ROBOT WELDER 2nd shift

WILL BURT CO

Orrville (OH)

On-site

USD 32,000 - 34,000

Full time

44 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Shift differential

Job summary

WILL BURT CO in Orrville, OH seeks a CNC Welding Robot Operator to set up and run welding robots for assembling machinery frames and components. The role requires reading blueprints, planning sheets, and data to determine tooling, settings, and welding sequences.

The ideal candidate will mount, align, and secure tooling, load control media, run and monitor robots, and troubleshoot malfunctions. A 1-year certificate or equivalent training is expected, with OSHA/ AWS D1.1 knowledge a plus.

Qualifications

  • One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.
  • Ability to read and interpret blueprints, planning sheets, sketches, and related data to determine tooling requirements and welding methods.
  • Ability to write routine reports and correspondence.

Responsibilities

  • Reads and interprets blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, setup procedures, control settings, and welding methods and sequences.
  • Starts and operates machine and monitors machine operation to detect malfunctions; adjusts controls to correct issues.
  • Loads control media in machine controller or enters commands to retrieve preprogrammed instructions; ability to write and edit programs in software package.
  • Lays out, positions, aligns, and fits components for welding; finishes weld parts and cleans weld spatter.

Skills

Blueprint reading
Welding robot operation
Troubleshooting
Program editing

Education

Technical certificate (1 year) or short-term training

Job description

  • Base Pay $23.00 - $25.00 / Hour
  • Other Compensation 1.00/hr shift diff
  • Employee Type Non-Exempt

Description

SUMMARY

Sets up and operates numerical control welding robots to weld components to assemble structure forms such as machinery frames, or miscellaneous parts by performing the following duties

ESSENTIAL DUTIES AND RESPONSIBILITIES
  • Reads and interprets blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, setup procedures, control settings, and welding methods and sequences.
  • 5% - Mounts, aligns, and secures tooling, attachments, and workpiece on machine.
  • Loads control media such as tape, card, or disk, in machine controller or enters commands to retrieve preprogrammed instructions from data base. Ability to write and edit programs in software package.
  • 20% - Starts and operates machine and monitors machine operation to detect malfunctions. Enters commands or manually adjusts machine controls to correct malfunctions or out-of-tolerance parts
  • Discusses control media errors with supervisor or programming personnel to resolve problems.
  • Setup weld equipment to support robot welding functions.
  • Discusses tooling requirement with tool room to support the effective and efficient operations of the robot work cell.
  • 5% - Cleans machineand tooling. Performs machine maintenance.
  • 35% - Lays out, positions, aligns, and fits components together. Bolts, clamps, and tack-welds parts to secure in position for welding.
  • 35% - Finish weld parts as necessary and cleans weld spatter and metal finish parts as necessary.
  • Other duties may be assigned.
REQUIRED COMPETENCY

To perform the job successfully, an individual should demonstrate the following competencies:

Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality.

Quantity - Meets productivity standards; completes work in timely manner; strives to increase productivity; works quickly.

Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly.

SUPERVISORY RESPONSIBILITIES

This job has no supervisory responsibilities.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read and interpret documents such as Blueprints, safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

CERTIFICATES

AWS D1.1

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually loud.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Robotic Welder 2nd Shift
Robotic Welder 2nd Shift

H O Bostrom • Waukesha (WI)

On-site
USD 30,000 - 41,000
Robotic Welder 2nd Shift
Robotic Welder 2nd Shift

H O Bostrom • Waukesha (WI)

On-site
USD 32,000 - 40,000
Robotic Weld Operator
Robotic Weld Operator

Mobile Track Solutions LLC • Elkader (IA)

On-site
USD 48,000 - 66,000
Robotic Welding Operator & Programmer
Robotic Welding Operator & Programmer

Steele Solutions Inc. • Waupaca (WI)

On-site
USD 42,000 - 66,000
Robotic Welder: Precision Fabrication Specialist
Robotic Welder: Precision Fabrication Specialist

Mobile Track Solutions, L.L.C. • Iowa

Hybrid
USD 25,000 - 39,000
Manual Welder - 2nd Shift
Manual Welder - 2nd Shift

MEC (Mayville Engineering Company, Inc.) • Town of Mayville (WI)

On-site
USD 40,000 - 56,000
Robot Operator - 1st Shift and 2nd shift Temp to Direct
Robot Operator - 1st Shift and 2nd shift Temp to Direct

McAlpin Industries Inc. • Town of Webster (NY)

On-site
USD 38,000 - 52,000
Robot Setup Operator 1st Shift
Robot Setup Operator 1st Shift

Bruno Independent Living Aids • Town of Oconomowoc (WI)

On-site
USD 30,000 - 39,000
Welder
Welder

Venom Fabrication LLC • Lubbock (TX)

On-site
USD 24,796 - 38,572
Welder
Welder

Faxon Machining • Cincinnati (OH)

On-site
USD 25,000 - 39,000