonmetallic parts. The role requires setting up power saws, selecting blades, and verifying dimensions against prints and templates.

Safety and precision are essential to minimize waste and maximize yield. The Sawyer will read gauges, operate small grinders, and participate in continuous improvement while maintaining a clean, safe work environment.

Qualifications

  • High school diploma or GED required.
  • Basic print reading; college experience or on-the-job training preferred.
  • 1 year of experience preferred.

Responsibilities

  • Read tape measure to 1/32 of an inch.
  • Operate power saws for cutting, slotting, grooving, mitering, and trimming.
  • Select and install blades; adjust machine settings; position workpieces accurately.
  • Perform quality checks against prints, templates, or samples.

Skills

LEAN Principles
Math skills
Prints & routers reading
Cutting with power saws
Quality control
Speeds & feeds
Gantry/overhead crane operation
Fixture and tooling setup
Vault tool access
Team collaboration
Safety compliance
6S / CI participation

Education

High School Diploma or GED
Basic Print Reading
1 year experience (preferred)

Tools

Vault tool
Tri-square

Job description

Sawyer 2A# Sawyer 2AColumbia Machine Inc - Vancouver, WA 98661; 107 GRAND BOULEVARD - VANCOUVER, WA 98661## OverviewSalary Range$19.90 - $23.41LevelEntryPosition TypeFull TimeJob ShiftSwingCategoryManufacturing## Description**Summary:**The Sawyer plays a crucial role in the Steel Service Center, responsible for the precise cutting of both metallic and nonmetallic workpieces. The position requires setting up and operating various power saws, including those used for cutting, slotting, grooving, mitering, and trimming materials according to exact specifications. The Sawyer must be adept at selecting and installing the appropriate blades, adjusting machine settings, and positioning workpieces accurately using various tools and fixtures. Precision and attention to detail are key, as the Sawyer must verify that the dimensions of the finished pieces match the specifications provided by prints, templates, or sample parts.**Essential Duties and Responsibilities:*** Read tape measure to 1/32 of an inch* Read/use a tri-square* Print reading* Operate small grinders and deburring tools in a safe manner* Cut material for minimum drop/maximum yield* Safe rigging practices with chains, slings, magnets, plate clamps* Participates in Continuous Improvement efforts* Maintains safe and clean work environment* Other duties as assigned**Qualifications:**To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.**Knowledge, skills and/or abilities:*****Knowledge***-1. LEAN Principles***Skills***-1. Ability to apply math skills - fractions/decimal equivalents2. Recognize different types of steel and how they affect cutting3. Operate overhead and jib cranes safely4. Match prints and routers to parts and stage for next operation5. Perform initial quality control and appropriate marking for restock and inventory6. Ability to differentiate speeds and feeds for different materials7. Ability to straighten and grind parts to tolerance for additional processing8. Perform conformance inspection to ensure quality parts9. Ability to use computer and access the Vault tool***Abilities-***1. Ability to foster and work within a team environment2. Actively participates in safety programs and complies with all Columbia safety policies3. Ability to follow written and verbal instructions4. Ability to simultaneously work on multiple projects at one time5. Maintain a clean and safe work environment6. Displays attention to detail and consistently follows Standard Work Instructions (when available) when completing tasks7. Demonstrates the qualities of a \"Team Player\" by accepting new responsibilities and filling in for other employees when needed8. Self-motivated and has the ability to work with supervision9. Communicates well with peers, supervisor, customers, vendors, and other departments10. Actively participates in 6S and other Continuous Improvement (CI) efforts**Education and/or Experience:** 1. High School Diploma or GED *required*2. Basic Print Reading (College experience or on the job training) *preferred*3. 1 year of experience *preferred***Physical Demands**(The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions)**:***Constant (over 66%)*Standing, Hearing, and Listening*Frequent (33%-66%)*Lifting and carrying up to 10 LBS*Occasional (10%-33%)*Talking, Walking, Bending, Stooping, Pushing, Pulling, Shoveling, Lifting, and Carrying up to 30 LBS*Seldom (1-10%)*Sitting, Kneeling, Squatting, Crouching, Reaching Overhead, Lifting, and Carrying up to 50 LBS or moreSpecific vision abilities required for this job include close vision, depth perception, and the ability to adjust focus.\\*Never exceeding our company manual lifting policy and corresponding SOPs.**Work Environment** (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions)**.****Industrial Exposure:**Extreme Heat, Extreme Cold, Noise, Vibration, Close Proximity to Moving Parts, Electrical Currents, Dust, Dirt, Solvents, Oils, Cutting Fluids, Welding and Burning Smoke**Required Personal Protective Equipment (PPE’s):**Safety glasses, hearing protection as required. Other PPE as required by specific operational area or task being performed.## Qualifications**Qualifications:**To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.**Knowledge, skills and/or abilities:*****Knowledge***-1. LEAN Principles***Skills***-1. Ability to apply math skills - fractions/decimal equivalents2. Recognize different types of steel and how they affect cutting3. Operate overhead and jib cranes safely4. Match prints and routers to parts and stage for next operation5. Perform initial quality control and appropriate marking for restock and inventory6. Ability to differentiate speeds and feeds for different materials7. Ability to straighten and grind parts to tolerance for additional processing8. Perform conformance inspection to ensure quality parts9. Ability to use computer and access the Vault tool***Abilities-***1. Ability to foster and work within a team environment2. Actively participates in safety programs and complies with all Columbia safety policies3. Ability to follow written and verbal instructions4. Ability to simultaneously work on multiple projects at one time5. Maintain a clean and safe work environment6. Displays attention to detail and consistently follows Standard Work Instructions (when available) when completing tasks7. Demonstrates the qualities of a \"Team Player\" by accepting new responsibilities and filling in for other employees when needed8. Self-motivated and has the ability to work with supervision9. Communicates well with peers, supervisor, customers, vendors, and other departments10. Actively participates in 6S and other Continuous Improvement (CI) efforts**Education and/or Experience:** 1. High School Diploma or GED *required*2. Basic Print Reading (College experience or on the job training) *preferred*3. 1 year of experience *preferred*
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Sawyer 2A
Sawyer 2A

Columbia Machine World Headquarters • Vancouver (WA)

On-site
USD 27,000 - 32,000
Warehouse Clerk
Warehouse Clerk

Colmac • Vancouver (WA)

On-site
USD 30,000 - 32,000
1st Shift - Saw Operator I - Tualatin, OR
1st Shift - Saw Operator I - Tualatin, OR

Phoenix Metals • Tualatin (OR)

On-site
USD 42,000 - 54,000
Manufacturing Engineer 2
Manufacturing Engineer 2

Colmac • Vancouver (WA)

On-site
USD 80,000 - 111,000
401(k)
401(k) matching
Dental insurance
+3
Saw Operator
Saw Operator

Momentum Manufacturing Group • Franklin (NH)

On-site
USD 36,000 - 48,000
Saw Operator
Saw Operator

Oso Perforating, LLC • Oso (WA)

On-site
USD 25,000 - 39,000
Saw Operator
Saw Operator

Oso Perforating • Oklahoma

On-site
USD 21,000 - 30,000
Saw Operator 1
Saw Operator 1

Reliance, Inc. • Cedar Hill (TX)

On-site
USD 36,000 - 48,000
Precision Saw Operator – Fabrication Prep & Machining
Precision Saw Operator – Fabrication Prep & Machining

Harrington • Manheim (PA)

On-site
USD 21,000 - 30,000
Saw Operator 1
Saw Operator 1

Reliance, Inc. • Louisville (KY)

On-site
USD 38,000 - 52,000