Rigger

Taurus Industrial Group

Freeport (TX)

On-site

USD 52,000 - 76,000

Full time

12 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Taurus Industrial Group is seeking a skilled Rigger in Texas to ensure safe movement and securing of loads using cranes and rigging gear. You will work with crane operators and craft personnel, perform lift planning, and follow OSHA and site procedures.

This role requires basic rigging knowledge, ability to read lift plans, and physical stamina to work outdoors in varying conditions. Overtime and travel may be required.

Qualifications

  • High school diploma or GED preferred.
  • Minimum of one year rigging experience.
  • TWIC credential may be required depending on project location.
  • Must be willing to work overtime, weekends, and travel as required.
  • Able to read lift plans and understand load weights.

Responsibilities

  • Inspect and select appropriate rigging equipment for lifts.
  • Attach, secure, stabilize, and guide loads during moves.
  • Signal and communicate with crane operators for lifts.
  • Inspect rigging gear before use; remove damaged gear.
  • Assist in loading, unloading, and repositioning materials.
  • Verify load stability and proper rigging techniques.
  • Participate in lift planning and hazard assessments.
  • Follow OSHA, company, and client safety requirements.
  • Work at heights and in varying weather conditions.

Skills

Rigging knowledge
Load securing
Communicating with crane operators

Education

High school diploma or GED

Tools

TWIC card

Job description

Rigger

Operations E & I Full Time Technical Freeport, TX, US

Location: Bay City, TX

Summary

The Rigger is responsible for safe and efficient movement, lifting, positioning, and securing materials, equipment, and structural components using cranes, hoists, chain falls, and other rigging equipment. This position works closely with crane operators, supervisors, and craft personnel to ensure all lifting activities are performed safely and in accordance with company policies and project requirements.

Qualification Requirements

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Minimum Qualifications

  • High school diploma or GED preferred.
  • Minimum of one (1) year of industrial, commercial, or construction rigging experience preferred.
  • Current TWIC card may be required based on project location.
  • Ability to pass all pre-employment screenings and site-specific requirements.
  • Must be willing and able to work overtime, weekends, and travel as required.

Knowledge, Skills, and Abilities

  • Knowledge of rigging practices, equipment, and safe lifting procedures.
  • Ability to identify proper slings, shackles, hooks, chains, and other rigging components for various lifts.
  • Understanding of load weight calculations, sling angles, and center-of-gravity principles.
  • Ability to inspect rigging equipment and identify unsafe or defective conditions.
  • Ability to communicate effectively with crane operators using standard hand signals and radio communication.
  • Ability to read and understand lift plans, safety procedures, and project specifications.
  • Strong commitment to workplace safety and hazard recognition.
  • Ability to work effectively as part of a team in a fast-paced industrial environment.
  • Ability to perform physically demanding work in varying environmental conditions.

Essential Functions

  • Inspect and select appropriate rigging equipment for lifting operations.
  • Attach, secure, stabilize, and guide loads during lifting and moving activities.
  • Signal and communicate with crane operators to safely execute lifts.
  • Inspect rigging gear before each use and remove damaged equipment from service.
  • Assist in the loading, unloading, relocation, and positioning of materials and equipment.
  • Verify load stability and ensure proper rigging techniques are utilized at all times.
  • Participate in lift planning and hazard assessments prior to performing work.
  • Follow all OSHA regulations, company policies, and client safety requirements.
  • Maintain clean and organized work areas.
  • Attend safety meetings, training sessions, and toolbox talks as required.
  • Work at heights, in confined spaces, and in varying weather conditions as necessary.
  • Perform other duties as assigned by supervision..

Physical Demands

  • Ability to stand and walk for extended periods and frequently bend, stoop, kneel, crouch, squat, reach, climb, balance, push, and pull while performing welding and fabrication activities.
  • Ability to perform welding in multiple positions and body orientations, including standing, kneeling, crouching, bending, and working in restricted-access areas.
  • Ability to perform repetitive hand, arm, and upper-body movements associated with welding, grinding, cutting, fitting, and material handling.
  • Ability to lift and carry up to 50 pounds regularly and handle heavier materials or equipment using appropriate assistance or material-handling equipment.
  • Ability to climb stairs and ladders and work from scaffolds, elevated work platforms, pipe racks, and other industrial work areas as required.
  • Ability to work on uneven, muddy, rocky, or otherwise variable walking and working surfaces.
  • Ability to work outdoors in heat, humidity, cold, rain, wind, and other weather conditions.
  • Ability to wear required personal protective equipment (PPE), including but not limited to:
  • hard hat, safety glasses, welding hood, face shield, gloves, hearing protection, FR clothing, steel-toed footwear, FR clothing, fall protection, respiratory protection and other project-specific PPE.
  • Work is primarily performed at active industrial construction, maintenance, turnaround, and customer facilities.
  • Work may be performed in refinery, petrochemical, chemical, LNG, power generation, manufacturing, and other heavy industrial environments.
  • Regular exposure to outdoor weather conditions, temperature extremes, noise, vibration, dust, dirt, fumes, moving equipment, piping systems, and other conditions typical of industrial construction and maintenance.
  • Regular exposure to welding arcs, sparks, hot metal, welding fumes, gases, noise, vibration, dust, moving equipment, outdoor weather conditions, temperature extremes, and other conditions typical of industrial welding and construction.
  • Work may be performed around operating process units, piping systems, elevated work areas, excavations, structures, mobile equipment, and ongoing construction or maintenance activities.
  • Work may require the use of ladders, scaffolds, elevated work platforms, fall-protection systems, ventilation equipment, and respiratory protection as applicable to assigned work.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Welder
Welder

Taurus Industrial Group • Freeport (TX)

On-site
USD 65,000 - 90,000
Advanced Rigger
Advanced Rigger

Palacios Marine & Industrial Coatings, Inc. • Pasadena (TX)

On-site
USD 30,000 - 47,000
Advanced Rigger
Advanced Rigger

Palacios Marine & Industrial • Pasadena (TX)

On-site
USD 45,000 - 65,000
Ironworker - Baytown, TX
Ironworker - Baytown, TX

Taurus Industrial Group • Deer Park (TX)

On-site
USD 30,000 - 47,000
Ironworker/Rigger
Ironworker/Rigger

Bodell Construction • Ogden (UT)

On-site
USD 70,000 - 90,000
Rigger
Rigger

JHA Safety LLC dba Optimum Mechanical Services • Beaumont (TX)

On-site
USD 40,000 - 70,000
Competitive wages
Career training
Safety-focused culture
Rigger
Rigger

Gulf Crane Services Inc • Duson (LA)

On-site
USD 60,000 - 90,000
Rigger
Rigger

Tri-State Rigging, LLC • Owensboro (KY)

On-site
USD 42,000 - 64,000
Health insurance
Dental & vision insurance
Company paid life insurance
+3
Rigging Specialist
Rigging Specialist

Imoco Inc. • Fletcher (NC)

On-site
USD 28,000 - 41,000
Life insurance
Paid Holidays
401(k)
+7
Rigger
Rigger

QPS Flint • Texas

On-site
USD 28,000 - 39,000