Robotics Electrical Engineer - Harness & CAN Design

Capgemini

Logan (UT)

On-site

USD 59,000 - 92,000

Full time

1 hour ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Medical benefits
Dental benefits
Vision benefits
Retirement benefits

Qualifications

  • Bachelor’s degree in Electrical/Electronic engineering or related field.
  • Minimum 5 years’ experience with electronics systems integration and troubleshooting.
  • Experience with test equipment including Oscilloscope, multimeter, protocol analyzers, power supplies.
  • Experience with CAD/Circuit design.
  • Knowledge of building and testing harnesses per IPC/WHMA-A-620.
  • Basic office software skills (word processing, spreadsheet, Outlook).

Responsibilities

  • Designs Electrical System diagrams including harnesses.
  • Works closely with other engineers on routing harnesses and placing electronic modules.
  • Programs embedded modules (C and visual programming language).
  • Assembles and tests experimental wiring harnesses, electronic modules, and other electrical equipment and components.
  • Troubleshoots electrical prototypes to correct functional deviations.
  • Diagnoses cause of electrical or mechanical malfunctions or failures and performs preventive and corrective actions.
  • Works from wiring diagrams, layout drawings, and engineering specifications for system or equipment modifications or expansion and performs installation.
  • Adjusts and replaces defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Tests electronics units, using standard test equipment, and analyzes results to evaluate performance and determine need for adjustment.
  • Plans, completes, and records periodic electrical testing, and recommends or initiates modification or replacement of equipment which fails to meet acceptable operating standards.
  • May perform preventative maintenance and calibration of equipment and systems.
  • Maintains knowledge of state-of-the-art tools or software by reading or attending conferences/workshops.

Skills

Electronics systems integration
Troubleshooting
Embedded programming
Mechanical assembly basics

Education

Bachelor's degree in Electrical/Electronic Engineering

Tools

Oscilloscope
Multimeter
Protocol analyzers
Power supplies
CAD/Circuit design
IPC/WHMA-A-620 knowledge

Job description

The primary responsibilities include designing and installing electrical subsystems on small robots and other ground-based vehicles and coordinating design and installations under the direction of senior electrical and/or mechanical engineers. Design includes electrical topology of Drive By Wire systems (what parts, where and how to connect them) based on similar systems. This includes harness design and pin mapping (similar to reverse engineering), as well as building and testing wiring harnesses, troubleshooting, repairing, and modifying electrical wiring where necessary and applying principles and theories of electronics, electrical circuitry, and electronic and electrical testing. Examples of troubleshooting include analyzing serial bus (i.e. CAN) electrical signals and data.

May be required to do some: Electronic modules programming, lay out, build, test, troubleshoot, repair, and modify developmental electronic components, parts, equipment, and systems, such as computer equipment, test equipment, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Usually work under direction of more senior engineering staff, with little to no supervision. Gaining or has attained full proficiency in a specific area of discipline.

Essential duties and responsibilities:

Designs Electrical System diagrams including harnesses.

Works closely with other engineers on routing harnesses and placing electronic modules.

Programs embedded modules (C and logical visual programming language).

Assembles and tests experimental wiring harnesses, electronic modules, and other electrical equipment and components.

Troubleshoots electrical prototypes to correct functional deviations.

Diagnoses cause of electrical or mechanical malfunctions or failures of operational equipment and performs preventive and corrective actions.

Works from wiring diagrams, layout drawings, and engineering specifications for system or equipment modifications or expansion and performs installation.

Adjusts and replaces defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.

Tests electronics units, using standard test equipment, and analyze results to evaluate performance and determine need for adjustment.

Plans, completes, and records periodic electrical testing, and recommends or initiates modification or replacement of equipment which fails to meet acceptable operating standards.

May perform preventative maintenance and calibration of equipment and systems.

Maintains working knowledge of state-of-the-art tools or software by reading or attending conferences, workshops or other training.

Essential education, work experience and job skills:

Bachelor’s degree in Electrical / Electronic engineering or related field. May consider equivalent combination of education and experience.

Min 5 years' experience with electronics systems integration and troubleshooting, test equipment usage including Oscilloscope, multi-meter, protocol analyzers, various power supplies, and some electronic modules programming.

Experience with CAD/Circuit design.

Must be knowledgeable in building and testing harnesses according to IPC/WHMA-A-620.

Knowledge of electronics wire routings.

Experience with basic office software including word processing, spreadsheet, Outlook and calendaring.

Must have some basic mechanical assembly knowledge.

Experience using hand tools is preferred.

Must occasionally lift and/or move up to 50 pounds

Regularly required to sit and use hands to handle or feel and regularly required to walk, stand, and bend in the performance of daily responsibilities

Must be able to work on and around heavy equipment including the ability to climb on and off large machines.

The pay range that the employer in good faith reasonably expects to pay for this position is $42.53/hour - $66.45/hour. Our benefits include medical, dental, vision and retirement benefits. Applications will be accepted on an ongoing basis.

Tundra Technical Solutions is among North America’s leading providers of Staffing and Consulting Services. Our success and our clients’ success are built on a foundation of service excellence. We are an equal opportunity employer, and we do not discriminate on the basis of race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability, genetic information, or other applicable legally protected characteristic. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law, including the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Unincorporated LA County workers: we reasonably believe that criminal history may have a direct, adverse and negative relationship with the following job duties, potentially resulting in the withdrawal of a conditional offer of employment: client provided property, including hardware (both of which may include data) entrusted to you from theft, loss or damage; return all portable client computer hardware in your possession (including the data contained therein) upon completion of the assignment, and; maintain the confidentiality of client proprietary, confidential, or non-public information. In addition, job duties require access to secure and protected client information technology systems and related data security obligations.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electrical Engineer
Electrical Engineer

Capgemini • Logan (UT)

On-site
USD 59,000 - 92,000
Medical benefits
Dental benefits
Vision benefits
+1
Technical Design 3
Technical Design 3

Boeing Co. • Oklahoma City (OK)

On-site
USD 50,000 - 56,000
Medical insurance
Dental insurance
Vision insurance
+1
Product Repair/Mod Tech B (contract)
Product Repair/Mod Tech B (contract)

Boeing • San Antonio (TX)

On-site
USD 41,000 - 45,000
Medical insurance
Dental insurance
Vision insurance
+1
Hardware design Engineer (contract)
Hardware design Engineer (contract)

Capgemini • Irvine (CA)

On-site
USD 60,407 - 94,379
Medical benefits
Dental benefits
Vision benefits
+1
Test Engineer III
Test Engineer III

Capgemini • Logan (UT)

On-site
USD 54,000 - 85,000
Senior Hardware Design Engineer - Automotive ECUs
Senior Hardware Design Engineer - Automotive ECUs

Capgemini • Irvine (CA)

On-site
USD 60,407 - 94,379
Medical benefits
Dental benefits
Vision benefits
+1
US_West | Electrical/Electronics & Semiconductors Engineer_L2
US_West | Electrical/Electronics & Semiconductors Engineer_L2

Expedite Talent Solutions • Bloomfield (NJ)

On-site
USD 85,000 - 105,000
Wire Design and Install Engineer 4
Wire Design and Install Engineer 4

Boeing Co. • Long Beach (CA)

On-site
USD 118,000 - 125,000
Medical
Dental
Vision
+1
Electrical Systems Analyst
Electrical Systems Analyst

Capgemini • Auburn Hills (MI)

On-site
USD 46,000 - 72,000
Electrical Assembler
Electrical Assembler

Boeing Co. • Mesa (AZ)

On-site
USD 28,000 - 34,000
Medical
Dental
Vision
+1