Saw Operator – Pipe Fabrication | 1st Shift

Stand-By Personnel, Inc.; Tulsa (OK); On-site; USD 23,000 - 32,000; Full time

Job summary

Stand-By Personnel, Inc. in Tulsa, OK seeks an experienced Saw Operator for an industrial pipe fabrication shop. You will cut, measure, bevel, and prepare pipe materials to fabrication specifications, using band saws and a range of cutting tools.

This is not an entry‑level role and requires hands‑on experience with pipe fabrication equipment. Starting pay is $20.00 per hour, with advancement based on experience.

Qualifications

• Previous experience operating band saws and industrial fabrication equipment is required.
• Candidates must read a tape measure and interpret blueprints, technical drawings, and fabrication specifications.
• Strong knowledge of pipe diameters, wall thicknesses, and material grades is essential for selecting and preparing materials.
• Experience with pipe cutting, beveling, grinding, and material preparation is required.
• Candidates should be comfortable working independently or as part of a fabrication team.

Responsibilities

• Operate small shop band saws to accurately cut pipe and other fabrication materials according to work orders and production specifications.
• Read and interpret blueprints, fabrication drawings, and technical instructions to determine cutting dimensions and material requirements.
• Measure and mark pipe materials using tape measures and other applicable measuring tools.
• Identify and verify pipe diameters, wall thicknesses, and material grades before cutting or preparing materials.
• Perform pipe preparation and beveling operations using appropriate fabrication equipment.
• Operate pneumatic and oxy‑acetylene pipe bevelers to prepare pipe ends according to applicable specifications.
• Use oxy‑acetylene torches, plasma torches, die grinders, angle grinders, and drill presses as required for material preparation.
• Inspect completed cuts and prepared pipe components for dimensional accuracy, proper bevels, and overall quality.
• Identify material discrepancies, equipment concerns, or cutting errors and communicate issues to supervisors.
• Maintain clean and organized work areas while following all company safety procedures and equipment operating requirements.
• Assist with additional pipe preparation and fabrication responsibilities as assigned.

Skills

Tape measure reading

Blueprint reading

Fabrication shop experience

Pipe material identification

Attention to detail

Tools

Band saws

Pneumatic pipe bevelers

Oxy‑acetylene pipe bevelers

Oxy‑acetylene torches

Plasma torches

Die grinders

Angle grinders

Drill presses

Job description

Saw Operator – Pipe Fabrication | 1st Shift Pay: Starting at $20.00+ per hour (Based on Experience) Location: Tulsa, OK Shift: 5:00 AM – 1:30 PM Experience: Previous Saw Operation & Fabrication Experience Required Job Order #: 155109

Position Overview

Stand-By Personnel is seeking an experiencedSaw Operator for an industrial pipe fabrication opportunity in Tulsa, Oklahoma. This position is responsible for cutting, measuring, beveling, and preparing pipe materials according to blueprints and fabrication specifications. Candidates must have previous hands‑on experience operatingband saws and fabrication shop equipment, along with a strong understanding of pipe diameters, wall thicknesses, and material grades. The ideal candidate has excellent tape-measure skills, experience with pipe preparation and beveling, and the ability to safely operate various cutting, grinding, and fabrication tools. This is not an entry‑level position. Previous saw operation and fabrication shop experience are required. This opportunity offersstarting pay of $20.00 per hour or higher, depending on experience and qualifications.

Required Experience & Qualifications

Previous experience operating band saws and industrial fabrication equipment is required. Candidates must be able to accurately read a tape measure and interpret blueprints, technical drawings, and fabrication specifications. Strong knowledge ofpipe diameters, wall thicknesses, and material grades is essential for selecting, measuring, and preparing the correct materials. Experience with pipe cutting, beveling, grinding, and material preparation is required. Candidates should have hands‑on experience with the following equipment: Small shop band saws Pneumatic pipe bevelers Oxy‑acetylene pipe bevelers Oxy‑acetylene torches Plasma torches Die grinders 4.5‑inch angle grinders Drill presses Strong mechanical aptitude, attention to detail, and the ability to maintain accurate measurements are essential. Candidates must be comfortable working independently or as part of a fabrication team while maintaining production efficiency and quality. Dependable attendance, strong communication skills, and a commitment to workplace safety are important.

Essential Duties & Responsibilities

Operate small shop band saws to accurately cut pipe and other fabrication materials according to work orders and production specifications. Read and interpret blueprints, fabrication drawings, and technical instructions to determine cutting dimensions and material requirements. Measure and mark pipe materials using tape measures and other applicable measuring tools. Identify and verify pipe diameters, wall thicknesses, and material grades before cutting or preparing materials. Perform pipe preparation and beveling operations using appropriate fabrication equipment. Operate pneumatic and oxy‑acetylene pipe bevelers to prepare pipe ends according to applicable specifications. Use oxy‑acetylene torches, plasma torches, die grinders, angle grinders, and drill presses as required for material preparation. Inspect completed cuts and prepared pipe components for dimensional accuracy, proper bevels, and overall quality. Identify material discrepancies, equipment concerns, or cutting errors and communicate issues to supervisors. Maintain clean and organized work areas while following all company safety procedures and equipment operating requirements. Assist with additional pipe preparation and fabrication responsibilities as assigned.

Band Saw Operation & Material Cutting

Candidates must have practical experience operating industrial band saws in a fabrication or manufacturing environment. Responsibilities include measuring materials, preparing equipment, positioning pipe, and completing accurate cuts according to production requirements. Strong attention to measurement accuracy and safe equipment operation is essential. Candidates should be comfortable maintaining consistent cutting quality while working in a fast‑paced fabrication shop.

Pipe Identification & Material Preparation

This position requires a strong understanding of pipe materials and specifications. Candidates must be able to identify different pipe diameters, wall thicknesses, and material grades. Responsibilities include verifying materials against fabrication drawings, measuring pipe accurately, and preparing components for additional fabrication or welding operations. The ability to recognize incorrect materials or dimensional discrepancies is important for maintaining production quality.

Pipe Beveling & Fabrication Equipment

Candidates will perform pipe preparation and beveling using specialized fabrication equipment. Experience with pneumatic pipe bevelers and oxy‑acetylene pipe bevelers is especially valuable. Additional responsibilities may involve operating cutting torches, plasma torches, grinders, and drill presses to prepare materials according to specifications. Candidates must understand proper tool selection, safe equipment operation, and the importance of accurate pipe preparation.

Blueprint Reading & Precision Measurement

Candidates must be able to read and interpret fabrication blueprints, technical drawings, and applicable specifications. Responsibilities include identifying required dimensions, verifying pipe sizes, following cutting instructions, and ensuring completed components meet production requirements. Accurate tape‑measure skills are required. Strong attention to detail is essential for maintaining dimensional accuracy and reducing material waste.

Quality Inspection & Workmanship

Inspect completed pipe cuts, bevels, and prepared components to ensure they meet applicable fabrication specifications. Verify measurements, material identification, and overall preparation quality before components advance to additional production stages. Identify cutting or preparation concerns and make applicable corrections while maintaining consistent workmanship.

Preferred Qualifications

Previous experience as a Saw Operator, Pipe Saw Operator, Fabrication Saw Operator, Pipe Preparation Technician, or Industrial Fabrication Worker is highly valuable. Experience with pipe fabrication, band saw operation, material identification, pipe beveling, blueprint interpretation, and industrial cutting equipment is preferred. Candidates with a proven ability to independently measure, cut, and prepare pipe materials according to fabrication drawings are strongly encouraged to apply.

Physical Requirements & Work Environment

This is a physically active position in an industrial pipe fabrication shop. Candidates must be comfortable standing and walking for extended periods, bending, reaching, lifting, carrying, and positioning pipe materials throughout the shift. Work involves regular exposure to band saws, cutting torches, grinders, metal materials, and other fabrication equipment. Candidates must maintain awareness of equipment hazards, sharp materials, sparks, and active production operations. All required personal protective equipment and company safety procedures must be followed.

Schedule Requirements

1st Shift | 5:00 AM – 1:30 PM Candidates must be comfortable with early‑morning start times and maintain dependable attendance. Specific workdays will be confirmed during the hiring process.

Why You’ll Want This Opportunity

This position offersstarting pay of $20.00+ per hour, based on experience, with an early first‑shift schedule. Experienced Saw Operators will have the opportunity to utilize their pipe fabrication, material preparation, beveling, and cutting skills in an industrial manufacturing environment. An excellent opportunity for skilled fabrication professionals who take pride in accurate measurements, quality workmanship, and efficient production.