Welder B

Samuel, Son & Co.

Lebanon (VA)

On-site

USD 42,000 - 72,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Competitive compensation
Paid vacation and annual bonus
Health, dental and vision insurance
Pension plan with company match
Fast advancement and career growth

Job summary

Samuel, Son & Co. in Lebanon, VA is seeking a Welder to fabricate and weld line tanks and larger specialty vessels.

You will work from engineering drawings and bills of materials, using processes like GMAW, FCAW, SMAW, and OAW to produce high-quality products at the lowest cost while meeting customer specs. Essential duties include reading blueprints, operating welding and flame-cutting equipment, inspecting welds, and maintaining safety standards.

Qualifications

  • High school diploma or GED with trades training or related experience.
  • Ability to read and interpret blueprints, BOMs, safety rules, and manuals.
  • Ability to communicate effectively one-on-one with coworkers.
  • Good math skills and basic shop arithmetic.
  • Experience operating welding and fabricating equipment.

Responsibilities

  • Read and interpret blueprints or welding process specifications.
  • Operate welding equipment: GMAW, FCAW, SMAW, OAW.
  • Operate flame cutting equipment.
  • Operate metal shaping machines (brakes, shears).
  • Weld components in flat, vertical, or overhead positions.

Skills

Blueprint reading
Safety awareness
Teamwork
Manual dexterity
Metallurgy basics

Education

High school diploma or GED

Tools

GMAW
FCAW
SMAW
OAW
Flame cutting
Bandsaw

Job description

Summary: This position is primarily responsible for the welding of pressure vessels. This position works from engineering drawings and a Bill of Materials to fabricate and weld line tanks and larger specialty vessels to produce the highest quality products at the lowest possible cost, while meeting departmental performance standards, and customer specifications and delivery requirements, in accordance with company policies and procedures.

Essential Functions:
  • Read and interpret blueprints or welding process specification.
  • Operate manual or semi-automatic welding equipment to fuse metal segments using processes such as gas metal arc (GMAW), flux-cored arc (FCAW), shielded metal arc (SMAW), oxy-acetylene (OAW).
  • Operate manual or semi-automatic flame cutting equipment.
  • Operate metal shaping machines such as brakes, shears and other metal straightening and bending machines.
  • May cut metal plates or structural shapes. May be designated according totype of equipment used as Welder, Welder, Flux-Cored Arc (welding); Welder, Gas-Metal Arc (welding); Welder, Gas-Tungsten Arc (welding); Welder, Hand, Submerged Arc (welding); Welder, Plasma Arc (welding); Welder, Shielded-Metal Arc (welding).
  • Observes tests on welded surfaces, such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications.
  • Inspects grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments.
  • Removes rough spots from work piece, using portable grinder, hand file, or scraper.
  • Welds components in flat, vertical, or overhead positions.
  • Determines required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques.
  • Notifies supervisor of any quality or safety issues.
  • Maintains effective interpersonal working relationships and functions as a team member.
  • Ensures proper care in the use and maintenance of equipment and supplies; promotes continuous improvement of workplace safety and environmental practices.
  • Performs miscellaneous job-related duties as assigned.
  • Works in other departments on an as-needed basis.
  • Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards.
  • Assist in training new employees in the safe and most efficient use of fabricating and welding methods.
Minimum Job Requirements:
  • High school diploma or GED with one year of trades training and at least one year of related experience; or a combination of education and experience.
  • Ability to read and interpret documents such as bills of material, blueprints, safety rules, operating and maintenance instructions and procedure manuals.
  • Ability to communicate effectively one-on-one with other employees of the organization.
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  • Ability to apply common sense understanding to carry out detailed but uninvolved written and oral instructions.
  • Must possess good mechanical ability and the ability to perform basic calculations to operate welding and fabricating machines.
  • Demonstrates ability to operate a welder, grinder, bandsaw, ironworker, overhead crane, torch, measuring devices and a variety of hand and power tools.
  • Prior work record indicating dependability and conscientiousness.
  • Must be willing to work in a team-oriented environment.
Conditions of Employment:
  • Successful candidate must submit to poster offer, pre-employment drug and alcohol test.
  • Adheres to the policies and procedures of the organization to include work rules and attendance guidelines.
  • Requires the use of safety glasses and shoes, welding helmet, grinding shield, safety glasses, tight-fitting clothing without tears, hearing protection, and gloves.
Working Conditions and Physical Effort:
  • Exposure to temperature changes, noise, fumes and mechanical, chemical, or electrical hazards.
  • Work environment involves some exposure to hazards or physical risks, which require following basic safety precautions.
  • Ability to stand for prolonged periods of time.
  • Ability to climb, bend, stoop, and squat frequently.
  • Ability to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell.
  • Must have good body mechanics and manual dexterity.
  • The employee must frequently lift and/or move up to 75 pounds or more.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
SUMMARY & SCOPE:

This position is primarily responsible for welding of pressure vessels. This position works from engineering drawings and a Bill of Materials to fabricate and weld line tanks, as well as larger specialty vessels, to produce the highest quality products at the lowest possible cost. The welder is responsible for meeting departmental performance standards, customer specifications, and delivery requirements in accordance with company policies and procedures.

RESPONSIBILITIES:
  • Read and interpret blueprints or welding process specification.
  • Operate manual or semi-automatic welding equipment to fuse metal segments using processes such as gas metal arc (GMAW), flux-cored arc (FCAW), shielded metal arc (SMAW), oxy-acetylene (OAW).
  • Operate manual or semi-automatic flame cutting equipment.
  • Operate metal shaping machines such as brakes, shears and other metal straightening and bending machines.
  • May cut metal plates or structural shapes. May be designated according totype of equipment used as Welder, Welder, Flux-Cored Arc (welding); Welder, Gas-Metal Arc (welding); Welder, Gas-Tungsten Arc (welding); Welder, Hand, Submerged Arc (welding); Welder, Plasma Arc (welding); Welder, Shielded-Metal Arc (welding).
  • Observes tests on welded surfaces, such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications.
  • Inspects grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments.
  • Removes rough spots from work piece, using portable grinder, hand file, or scraper.
  • Welds components in flat, vertical, or overhead positions.
  • Determines required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques.
  • Notifies supervisor of any quality or safety issues.
  • Maintains effective interpersonal working relationships and functions as a team member.
  • Ensures proper care in the use and maintenance of equipment and supplies; promotes continuous improvement of workplace safety and environmental practices.
  • Performs miscellaneous job-related duties as assigned.
  • Works in other departments on an as-needed basis.
  • Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards.
  • Assist in training new employees in the safe and most efficient use of fabricating and welding methods.
EQUIPMENT KNOWLEDGE:
  • Must have a basic understanding of computers.
  • Must have reading, writing and simple math skills.
  • Must be able to read blue prints.
ROLE REQUIREMENTS:
  • High school diploma or GED with one year of trades training and at least one year of related experience; or a combination of education and experience.
  • Ability to read and interpret documents such as bills of material, blueprints, safety rules, operating and maintenance instructions and procedure manuals.
  • Ability to communicate effectively one-on-one with other employees of the organization.
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  • Ability to apply common sense understanding to carry out detailed but uninvolved written and oral instructions.
  • Must possess good mechanical ability and the ability to perform basic calculations to operate welding and fabricating machines.
  • Demonstrates ability to operate a welder, grinder, bandsaw, ironworker, overhead crane, torch, measuring devices and a variety of hand and power tools.
  • Prior work record indicating dependability and conscientiousness.
  • Must be willing to work in a team-oriented environment.
PHYSICAL REQUIREMENTS:
  • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Stand / walk – Frequent
  • Bend / squat – Frequent
  • Sitting – Occasionally
  • Lifting – Frequent (0 -50 lbs., if> 50 lbs. w/assistance)
  • Reaching / simple grasping – Frequent
  • Push / Pulling – Frequent
  • Lifting above waist / shoulders – Frequent
  • Computer usage – Frequent
  • Verbal Communication – Frequent
WORK ENVIRONMENT:
  • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Work 100% of the time in a manufacturing setting; standing, sitting, kneeling, walking, bending, lifting, and reaching.
  • Majority of work activities performed indoors in an area with temperature variations, noise, dust, and fumes.
  • Occasionally working in a wet environment
  • Occasional work activity is performed outdoors.

Samuel, Son & Co. is growing! If you're looking for a rewarding career opportunity with a family run, industry leading organization, bring your experience and motivated attitude to Samuel, Son & Co. Due to our continued success, we are seeking a Welder to join our team in Lebanon, VA. If you think you have what it takes to become part of our team, contact us today. Here are some of what we have to offer:

  • Competitive compensation
  • Paid vacation and an annual bonus
  • Health, dental and vision insurance
  • Pension plan with company match
  • Opportunity for fast advancement and career growth
SUMMARY & SCOPE:

This position is primarily responsible for welding of pressure vessels. This position works from engineering drawings and a Bill of Materials to fabricate and weld line tanks, as well as larger specialty vessels, to produce the highest quality products at the lowest possible cost. The welder is responsible for meeting departmental performance standards, customer specifications, and delivery requirements in accordance with company policies and procedures.

RESPONSIBILITIES:
  • Read and interpret blueprints or welding process specification.
  • Operate manual or semi-automatic welding equipment to fuse metal segments using processes such as gas metal arc (GMAW), flux-cored arc (FCAW), shielded metal arc (SMAW), oxy-acetylene (OAW).
  • Operate manual or semi-automatic flame cutting equipment.
  • Operate metal shaping machines such as brakes, shears and other metal straightening and bending machines.
  • May cut metal plates or structural shapes. May be designated according totype of equipment used as Welder, Welder, Flux-Cored Arc (welding); Welder, Gas-Metal Arc (welding); Welder, Gas-Tungsten Arc (welding); Welder, Hand, Submerged Arc (welding); Welder, Plasma Arc (welding); Welder, Shielded-Metal Arc (welding).
  • Observes tests on welded surfaces, such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications.
  • Inspects grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments.
  • Removes rough spots from work piece, using portable grinder, hand file, or scraper.
  • Welds components in flat, vertical, or overhead positions.
  • Determines required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques.
  • Notifies supervisor of any quality or safety issues.
  • Maintains effective interpersonal working relationships and functions as a team member.
  • Ensures proper care in the use and maintenance of equipment and supplies; promotes continuous improvement of workplace safety and environmental practices.
  • Performs miscellaneous job-related duties as assigned.
  • Works in other departments on an as-needed basis.
  • Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards.
  • Assist in training new employees in the safe and most efficient use of fabricating and welding methods.
EQUIPMENT KNOWLEDGE:
  • Must have a basic understanding of computers.
  • Must have reading, writing and simple math skills.
  • Must be able to read blue prints.
ROLE REQUIREMENTS:
  • High school diploma or GED with one year of trades training and at least one year of related experience; or a combination of education and experience.
  • Ability to read and interpret documents such as bills of material, blueprints, safety rules, operating and maintenance instructions and procedure manuals.
  • Ability to communicate effectively one-on-one with other employees of the organization.
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  • Ability to apply common sense understanding to carry out detailed but uninvolved written and oral instructions.
  • Must possess good mechanical ability and the ability to perform basic calculations to operate welding and fabricating machines.
  • Demonstrates ability to operate a welder, grinder, bandsaw, ironworker, overhead crane, torch, measuring devices and a variety of hand and power tools.
  • Prior work record indicating dependability and conscientiousness.
  • Must be willing to work in a team-oriented environment.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Welder
Welder

SS Industries • Collegeville (PA)

On-site
USD 28,000 - 41,000
Skilled Welder: Fabrication & Precision Welding
Skilled Welder: Fabrication & Precision Welding

Cwdusttech • Texas

On-site
USD 40,000 - 55,000
Welder
Welder

Cwdusttech • Texas

On-site
USD 40,000 - 55,000
Welder
Welder

Stoughton Trailers, LLC • Waco (TX)

On-site
USD 25,000 - 39,000
Welder
Welder

Hayes Manufacturing • Pineville (LA)

On-site
USD 35,000 - 50,000
Welder
Welder

Vulcan Materials Company • Grand Rivers (KY)

On-site
USD 42,000 - 60,000
Welder - Second Shift
Welder - Second Shift

Ushers / Aalberts surface technologies-machining solutions • South Carolina

On-site
USD 25,000 - 39,000
10% Shift Premium
Paid Lunches
Welder
Welder

Detroit Tool Metal Products • Dublin (VA)

On-site
USD 22,000 - 31,000
Welder - Intermediate - First Shift 07:00 - 3:30 Mon-Fri
Welder - Intermediate - First Shift 07:00 - 3:30 Mon-Fri

Shapesmfg • Palm Bay (FL)

On-site
USD 55,000 - 75,000
Welder III
Welder III

Lewis Energy Group • Texas

On-site
USD 60,000 - 85,000